Jump to content

Allo Digione Signature Player with 2 Allo Shanti Low Noise power supplies.


Recommended Posts

Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Yarraville
State: VIC
Payment Method: Paypal, EFT, Cash on Pickup
Reason for selling: Upgraded to new streamer

Further information:

 

Allo Digione Signature Player Raspberry Pi based streamer/music player 

This includes a RPi 3 B+, 16Gb micro SD card, 2 x Allo Shanti Ultra Low Noise Linear Power Supplies and Allo Digione S/PIDF transport. Can also supply SMPS it came with.

I had been using Volumio Virtuoso and its native tidal support and BubbleUPnP to stream to the Allo Digione Signature Player

 

The Digione signature RPi hat requires 2 5V power sources, one is supplied to the RPi (dirty) and the other is for the I2S conversion and S/PDIF reclocking on the Digione signature board. A standard 5V 3A adapter is included to power the RPi, the iFi iPower adaptor and battery pack are included to provide a cleaner power source to the Digione signature board. 

https://allo.com/sparky/digione-signature-player.html

https://www.allo.com/sparky/shanti.html

https://darko.audio/2018/11/a-short-film-about-the-allo-digione-signature/

 
Photos:

IMG_0595.thumb.jpg.b4f757a590a196018cd1bd581045b013.jpgIMG_0596.thumb.jpg.5f8623a7eeb3ab7336efc32d2fd08855.jpgIMG_0597.thumb.jpg.0d3c91845282b67c0ccbca14657ef476.jpgIMG_0598.thumb.jpg.de7db5da490ca49810633b27d6733463.jpgIMG_0599.thumb.jpg.072e9457882c7c26af0c59c0595f61c1.jpg

 

 

 

Edited by Andrew o_o
added in SMPS power supply
Link to post
Share on other sites

Great price. 
I just purchased an ifi power x and rpi4..... 

I would have snapped this up. 
Someone will get a nice deal. 
 

The power supply alone is close to this asking price. (shipping is a killer). GLWTS

Edited by Grizaudio
Link to post
Share on other sites


27 minutes ago, Andrew o_o said:

Thanks Grizaudio! You could always get this a backup ;) 

 

I found that sound quality was improved by using 2 separate Shantis to power clean and dirty side. This is the RPi 3B+ version

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

Link to post
Share on other sites

 

1 hour ago, Grizaudio said:

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

I’m running same Pi4 with Ian Canada boards and a allo shanti linear psu into a RME ADI 2 DAC 

love it 

what Platform do u use I use volumio ? 

  • Like 1
Link to post
Share on other sites
6 hours ago, Grizaudio said:

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

You should try the Ian Canada , Fifo reclocker/Isolator and a transport pi ,with multiple output options including I2S , rca ,bnc and optical , that way you can do away with all the added complexity and sound degradation of usb. This is what I use in my system and it outperforms any usb implementation I have tired.

Edited by Ozcall
Link to post
Share on other sites

Hi Andrew,

I just ordered a Digi one player last week directly from Allo. Would have jumped onto this. Bummer.


I would be keen on one of your Shanti power supplies if you are interested to split it up. Let me know  your thoughts.


Thanks

Link to post
Share on other sites


Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By christianb
      Item Condition: Good Shipping Options: Pickup available and you can audition.,Shipping is available at agreed cost. Suburb or Town: Palmyra State: WA Payment Method: Reason for selling: Space Further information:
      I bought the speakers just before the beginning of the plague last year from Old Bloke and shipped them to WA . 
      they might have been custom made for JB ( John Barbuto) by JBL in the late 70ies. The cabinets are walnut veneered and up to 60 mm thick which contributes to their immense weight of approximately 150 kg each. The built quality is way beyond any usual commercial product.
      the drivers are:
      2215 15” woofers
      2420 compression drivers
      2309 horns with 2327 adapter and 2310 lens and
      2405 slot tweeters.
      all drivers are alnico. 
      Dimensions are 58 cm deep, 73 cm wide and 118 cm high.
      Despite the physical appearance they play very civilised with loads of details and impressive room even in my way too small room with 20 quality valve watts. Especially at low volumes you will get a very satisfying complete sound. You can also crank them off course until the doctor comes but there is a limit for my room , it just gets a bit overload with bass at higher levels. 
      this and the size are the reasons why I’m looking for something else.
      They work well with valves but should also with good SS amps. The previous owner used Metaxas amplification. 
      Old Bloke gave them a nice Schellack treatment before they came to me so they are looking good if you like the look of big proper speakers. I kept the protective grill over the woofers for the occasional dancing kid in my music room but they would certainly look better without.
      I thought of getting an autoformer network for them from Werner Jagusch which should bring them even further but I decided for a smaller solution. 
       
      Photos: 

       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.











    • By drago007
      Item Condition: used-new Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: maribyrnong State: VIC Payment Method: EFT, Payid Reason for selling: NLR Further information:
       Mayflower arc MK1 for grabs. Bought it and haven't used it very much. It has the latest firmware.
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.




    • By xtiva2000
      Item Condition: Used in excellent codition Shipping Options: Pickup available but audition is not available. Suburb or Town: Baulkham Hills State: NSW Payment Method: EFT, Cash on Pickup, Paypal as Friend or 3% fee Reason for selling: NLR Further information:
       
      Well regarded Drop's Cavalli Liquid Carbon X Solid state amp for sale.
       
      Purchased from another SNA member about a month ago to listen during my headphone amp was at warranty service, hence no longer required.
       
       
      It has great musical sound signature.  Takes about 10~15 minutes to warm up to give out the best though.
       
      Comes with Power supply, without 2-prong to GPO cable, and Original Box.
       
