Jump to content

SOLD: FS: Shunyata Taipan power cable 1.8m Australian Furutech plug

Recommended Posts

Item Condition: Excelence condition
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Noble Park
State: VIC
Payment Method: Bank transfer, COD
Reason for selling: No longer require

Further information: Cable in excelence condition. This cable is one of the early Shunyata which made Them famous. The cost of Australian Furutech gold plate and Furutech IEC gold plate is $235. So the cable is very good price. Post at buyer cost. Will donate after sale.




  • If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved
  • If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item
  • If you don't include photographs of the actual item being sold, your ad will not be approved
  • You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    - if you have previously sold items and not made a donation, your advertisement may not be approved.




Link to post
Share on other sites

SHUNYATA RESEARCH make fabulous cables; this early TAIPAN with FURUTECH Connectors is a very rare beast! GLWTS.

Link to post
Share on other sites
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NigelP
      Item Condition: Used (as new) Shipping Options: Pickup available and you can audition.,Shipping is available at agreed cost. Suburb or Town: LILYDALE State: Victoria Payment Method: PayPal, Direct Deposit, Cash on pickup Reason for selling: Prefer R2R for my setup Further information: 
      As new, just over 1 month old, comes in original packaging with all accessories:
      USB Cable
      Power Cord
      Bluetooth Antenna 
      Great sounding all rounder with good bass.
      See Link below for review:

    • By Hanson
      Item: Cary 306 Pro CD
      Location:Glen Waverley
      Price: 2000.00 ONO
      Item Condition:8.5/10 Remote Control & box & Book
      Reason for selling: Upgrade
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Original condition Payer pay post
      Photos: Advertisements without photos of the actual item will not be approved.

    • By wolfz
      Item: Corda Classic Headphone Amp
      Location: Goldcoast
      Price: $ 400
      Item Condition: used / exellent
      Reason for selling: using all in one amp/dac
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       A few tiny marks (edge), not easy to see, no original box. Normal retail price new is $800.
      A very good sounding amp with two crossfeed stages and two gain settings. Tried a number of headphones with this amp ( HD800, SIG Pro, Alessandro MS Pro, HD600 & 650, T1, DT880 ).
      Every headphone sounded good with this amp esp. the Beyer T1.  The DT880 was  lacking a bit bass.
      Tech Data copied from Meyer:
      Sure, from the outside the CLASSIC looks very modest and plain. However, technically and sonically this is the best and most advanced amplifier that we've ever build.

      Of course this amplifier also uses the concept of active balanced headphone ground. Within this concept each headphone connection wire carries an additional signal such that the sum of the potentials of the wires equals zero. This strongly minimizes the energies stored and released in the electrical fields inside the headphone cable when an audio-signal is applied. The influence of the wire on the sound is thus reduced.

      Moreover, with active ground pollution of the internal signal ground by strong driving currents is eliminated and the power-supply-rejection-ratio at the output stages is strongly improved. Thus the best conditions are given for a clean and undistorted sound.

      Active balanced headphone ground offers most of the advantages of a true balanced headphone setup without the need of balanced connections. It can be used with any conventional dynamic or magneplanar headphone.

      The volume control is technically very sophisticated. The position of the potentiometer is measured with the use of an AD-converter. The output of this converter is then used to switch a bank of relais to set the proper volume level. There are a total of 64 levels which allows for very small stepsizes and a very analog feeling. The advantages of this concept are strongly reduced channel-imbalances and a much cleaner and more detailed sound. The use of a conventional stereo-potentiometer does add its own sonic signature which is now prevented.

      The amplification section is build around AD797 opamps biased into class-A. For the output stages BUF634 buffer amplifiers are used. These integrated circuits are very fast and thus allows the output signals to follow the input signals very closely. The amp is DC-coupled and any capacitors found in the signal path are of the highest quality polypropylen and polystyrol.

      A very extensive powersupply, a large number of power-regulators, and a total filter capacity of 80.000 microF (!!) assure the best working conditions for any part of the circuitry.

      The built-in crossfeed filter is a frequency-extended version of the natural crossfeed found in previous CORDA amplifiers and provides even better imaging. It also offers three intensity levels (Stereo, medium, high). To compensate for the psycho-acoustic bass-loss a separate switch allows to slightly increase lower-frequencies.

      Technically the CLASSIC is an extremely advanced headphone amplifier and offers excellent value-for-money!



    • By wolfz
      Item: Schiit Modi 3
      Location: Goldcoast
      Price: $150 plus postage
      Item Condition: new
      Reason for selling: unwanted gift
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Purchased a few weeks ago from AtA.
      Proof of purchase and comes with original packaging and USB cable.
      Inputs: USB, Toslink SPDIF, Coaxial SPDIF
      Sample Rates and Bit Depths: 16/44.1 to 24/192 via USB, Coax, and Optical
      Input Receiver: 
      USB: C-Media CM6631A
      SPDIF: AKM 4113
      D/A Conversion IC:
      Modi 3: AKM AK4490
      Analog Summing, Active Filtering: 
      Modi 3: Based on OPA1662 with precision thin-film resistors, DC coupled
      Output: RCA (single-ended)
      Output Impedance: 75 ohms
      Frequency Response: 20Hz-20KHz, +/-0.25dB
      Maximum Output: 2.0V RMS 


    • By law18
      Item: HiFiMan HE-1000 Headphones 
      Location: Townsville, QLD, Australia
      Price: $1800 (+ Freight)
      Item Condition: Used
      Reason for selling: Deceased Estate (My father)
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      These headphones are in excellent condition, I am selling them on behalf of my fathers deceased estate, they sound absolutely excellent. They will include the original box and all cables as photographed. I am happy to send them, just contact me for a quote. Anyone looking at these and considering them will know what they are so I will save the sales pitch. 


  • Create New...