Jump to content

Allo Digione Signature Player with 2 Allo Shanti Low Noise power supplies.


Recommended Posts

Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Yarraville
State: VIC
Payment Method: Paypal, EFT, Cash on Pickup
Reason for selling: Upgraded to new streamer

Further information:

 

Allo Digione Signature Player Raspberry Pi based streamer/music player 

This includes a RPi 3 B+, 16Gb micro SD card, 2 x Allo Shanti Ultra Low Noise Linear Power Supplies and Allo Digione S/PIDF transport. Can also supply SMPS it came with.

I had been using Volumio Virtuoso and its native tidal support and BubbleUPnP to stream to the Allo Digione Signature Player

 

The Digione signature RPi hat requires 2 5V power sources, one is supplied to the RPi (dirty) and the other is for the I2S conversion and S/PDIF reclocking on the Digione signature board. A standard 5V 3A adapter is included to power the RPi, the iFi iPower adaptor and battery pack are included to provide a cleaner power source to the Digione signature board. 

https://allo.com/sparky/digione-signature-player.html

https://www.allo.com/sparky/shanti.html

https://darko.audio/2018/11/a-short-film-about-the-allo-digione-signature/

 
Photos:

IMG_0595.thumb.jpg.b4f757a590a196018cd1bd581045b013.jpgIMG_0596.thumb.jpg.5f8623a7eeb3ab7336efc32d2fd08855.jpgIMG_0597.thumb.jpg.0d3c91845282b67c0ccbca14657ef476.jpgIMG_0598.thumb.jpg.de7db5da490ca49810633b27d6733463.jpgIMG_0599.thumb.jpg.072e9457882c7c26af0c59c0595f61c1.jpg

 

 

 

Edited by Andrew o_o
added in SMPS power supply
Link to post
Share on other sites

Great price. 
I just purchased an ifi power x and rpi4..... 

I would have snapped this up. 
Someone will get a nice deal. 
 

The power supply alone is close to this asking price. (shipping is a killer). GLWTS

Edited by Grizaudio
Link to post
Share on other sites


27 minutes ago, Andrew o_o said:

Thanks Grizaudio! You could always get this a backup ;) 

 

I found that sound quality was improved by using 2 separate Shantis to power clean and dirty side. This is the RPi 3B+ version

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

Link to post
Share on other sites

 

1 hour ago, Grizaudio said:

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

I’m running same Pi4 with Ian Canada boards and a allo shanti linear psu into a RME ADI 2 DAC 

love it 

what Platform do u use I use volumio ? 

  • Like 1
Link to post
Share on other sites
6 hours ago, Grizaudio said:

 

I'm a little spoilt and have an RME ADI 2 FS dac. 

I have my RPI4 connected via USB. 

 

The RME has a pretty decent USB implementation, and rejects noise and jitter. 

Sounds pretty amazing. Although I would be curious to test. ;) 

You should try the Ian Canada , Fifo reclocker/Isolator and a transport pi ,with multiple output options including I2S , rca ,bnc and optical , that way you can do away with all the added complexity and sound degradation of usb. This is what I use in my system and it outperforms any usb implementation I have tired.

Edited by Ozcall
Link to post
Share on other sites

Hi Andrew,

I just ordered a Digi one player last week directly from Allo. Would have jumped onto this. Bummer.


I would be keen on one of your Shanti power supplies if you are interested to split it up. Let me know  your thoughts.


