Jump to content

Recommended Posts

Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.,Shipping is included in price.
Suburb or Town: Hornsby
State: NSW
Payment Method: Paypal, EFT, Cash
Reason for selling: Upgraded to an Aquilar

Further information: 

 

Brinkmann 10.5 Tonearm

 

I've had this Tonearm for approx. 2-3 years.  It is excellent. Was a great and very notable upgrade on my Soulines Kubrick.  The main thing I noticed was the extra weight to the sound.  Presentation was massive, dug deep and wide.

 

I've had a lot of enjoyment from this Tonearm but with the recent upgrade to an Acoustical Sounds Aquilar Anniversary tonearm (circa $26k), I no longer need the Brinkmann, and the Transrotor doesn't allow for a 10inch arm. 

 

A great buy for anyone looking for a new arm.  RRP is $7800  (see link to Wyndham Audio for specs etc..)

 

It will be bullet proof boxed and shipped with Express Post with insurance

 

Brinkmann 10.5 Tonearm | Wyndham Audio

 

One and only price drop from $4500 to $4000


Photos:

 

PLEASE READ

  • If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved
  • If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item
  • If you don't include photographs of the actual item being sold, your ad will not be approved
  • You understand that a reasonable donation for selling fees is expected upon successful sale of your item

5.jpg

6.jpg

1b.jpg

april 2020 2.jpg

4.jpg

3.jpg

1.jpg

2.jpg

Edited by scuzzii
  • Like 9
Link to post
Share on other sites


Hi John @scuzzii, great arm. I cannot seem to find what mounting arm this fits, is it SME, Rega  or something else? Also is there a phono cable included (may be the item in the box pic but cannot quite see).

 

Cheers, Rod

Link to post
Share on other sites

Hi Rod,

 

I had it mounted on a Soulines base, you can get SME and Rega as well.  2nd mounting was Brinkmann Bardo.  I have the Soulines mount if that's the TT you have, but other than that, have the Bardo mount.

 

You would be able to order a arm base through Wyndham Audio. @cheekyboy

 

Phono cable isn't included when you buy the arm - i don't know if Brinkmann does cable to be honest, i have a couple of cables though.  The arm is wired with cart leads to the din plug at bottom of the arm.  Any standard Din to Rca / XLR phono cable would work.  I'm not sure if I've answered your question or not, happy to discuss in PM or by phone.

 

In Summary:

- can be mounted to most arm bases

- Arm is fully wired to a DIN connection, any standard Phono cable will plug into the Din connection at bottom of the arm.  I used a L-Shape  (right to left as my TT is on the right of my setup)

8.jpg

7.jpg

9.jpg

  • Like 2
Link to post
Share on other sites
9 hours ago, rodders3 said:

Hi John @scuzzii, great arm. I cannot seem to find what mounting arm this fits, is it SME, Rega  or something else? Also is there a phono cable included (may be the item in the box pic but cannot quite see).

 

Cheers, Rod

 

Hi Rod, I just picked up on John's @scuzzii post above and what he is saying is correct regarding the phono cable 5 pin DIN at the arm end and any termination you require at the other.

 

Regarding the mounting, can you tell me what turntable you have? Depending on the turntable you have, you may need to have that manufacturer produce an armboard to suit the P2S of the Brinkmann 10.5, which is 244 mm.

 

Cheers,

 

Keith

  • Like 2
Link to post
Share on other sites


Hi @scuzzii and @cheekyboy

 

I have a Techdas Airforce V. It can take 4 arms but only have one attached at moment.  I would need to buy an arm attachment and the one I like is made in Italy but is substantially cheaper than a techdas. It seems they make arms for tonearms as shown here:

http://www.audiogears.it/category.php~idx~~~222~~MICRO+SEIKI+TONEARM+BASES~.html

 

Phono cable is all cool - seems just any 5 pin DIN.

  • Like 1
Link to post
Share on other sites
45 minutes ago, rodders3 said:

Hi @scuzzii and @cheekyboy

 

I have a Techdas Airforce V. It can take 4 arms but only have one attached at moment.  I would need to buy an arm attachment and the one I like is made in Italy but is substantially cheaper than a techdas. It seems they make arms for tonearms as shown here:

http://www.audiogears.it/category.php~idx~~~222~~MICRO+SEIKI+TONEARM+BASES~.html

 

Phono cable is all cool - seems just any 5 pin DIN.


Hello Rod,

 

The Brinkmann 10.5 will go onto the Techdas no problem, you’ll just need an arm board from them or the Italian dealer to suit the Brinkmann arm.

 

Cheers,

 

Keith

  • Like 2
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By NADbooffa
      Item Condition: Used but in very good working order Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Vermont State: VIC Payment Method: EFT or PP(+3%) or Cash Reason for selling: Upgradeitis! Further information: 
      Made in England, Hadcock GH220 tone arm is for a quick sale
      Can be shipped interstate at agreed cost.
       
