Jump to content

  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By drainer2011
      Item: Dynaudio Focus 200XDs (decided to keep connect box and iso pucks so only selling speakers now see below price change.
      Location: Melbourne 
      Price: $4000
      Item Condition: Used. Near brand new no marks at all.
      Reason for selling: NLR
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:In perfect condition. Connect box and iso pucks NOT included in price. Price negotiable within reason.
       
      RRP when purchased in 2017 was
      Dynaudio Focus 200XDs- $7499

       
      Photos:
      I’llAdvertisements without photos of the actual item will not be approved.
       
       
       
       


    • By lenticularis
      Item: Dual CS503-2
      Location: Canberra
      Price: $300 ONO
      Item Condition: Excellent ( lid is Good, with some marks)
      Reason for selling: Upgrading
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Bought in the noughties, stored since 2008, recently re-tested. It works well and compared favourably when trialled in a local shop against a Rega Planar 2 with the baseline cartridge. I'm interested in buying an RP3, hence selling this.
      Used very little. Cartridge and stylus in great condition. Had good quality gold-plated RCA plugs and a 'Monitor Q-LOW LOSS OFC' cable replaced before my purchase. No box, but can pack well for postage at buyer cost. I can supply more photos if required. 
       
      Photos: Advertisements without photos of the actual item will not be approved.
       
       
       
       

       
       





    • By gypr1961
      Item: Avantgarde Zero 1 XD Active Speakers DSP
      Location: Brisbane
      Price: $19,000 + shipping
      Item Condition: Mint
      Reason for selling: Time for a change
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:

      These are the top of the line model, above the pro model and come with DSP, digital and an analogue (A/D card) for turntables etc.
       
      They are incredibly dynamic! They sound just as good when theyre shaking the house or playing whisper quiet. 
       
      I have all original packing
       
      As im going to need a complete new system Im happy to look at trades + cash
       
       
      Specs can be found here https://www.avantgarde-acoustic.de/en/products/zero-serie/zero-1-xd.html
       
       
       
       



    • By Paul_B
      Item: Whatmough S33i Signatures
      Location: Cheltenham can post at buyers expense. Won’t be cheap they are large and heavy. 
      Price:  $6500 open to realistic offers. 
      Item Condition: 18 months old still Like new. Have original packaging. 
      Reason for selling: no room for hifi equipment 
      Payment Method: Pickup - Cash, Bank Transfer 
      Extra Info:
       I’m regretfully selling these but with my move to QLD  I don’t have room for a large hifi system. They are located at my old work The Audio Experts / Whatmough Audio in Cheltenham and can be picked up from there.  
       
      these are a beautiful sounding speaker they are still a current model and retail at $11,499 they perform well above price range. 

      If they sell at $6500 I’ll include the upgraded isolation feet.  
       
      Description
      Whatmough S33i 3-Way Floor-Standing Speakers
      Overview
      The Whatmough S33i floor standing speakers are the ultimate speaker in the Whatmough Signature series. Their design and built quality are up to the audiophile standards.  The S33i delivers truly spectacular sound.
      The Signature S33i are based on the Performance Series P33i, with significant improvements to bring them up to Signature Series status.
      Cabinet
      This cabinet design offers more than just great looks – they also offer improved sound quality.  By eliminating internal parallel surfaces, the curved surfaces offer clearer and cleaner sound by minimizing internal standing waves.  Even more significantly, the curved panels are inherently more rigid and less resonant than the flat panels of a conventional speaker cabinet, which further helps to minimize coloration.
      Tweeter
      The Signatures S33i uses the same Ring Radiator tweeter that is used in Whatmough’s flagship speaker, the Paragon. This ultra-expensive tweeter sounds incredibly fast and detailed while also sounding extremely smooth and open. It has a very flat response extending to beyond 40KHz.
      Midrange
      The Signature S33i uses a 100mm cellulous fibre coned mid-range driver. This driver has the speed and transparency no bass/mid driver can match.
      Bass
      The Signature S33i uses two 170mm fiberglass/nomex hybrid drivers especially developed for these speakers. The cone for this speaker is made of Nomex with a skin of fiberglass. This long throw driver uses a 33mm high temperature voice coil and a large double magnet system.
      This driver has very high power handling as well as a very transparent detailed sound quality.
      Crossover
      The S33i uses high grade audiophile film and foil capacitors in critical positions.  Air cored coils are used throughout, wound from a heavier grade of high purity Australian copper.
      System
      The perfect partner in the Signature Series system featuring the S8i in the centre and P12i or PFX3i speakers in the rear for a truly exceptional home cinema surround sound experience.
      The S33i is fully made in Australia.
       
