Recently Browsing 0 members
No registered users viewing this page.
Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Bendigo State: Victoria Payment Method: EFT Reason for selling: NLR Further information:
Graham Slee RRP $600
Cusat50 interconnect, 60cm
Spatia speaker cables banana plugs, 3m
All cables in excellent condition. Open to reasonable offers.
Item Condition: As New Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: Kurraba Point State: New South Wales Payment Method: Paypal gift, Bank Transfer, Cash on Pickup Reason for selling: Bought a smart TV Further information:
One Google Chromecast Ultra in as new condition (no box). Bought brand new from The Good Guys late 2019. Have since bought a smart TV so don't need the streaming capabilities of the Chromecast.
Shipping to anywhere in AUS is included in price.
Photos: Advertisements without photos of the actual item will not be approved.
Price: $1300 Item Condition: As new, barely used Shipping Options: Shipping is included in price. Suburb or Town: Canberra State: Australian Capital Territory Payment Method: Bank transfer Reason for selling: Due to space limitations for speakers, I moved to a headphone only set up and there do not require an amplifiers and speakers Further information:
They have won a HiFi Pig award.
Item Measurement Power output (rms) measured 26 Watts into 8 Ohms; 45.5 Watts into 4 Ohms (ref 1% THD+N at 1kHz) Power bandwidth at rated power into 8 Ohms 10Hz - 47kHz (-3dB), 20Hz - 25kHz (-1dB) Power bandwidth at rated power into 4 Ohms 12Hz - 40kHz (-3dB) Total harmonic distortion and noise at 8 Ohms 100Hz: 0.043%; 1kHz: 0.047%; 5kHz: 0.061%; 10kHz: 0.085%; 20kHz: 0.125% Total harmonic distortion and noise at 4 Ohms 100Hz: 0.066%; 1kHz: 0.071%; 5kHz: 0.094%; 10kHz: 0.129%; 20kHz: 0.181% Signal to noise ratio in dB "A-weighted": 87dB; 22Hz-22kHz "Q-pk": 80dB Bias type Class Ab; Bias current: 60mA (approx.) Input sensitivity for rated output 575mV rms Short circuit protection Fuse and power supply shut-down (short circuits should be avoided to prevent component stresses) Fuse F2A 5mm x 20mm (glass "quick-blow" fuse rated at 2A) Power supply 48V DC, 120 Watt - self adjusting to AC mains 100V - 240V, 47 - 63 Hz; IEC cord supplied Size (approx.)
Amp W105 x H55 x D205 mm; Power supply W65 H40 D170 mm Photos: Advertisements without photos of the actual item will not be approved.
By Guest gmdb
Item: Graham Slee Reflex C Phono Amp (MC carts only), including PSU1
Item Condition: Very good to excellent. (Phono amp is near mint. The PSU has a little wear from being located on the floor. See images.)
Reason for selling: Using a Cinemag SUT with a Graham Slee Reflex M
Payment Method: Can be picked-up in Brisbane, or will post express for $10. Cash for pick-up is OK. Otherwise Paypal or bank transfer is available.
Extra Info: Pictures were taken this afternoon and are of the item for sale. I tried to get as many angles as possible to show that there is very little wear on the enclosure. I'm the original owner of this phono amp. It's only ever been used in a smoke-free household, and has been well-looked after. It has 62 db of gain and loads at the standard 100 Ohms for an MC head amp. Full specs:
Input range: 0.2mV to 1.0mV
Output (for input range): 252mV to 1,260mV (1.26V)
Maximum input: 3.9mV rms
Maximum output: 4.914V rms
Gain: 62dB (1,260) at 1kHz
Input impedance: 100 Ohms
Output (driving/source) impedance: 1k Ohm
Recommended load impedance: 10k Ohm or greater
Noise at output: -62dB CCIR Q-pk
Equivalent input noise (EIN): -124dB
RIAA accuracy: <0.5dB
Frequency response: 20Hz - 200kHz (flat, corrected to RIAA)
Channel balance: 0.2dB
Channel separation: 64dB
Size: (approx.) W: 107 x H: 50 x D: 180 (mm) inc. jacks
Item: Wyred4Sound Remedy Reclocker + Gieseler Linear Power Supply
Location: Cleveland, QLD (4163)
Price: $475 (Shipping +$15, PayPal +3%)
Item Condition: Used, very good condition
Reason for selling: No longer required.
Payment Method: Pickup - Cash, Paypal (+3%) , Bank Transfer
Listing is for a Wyred4Sound Remedy Reclocker (purchased 20-Oct-2015) and a Gieseler Linear PSU (purchased 31-Dec-2015), original Australian printed invoices are included for both items.
Used between a Sonos Connect and a Devialet 120 to great effect, reduced jitter was immediately noticable and converted the Connect into a high-performance device.
Although the reviews for the Reclocker have generally been very positive, I've found that the performance jump added when using the Gieseler Linear PSU to the Reclocker took its performance into a whole new realm (a bigger jump than the reclocker itself out of the box!) , and once heard with it, couldn't recommend listening without it. I've found the performance jump gained with this combo scales well when using even better sources/dac, not just entry/mid level etc.
Current RRP $870+
Reclocker Features (from website):
Utilizes an incredible Femto-grade clock Superior jitter reduction Toslink and Coaxial digital inputs Toslink, Coaxial, BNC digital outputs 96kHz output sampling frequency* Digital inputs support up to 24/192kHz 9VDC power supply included 5 year warranty
Gieseler Linear PSU:
This linear low noise DC power supply is designed to improve the performance of digital audio accessory devices that are normally powered by small SMPS plug-packs. All the internal components are of high quality & are selected for reliability & sound quality where applicable. Capacitors are Nichicon Fine Gold, Panasonic or Elna Silmic II’s. It is powered by external IE core transformers. These have a distinct advantage over the usual Toroidal type as they have better isolation between the windings & lower bandwidth means less HF noise coming in via the mains. Also being external there is less radiated hum entering the power supply circuitry. Noise, hum & ripple levels are very low due to the common mode choke pre filtering & low noise Linear Technology high performance regulators. Also what helps to reduce noise as well is the use of Schottky diodes & a transformer LC snubber. The DC output cable/connection is an area that is often neglected; so I have gone to extra lengths here to get it right. The DC output on the supply uses a Neutrik 6 Amp XLR gold pin socket. The supplied DC cable uses a matching Neutrik gold pin plug hand soldered to a 10A lead with moulded DC barrel connector for ruggedness.
Noise level is approximately 20 uV to 40 uV d. Ripple & hum rejection is approximately 100 dB. Short circuit & thermal protection.