snurb Posted December 9, 2020 Share Posted December 9, 2020 (edited) SOLD Item Condition: Great Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Fitzroy North State: VIC Payment Method: EFT to PayID, Cash on Pickup. Reason for selling: NLR Further information: Perfect visual and working condition, this will improve the quality of power going into any device. Comes with original box, powerbrick and AU power cable as pictured. --------------------------- Uptone Audio LPS-1 --------------------------- UltraCap™ LPS-1 The world's first bank-switching, microprocessor-controller, ultracapacitor-based, ultra-low-noise external linear power supply has arrived! In development for more than a year, and with 262 parts on the double-sided, 4-layer circuit board, this tour de force of engineering challenges traditional notions about what is important in power supply design. Use of the UltraCap™ LPS-1 in a quality music reproduction system will yield surprisingly audible improvements, and we invite comparisons to any other low voltage linear power supply. The LPS-1 is a single output, 1-amp linear power supply intended for powering a wide range of audio and computer devices. Examples include: UpTone's own USB REGEN, the Sonore MicroRendu, small DACs and headphone amps, USB>S/PDIF converters, specialty computer USB cards, SSDs, fibre media converters, PS Audio LANRover, SqueezeBox Touch, etc. A switch on the back of the LPS-1 allows for setting of the output voltage to 3.3V, 5V, or 7 volts. The input and output jacks of the LPS-1 are standard 5.5mm x 2.1mm size DC barrel connectors. The dimensions of the LPS-1 are: 110mm (4.33 inches) wide x 112mm (4.41 inches) deep x 30mm (1.18 inches) tall; Add 6.5mm (0.26 inches) for included rubber feet. Included with the LPS-1: A 70cm, 16awg, DC cable with 5.5mm x 2.1mm plugs at both ends (correct for a REGEN, MicroRendu, and many other popular devices that use that size). A Mean Well SMPS world-voltage-compatible tabletop SMPS for "energizing" the UltraCap™ LPS-1, along with a 45cm AC power cable (standard IEC plug one end, USA wall plug at the other—international buyers can cut and put a local plug on or just use any standard power cord). An LED at the back of the LPS-1 changes color (red/amber/green) based on the status of the supply. The programming of its 4096 logic-element FPGA controls and protects every aspect of its operation to assure safe and reliable performance. There has never been a power supply like this before! The UltraCap LPS-1 will elevate the performance of whatever component you power with it. [The adventurous could even purchase two units and hook their outputs up in series, perhaps with one set to 7V and the other to 5V to obtain 12V; An even more interesting application would be for a DIY hobbyist to use two units harnessed together and center-tapped to produce a pure and isolated bi-polar (+ & -) supply for audio circuit use.] Photos: PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved Edited December 9, 2020 by snurb 1 Link to comment Share on other sites More sharing options...
mloutfie Posted December 9, 2020 Share Posted December 9, 2020 (edited) . Edited December 9, 2020 by mloutfie Link to comment Share on other sites More sharing options...
Recommended Posts