      Pickup or can meet half way if required.  (no shipping for now)

      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.



    • By SML Gerard
      Item Condition: NEW / NEVER USED Shipping Options: Pickup available but audition is not available. Suburb or Town: Balwyn North State: VIC Payment Method: PAYPAL / CASH ON PICK UP Reason for selling: No use for these / No support equipment Further information:
       
      We are selling our KEF 203/2 Speakers which are brand new, never used but out of packaging. We do not have the support HiFi system to use these speakers or the room to home them. They are in A1 excellent condition as they have only just recently been removed from their packaging. They have never been used and have all labelling / connections in packaged housing. 
       
      In terms  of spec / information; please see below which i have found from published reviews;
       
      The highly rated KEF 203/2 speakers, in our opinion is the alternative to the other highly British speaker, the B&W 803D. Both models are equally good but where the KEF differs is its slightly smoother, more centric presentation in the highs and mids. And this is largely due to their latest designed UNI-Q driver. Combined with the speakers other twin 6.5″woofers, the 203/2 produced a seamless, smooth presentation across the frequency range. Bass extension was down to 50Hz with the highs peaking at a very high 60KHz. Nominal impedance is 8 ohms with a sensitivity of 89dB. While the bass on the B&W 803D may be a bit on the dry side, the KEF is more “organic” with a more natural round off at the bottom end. It may not be as tight but it has the same voluminous space that will easily fill the room. Soundstage and depth was impressively wide and deep which add a lot more emotion into the holographic presentation. Speakers are tri-wireable and the previous owner fully utilized this feature. If you want to use a regular set of speaker cables, you would need two jumpers on each speaker. One pair of jumpers if you plan to bi-wire.
      Cosmetically, the speakers looks really good. Some scuff marks and tiny nicks here and there and the usual polishing swirl marks common with a gloss black finish but nothing major. Manual, spikes and a pair of jumpers are included. We do not have the original boxes so local pickup is preferred. If shipping is required, it will ship via freight.
       
      https://kahlaudio.com/products/kef-reference-2032-floorstanding-speakers-absolute-sound-recommended-9000-msrp/
       
      Type: Three-way, floorstanding, bass-reflex dynamic loudspeaker
      Driver complement: Two 6.5” woofers, one Uni-Q concentric with 25mm tweeter
      Frequency response: 50Hz–60kHz
      Sensitivity: 89dB
      Nominal impedance: 8 ohms
      Recommended amplifier power: 50–200 watts
      Dimensions: 40.2” x 9.8”x 15.9”
      Weight: 58 lbs. (net each)
       
       



      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    • By RAF13
      Item Condition: BNIB - Never Used Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Perth State: WA Payment Method: Paypal (+ 3% or F&F), Bank Deposit, Cash on Pickup. Reason for selling: NLR Further information:
       
      FIBBR Ultra Pro HDMI 2.0 Cable 4K 60Hz 18Gbps - 1.5m BNIB


      Cable clear-out. I Purchased three of these cables from Geoff at HeyNow Hifi and this cable was never used.


      The FIBBR High-Band optical cable has advantages of being anti-bending, low in attenuation, thin, light, environmental-friendly, flame-retarding and etc.


      All its internal and external protective materials are environmental-friendly, halogen-free and RoHS/Reach compliant. While in burning, the materials generate almost zero corrosion, extremely low rate of toxicity, very little smoke and is not harmful to human body. Besides, it has remarkable performance in flame retarding, therefore satisfying the requirements of flame resistance in family wiring.


      What’s worth mentioning is that each FIBBR cable has to pass a test of a million times of dragging and dropping, and it can pass 500N of flattening pressure test.


      FULLY SUPPORTS 4K ULTRA HD DISPLAY


      Traditional cables are not stable enough when connected to 4K display, which can results in frame loss or jams. And since the speed is relatively low, the 4K display is also affected.


      FIBBR active optical fiber cable can display sophisticated images better, and its fast speed data transmission without delay can provide excellent audios and videos of blockbusters for users.It’s quite worthwhile for people loving watching HD blockbusters to installed FIBBR cable on their HD video devices.


      For the speciality of game applications, we are more supportive on the 4k@60Hz display, thus to provide more smooth game experience.


      THE ANTI-INTERFERENCE


      The basic element of optical fiber is quartz which can transmit light, but is neither electrical conductive nor affected by electromagnetic field. Therefore, optical fiber cables are more powerful in countering electromagnetic and industrial interference. When optical fiber cable is connected in game playing, players don’t need to worry that any other devices might interfere with the images so they can fully involved in the game, thus being an exceptionally useful help for game players.


      Audio information has extremely high demand for transmitter material. FIBBR optical cables have super low ground noise, which ensures the sound to be pure and brings superb audio visual enjoyment to users.


      THINNER, LIGHTER AND SOFTER


      The connecting wire volume and weight of FIBBR optical HDMI cables are 60% less than those of traditional copper wires.


      Being thinner, lighter and softer makes both application and wiring easier and more convenient. Fibber optical fiber cable is compatible with many HD devices, and users don’t need to worry about cable route planning and placement any more.


      SPECIFICATION AND PARAMETER


      Product Type: HDMI 4K@60Hz

      Specification: 4:4:4 4K@60Hz

      Product Length: 1.5~50M

      Cable Diameter: 4.6 mini meter

      Material: 4-core cable

      Product Model: Ultra Pro

      Bandwidth: 18Gbps

      Shell: black PC material

      Power Supply: no external power supply needed

      Sheath: PET single-silk weave


      http://www.fibbrtech.com/producthelp.php?id=66
       
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.



×
×
  • Create New...