Guest Blackbriar Posted April 3, 2021 Share Posted April 3, 2021 Has anyone installed Nagaoka MP-110 on Rega Planar 1 or planar 1 plus? If So, how did you adjust anti-skating and VTF? Many Thanks in Advance Link to comment Share on other sites More sharing options...
wartman Posted April 3, 2021 Share Posted April 3, 2021 (edited) https://youtu.be/bb8STonWhg4ttp This video will help answer your questions. It explains how to accurately set up anti-skate etc on the RP1 Hope it's helpful Edited April 3, 2021 by wartman more info Link to comment Share on other sites More sharing options...
Guest Blackbriar Posted April 3, 2021 Share Posted April 3, 2021 Thank you for the video link. I did follow the steps earlier and couldn’t get distortion free playback on track 9 of side 1 of test record. The magnet was set right at 27mm as he indicated in the video. Link to comment Share on other sites More sharing options...
wartman Posted April 3, 2021 Share Posted April 3, 2021 Looks like trial and error till it's right. Bit of a pain removing the tonearm every time. Have you set the cartridge with a protractor and the vtf with scales first? The Nagaoka is about 1.5 grams heavier than the carbon.. Link to comment Share on other sites More sharing options...
Guest Blackbriar Posted April 3, 2021 Share Posted April 3, 2021 Yes the cartridge was aligned using rega baerwald protractor and vtf was set to 1.75g. Link to comment Share on other sites More sharing options...
Recommended Posts