      Configuration
      3-way bass reflex enclosure using two 170mm hybrid fibre cone long elbow bass drivers, a 100mm cellulose fibre midrange driver and a 35mm dual concentric tweeter with wave guide centre plug.
       
      Nominal Impedance 4 Ohms
       
      Amplifier Power Requirement 25-150 watts RMS
       
      Power Handling
      Transient level in excess of 300 watts with an average level of 120 watts.
       
      Sensitivity
      88dB input level of 2.83V. (1 watt into 8 ?)
       
      Frequency Response
      38Hz to 40kHz ± 3dB
       
      Dimensions
      260W x 1200H x 430D mm

      Weight 45kg each

      Finish
      Real Bubinga Timber Veneer or Piano Graphite
       
      Warranty 5 Years*



      Photos:
       
      Advertisements without photos of the actual item will not be approved.
    • By HiFiArk
      Item: Sansui SR-212 Vintage 70s Turntable - Japan - Professionally Restored & Upgraded
      Location: Sydney
      Price: $450, open to reasonable offers
      Item Condition: Very Good, recently serviced/restored/upgraded and working.
      Reason for selling: No longer required
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      I recently inherited this Sansui SR-212 turntable , which is of 1970s vintage and is made in Japan. The turntable employs a unique multiple suspension/insulation system to eliminate howling ( it has a suspended sub-chassis design). 
       
      The deck is in really nice condition, no major blemishes to speak of. Even the lid is in good condition, no cracks and the hinges also appear to be working fine.
       
      It did need some minor repair work to get it up and running, so I engaged Chris from Spin Doctor Music here in Sydney to repair/restore the deck for me which he did very well.
       
      In the process the following upgrades were also made to the deck :
      Brand new drive belt Brand new Jelco HS-25 cartridge shell was purchased and installed onto the tonearm Brand new Ortofon 2M Silver MM phono cartridge was purchased, installed and aligned Brand new AUS power cord was installed  
      Initially I thought I might use this Sansui TT in a second system, but It turns out that I won't be making use of it after all.
       
      So , it's up for sale now to someone who can make use of it.
       
      Everything is in good working order, including the arm cueing and auto-return mechanism. Platter speed has been tested by Spin Doctor Music and is accurate and stable at both 33.1/3 and 45 speeds.
       
      Some more info and general specs on this turntable are available here:
      https://www.vinylengine.com/library/sansui/sr-212.shtml
       
      Note of course that this one has the Ortofon 2M Silver cart and Jelco headshell upgrades. The Ortofon 2M Silver seems to sit between the 2M Blue and the 2M Bronze in the Ortofon 2M lineup.  I will also provide the original headshell and also the (probably very worn out) original SC-37 IM cartridge.
       
      I don’t have any boxes or packaging for the deck, so I would prefer local pickup from Sydney.
       
      I've also got the original operation manual for it.
       
      The new Ortofon 2M Silver cartridge and Jelco HS-25 headshell together alone would cost over $400 RRP. 
       
      Buyer will need to add their own RCA-RCA phono cable to connect the deck to an amp/phono stage.
       
      Local pickup Sydney only. COD payment is easiest, or happy to receive a bank/BSB or PayPal Friends transfer before pickup.
       
      Photos: Advertisements without photos of the actual item will not be approved.










×
×
  • Create New...