Thanks

Link to post
Share on other sites


Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Stephen McNulty
      Item Condition: Sealed, presumed mint Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: North Balgowlah State: NSW Payment Method: PayPal, EFT Reason for selling: duplicate Further information:
      2017 remaster and repressed. 
      Double vinyl and poster. Includes download code for M.Gira solo effort Drainland (1995). 
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item

    • By VinylChef
      Item Condition: Excellent Shipping Options: Pickup available and you can audition. Suburb or Town: Edgecliff State: NSW Payment Method: PayPal, EFT, Cash on Pickup Reason for selling: Upgraditis PRICE DROP!
      Why Buy?
      Voted by What Hi-Fi? in 2018 as one of the best 19 stereo amplifiers in the magazine’s lifetime, the Audiolab 8000A is a classic British design that offers plenty of everything: power, transparency, dynamic range.
      I have been the only owner of this excellent unit since purchase in about 1997. Mid-last year I invested $440 in significant maintenance, repairs and upgrade, not just to achieve sonic excellence, but to ensure it will last for another 20 years. (Work was done by acclaimed technician, William Crampton at Factory Audio in Canberra – see statement of work for details of his work on this amp.)
      No significant marks or blemishes at all, but unfortunately one button (the ‘Speakers’ button, which I have never needed to use) was lost many years ago.
       
      Specifications
      Power output: 60 watts per channel into 8 ohms (stereo) (but mine hit 64W – see Williams note on the statement of work) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 0.11mV (MC), 2mV (MM), 100mV (line) Signal to noise ratio: 75dB (MC), 78dB (MM), 80dB (line) Channel separation: 60dB (line) Output: 100mV (line), 0.7V (Pre out) Speaker load impedance: 4 ohms to 16 ohms Dimensions: 445 x 74 x 335mm Weight: 7.6kg
        Photos









    • By VinylChef
      Item Condition: Excellent Shipping Options: Pickup available and you can audition. Suburb or Town: Edgecliff State: NSW Payment Method: PayPal, EFT, Cash on Pickup Reason for selling: Upgraditis PRICE DROP!
      Why Buy?
      Built in 1999, with one main owner since then, this is a great example of a fantastically capable Rotel power amplifier.
      Featuring an inhouse-built, oversized toroidal transformer and easily configured for bridged mono mode, it has plenty of power for any speaker down to 4 ohms, and a lovely warm detailed sound to boot.
      Recently serviced and given a clean bill of health by Rage Audio (with only minor repairs needed), it is immaculate mechanically and electronically, with the only blemish being pitting and roughness on the top cover.
       
      Specifications
      Power output: 130 watts per channel into 8ohms (stereo), 360W into 8ohms (mono)
      Frequency response: 10Hz to 100kH
      Total harmonic distortion: 0.03%
      Damping factor: 500
      Input sensitivity: 1V
      Signal to noise ratio: 120dB
      Speaker load impedance: 4ohms (minimum)
      Dimensions: 440 x 121 x 327mm
      Weight: 10.3kg
       
      Photos










    • By cccrchairman
      Item Condition: Very good Shipping Options: Pickup available but audition is not available. Suburb or Town: Como State: NSW Payment Method: Paypal, EFT, Cash on Pickup etc Reason for selling: NLR Further information:
      Cabinet is in good shape. 1115x510x430mm. 
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item


    • By syd
      Item Condition: Excellent. 8 Months Old. Lightly used Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Melbourne State: VIC Payment Method: Paypal +3%, EFT, Cash on Pickup Reason for selling: Bought for lockdown entertainment. No longer required! Further information:
      3 sets of cables I bought to play with my IEMs during lockdown.
      Suitable for IEMs with MMCX connectors. The other end is a balanced 4.4mm plug. Suits something like the Woo Audio WA11. Or use an adapter plug for other terminations.
       
      Each has their own audible personality. Grab them at a bargain price to find out which you prefer.
      They take ages to arrive from China, luckily these are available now.
       
      Details:
      AK Kinboofi 4 Core Pure Copper Silver Plated Gold Mix Cable 4.4mm plug with MMCX
      RRP $93 https://www.aliexpress.com/item/32968749034.html
       
      NICEHCK 8 Core 6N GC-OCC Single Crystal Copper Cable 4.4mm plug with MMCX
      RRP $65 https://www.aliexpress.com/item/4000625288474.html

      NICEHCK 16 Core High Purity Copper Cable 4.4mm plug with MMCX 
      RRP $18 https://www.aliexpress.com/item/32954926911.html

      Photo:




×
×
  • Create New...