Jump to content

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By timelord9
      Item: Vincent Audio SV237. Black. 
      Location: Melbourne
      Price: 1300 dollarydoos.
      Item Condition: Excellent
      Reason for selling: Raising capital for domestic transducer development.
      Payment Method: Pickup - Cash, COD Only
      Extra Info: Purchased 2nd hand last year, this amp has seen very little use. I have the original box, but its super heavy and (at this stage) would prefer not to post. The amp is in perfect working order and buyers can demo with my Focals. Pick up from Thornbury or Abbotsford.  
      Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB, 20 Hz - 50 kHz +/-2 dB Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt Nominal Output Power Class A / 8 Ohm: 2 x 10 Watt Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) Input Sensitivity: 300 mV Signal-Noise Ratio: > 90 dB Input Impedance: 47 kOhm Inputs: 4 x Stereo RCA, 1 USB Outputs: 1 x Stereo RCA Pre Out, 1 x Stereo RCA Rec Out, 4 x 2 Speaker Terminal, 2 x 3.5 mm Jack (Power Control) Tubes: 1 x 12AX7; 2 x 6N1P-EV Colour: Black  Weight: 20.4 kg Dimensions (WxHxD): 430 x 152 x 435 mm  
      Comes with remote. 
      Note: This is the original SV237. The link below is with the updated digital input.

    • By olegau
      Item: HiFi stereo system
      Location: Melbourne 3183
      Price: 1200
      Item Condition: very good
      Reason for selling: too many stereo systems
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Carefully selected Hi-Fi stereo system. All in good condition and working order.
      Separated sale:
      1. ROTEL RA-980BX Integrated Amplifier $390
      The amp was checked and serviced recently.
      It has OP amp sockets, DIYer could change the OP amps to get different sound. Open the the top cover and then change the OP-Amp you like.
      There are three pairs of Ops: original AD712 (vintage sift sound, JRC4558 (modern  more clean and detailed sound) and LM4562 (bit more detaied). Currently installed LM4562. Many other OP-Amp suits for this amp.. 
      Power output: 100 watts per channel into 8Ω (stereo)
      Total harmonic distortion: 0.03%
      Dimensions: 440 x 121 x 347mm
      Weight: 10.1kg

      2. Speakers: Ascension Woodfox Ribbon 822SRTL Bookshelf Speakers. $890
      Dimentions: 500 H, 270mm W and 315mm Depth. Weight is approximately 18kg each. High quality woofer using an Papyrus cone, ribbon tweeter, Rose Mahogany Veneer.
      Two years old.
      Power 120W
      8 ohms
      Sensitivity 91db
      3.  Sold.  Subwoofer: Infinity Primus PS-8 $170
      See spec attached
      Photos: Advertisements without photos of the actual item will not be approved.



    • By aris
      Item: Yamaha A-S1000 Integrated Amplifier (Black)
      Location: Melbourne (Local pickup only, I don't have the box).
      Price: $700 (was $850).
      Item Condition: Good
      Reason for selling: Clearing out the 2nd system
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Specifications are available on Yamaha's site - https://au.yamaha.com/en/products/audio_visual/hifi/a-s1000/index.html
      At 105W in to 8Ohm (220W into 2Ohm) this has no trouble driving Harbeths and PMC's.
      Note, I'm not the first owner (I purchased through a local (Melb) seller on SNA about 12-18 months ago).
      I'm currently running Harbeth Compact 7ES-3 with this amplifier, and it really is a great match.
      The amplifier has MM and MC phono stage, currently using a Rega Planar 3 (MM) very nicely.
      I don't have the original remote, but use a universal Logitec to good effect, which I'll include in the bundle if the buyer wants it (nothing fancy, does the job - volume, input selection etc).
      There is one minor dint along the top faceplate (see 1st photo, above the Balance knob).
      One of the great features is the Direct Input, which allows you to run a pre-amp into it (I'm using a RME DAC to good effect).


    • By Karel
      Item: Cambridge Audio Azur 540A
      Location: Sydney, Chatswood area
      Price: $100
      Item Condition: Very good
      Reason for selling:  No longer used
      Payment Method: Pickup only
      Extra Info:
      Old favourite, great sound for little money.  No remote. Very good condition.
      Manual & specs:  https://techsupport.cambridgeaudio.com/hc/en-us/article_attachments/205263809/Azur_540A-640A_User_Manual_-_English.pdf
      Photos: Advertisements without photos of the actual item will not be approved.

    • By DubbyMcDubs
      Item: Cayin CS-88A Integrated Valve Amplifier
      Location: Central Coast NSW
      Price: $2,750 ono
      Item Condition: Mint, As New
      Reason for selling: Upgrading/Change of direction
      Payment Method: Pickup - Cash, EFT, Paypal + 2.6%, COD Only
      Extra Info:
      I have owned this amp since July this year. Originally purchased in preparation for a setup with Klipsch Cornwall III speakers, however I went a different route and ultimately purchased Revel M106’s. While this is an exceptional sounding valve amplifier it is not really matched well with the Revel’s and I will be upgrading to a Benchmark system. The build quality is exceptional, regardless of price. Selling to help fund the upgrade.
      This amp is in mint as-new condition, with no more that 5 hours use on it total. I have all of the original packaging and accessories. 19 months warranty remaining.
      Retails for $3,499. Selling $2,750 ono
      Happy to post if buyer pays postage, but realize its a very heavy item.
      Power Output: 25 Watts per channel (Triode) 45 Watts per channel (Ultra-Linear) Frequency Response: 10Hz - 42kHz (-3dB) Total Harmonic Distortion (THD): 1% (1kHz) Signal to Noise (S/N) Ratio: 93dB Line-Level Inputs: Two Phono Input (MM) Pre-Amp Input: One stereo preamp input – allows the CS-88A to be used as a power amp only Construction: Hand-made construction with silver point-to-point wiring Power Supply: Specially designed toroid transformer for the power supply Pre-Amplifier: Two 6SL7 and two 6SN7 valves are used in the preamp stage Four KT88 valves are used in Class AB1 push-pull output stage Triode and Ultra-linear selection via remote Bias Adjustment: Easy valve bias adjustment using the top mounted bias meter Rear Panel Switch: Switch easily between the supplied KT88 output valves or optional EL34 valves via a convenient rear panel switch Remote Control Soft Start Function: 30 second soft start function - extends the life of internal components and valves Memory: CS-88A stores last usage settings once turned off Volume Control: High-quality Japanese ALPS motorised potentiometer (volume control) Silver Plating: Heavily silver-plated signal cables are used throughout Cover: An easily removed cover is provided for protection from hot valves Speaker Binding Posts: Accepts Banana plugs or spade terminals Output Impedance: 4 Ohms and 8 Ohms Power Cord: Standard IEC that can be easily upgraded. Dimension (WxHxD): 420 × 195 x 382 mm Net Weight: 28kg

  • Create New...