      Note* -Missing the finger lift on the head-shell
       
      Specifications:   This a 9 inch Tone-arm
      Overall length: 307.34mm
      Height: 43.18 to 88.9mm
      Effective length: 228.6mm
      Rear overhang: 71.12mm
      Overhang: 15.75mm
      Offset angle: 23 degrees
      Mounting distance: 212.85mm
      Cartridge weight: 3.5-10g
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item  
       
       


       





    • By Family Jules
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Lane Cove State: NSW Payment Method: Paypal, EFT, Cash on pickup Reason for selling: Upgraded Further information:
       
      This cartridge has had somewhere between 100 to 150 hours use and is in perfect condition. I can't remember the exact retail price when purchased new but from memory it was around $2500 give or take.
       
      I'm selling simply because I decided to upgrade to a different cartridge. This wasn't due to any outright criticism of the Pi itself but simply due to that never ending "itch" to always try and improve on what you've got! IMHO it's a fantastic all round cartridge - nicely balanced and superbly detailed.
       
      As you can see from the photos the cantilever is in perfect condition. Included are the stylus cleaning brush, standard fastening screws which come in two lengths and a pair of washers.
       
      Specs from Brinkmann website:
       
      Type Moving Coil Weight 14 g Stylus microridge, radius 3 µm Compliance 15 µm/mN Tracking force 1,8 g Vertical tracking angle 23° Output voltage 0,15 mV (velocity 1 cm/sec) Output impedance 20 Ohm Load (recommended) 600 Ohm Frequency response 0 Hz....30 kHz Frequency intermodulation 0,5 % Crosstalk 25 dB (1 kHz)
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.






    • By Family Jules
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Lane Cove State: NSW Payment Method: Paypal, EFT, Cash on pickup Reason for selling: Upgraded Further information:
       
      This cartridge has had somewhere between 100 to 150 hours use and is in perfect condition. I can't remember the exact retail price when purchased new but from memory it was around $2500 give or take.
       
      I'm selling simply because I decided to upgrade to a different cartridge. This wasn't due to any outright criticism of the Pi itself but simply due to that never ending "itch" to always try and improve on what you've got! IMHO it's a fantastic all round cartridge - nicely balanced and superbly detailed.
       
      As you can see from the photos the cantilever is in perfect condition. Included are the stylus cleaning brush, standard fastening screws which come in two lengths and a pair of washers.
       
      Specs from Brinkmann website:
       
      Type Moving Coil Weight 14 g Stylus microridge, radius 3 µm Compliance 15 µm/mN Tracking force 1,8 g Vertical tracking angle 23° Output voltage 0,15 mV (velocity 1 cm/sec) Output impedance 20 Ohm Load (recommended) 600 Ohm Frequency response 0 Hz....30 kHz Frequency intermodulation 0,5 % Crosstalk 25 dB (1 kHz)  
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item






    • By lordvader82
      Item Condition: Used - needs re-wire Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Reservoir State: VIC Payment Method: Paypal, PayId or Cash Reason for selling: No longer required A very long time ago I purchased a Rega Planar 3, which came with an original R200 tonearm. I upgraded to an RB300, and have only recently found the old R200.
      Some points:
      The wires are snapped at the base, so they will either need to be resoldered, or re-wired Can't talk to other functionality, as it hasn't been used for a while, and I don't know much about it.  
      But - it's a beautiful tonearm. Has the Rega headshell.
      Given the points above, selling the arm as is.
       
      Photos:
       

       

       

       

    • By Family Jules
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: Lane Cove State: New South Wales Payment Method: Paypal or EFT Reason for selling: Upgraded Further information:
       
      This cartridge has had approximately 150 hours use and is in perfect condition. I can't remember the exact retail price when purchased new but from memory it was around $2500 give or take.
       
      I'm selling simply because I decided to upgrade to an Acoustical Systems Archon cartridge. This wasn't due to any outright criticism of the Pi itself but simply due to that never ending "itch" to always try and improve on what you've got! IMHO it's a fantastic all round cartridge - nicely balanced and superbly detailed.
       
      As you can see from the photos the cantilever is in perfect condition and the cart was never dropped onto the record or 'abused' in any way. Included are the stylus cleaning brush, standard fastening screws which come in two lengths and a pair of washers.
       
      Specs from Brinkmann website:
       
      Type Moving Coil Weight 14 g Stylus microridge, radius 3 µm Compliance 15 µm/mN Tracking force 1,8 g Vertical tracking angle 23° Output voltage 0,15 mV (velocity 1 cm/sec) Output impedance 20 Ohm Load (recommended) 600 Ohm Frequency response 0 Hz....30 kHz Frequency intermodulation 0,5 % Crosstalk 25 dB (1 kHz) Body three-piece resonance optimised luminum body    
      Photos:
       
      PLEASE READ
      If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved









×
×
  • Create New...