Jump to content

FS: BOSCH Venset TS750 Remote Motorised Television Screen Lift (peak 100kg load 85" TV) $ NEG


Recommended Posts

Item Condition: Manufacturer refurbished
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Lane Cove
State: NSW
Payment Method: PayPal EFT Cash
Reason for selling: Not needed

Further information: 

 

Started as a project

 

You can hide your TV by dropping it down into a cabinet and then lowering your projector screen, or raising the TV in front of a wall mounted projector screen. Best of both worlds.

 

Was holding a 65" OLED easily. Will do 85" easily - up to 100kgs

 

New cables and Powerbrick.

 

New energy chain (protects the cable)

 

Cover removed from gears to show metal not plastic.

 

https://www.venset.com/Text/default.aspx?m=text&a=all&id=4

 

https://www.amber.co.nz/files/1614/7804/2545/venset-int.pdf

 

https://www.avinstalls.co.uk/venset-ts750a-motorised-television-screen-lift-p-217.html

Vesnet TS750 Motorised TV Lift Mechanism
Designed for medium to large LCD, LED and Plasma TV screens up to 52" the TS750 offers a near silent operation and is an ideal unit for flat screen TV's with a slightly larger Vesa mounting pattern. The TS750 requires a total build-in height of 865mm. The lift is complete with an RF remote control unit as well as a manual rocker switch and can support an impressive 100kg peak load. The unit also features motor dead stops so the lift can be programmed to the required lift up to 750mm and also has a safety feature which will stop the lift in case of human contact with leading components.
The TS 750 Motorised TV Lift can be used to raise a flat screen TV from custom furniture or lower a flat screen TV from the ceiling. It comes as standard in raise mode but full instructions are included to configure the unit to lower, making the lift very useful for ceiling TV Lift installations

 

maximum screen size up to 52" (will easily go much bigger when mounted correctly)
build in height(excluding lifter) 865mm
total lifting stroke 750mm
toatl lift range 715mm to 1465mm
lifting capacity 5kg to 65kg (100kg MAX)
depth of lift 110mm
lid lifter setting 46mm to 286mm
input power 100v to 240v ac
vesa mountins 600x400, 600x200, 600x100, 400x400, 400x200, 400x100,300x300, 200x200, 200x100
TV mounting brackets Y horizontal & vertical
manual switch Y
RF remote Y
lid lifter Y
adjustable stroke Y
reversible operation Y
anti squeeze safety Y
   
IR remote included

 
Photos:

 

PLEASE READ

  • If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item
  • If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved
  • If you don't include photographs of the actual item being sold, your ad will not be approved

125991900_10157576249201466_4516604997778688704_o.jpg

126393436_10157576249086466_9155484754693989859_o.jpg

126393374_10157576249011466_4254397891013015996_o.jpg

126049657_10157576248956466_7482684127270289932_o.jpg

126159906_10157576248866466_3814104379566776424_o.jpg

venset-ts750-technical-picture.jpg

126198537_10157576382101466_9165796168710112061_o.jpg

Edited by super kermit
Link to post
Share on other sites

I also have the solid marine structural ply frame to mount the TS750 to. That way you DO NOT NEED to wall mount it as it is on a movable floor stand.

 

SOLID and heavy - will sell at materials cost.

Link to post
Share on other sites
  • super kermit changed the title to FS: BOSCH Venset TS750 Remote Motorised Television Screen Lift (peak 100kg load 85" TV) $ NEG
  • 2 weeks later...
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By patjoy
      Item Condition: Excellent! Shipping Options: Pickup available but audition is not available. Suburb or Town: Melbourne (Northern Suburbs) State: VIC Payment Method: Bank transfer/Cash Reason for selling: NLR Further information:
       
      For sale is my VPI Scout turntable with JMW9 tonearm, Dynavector 20x (VPI) MC cart and made to order acrylic cover.
       
      A great table that has plenty of positive reviews that highlights its price/performance ratio very much in favour of the consumer. The Dynavector 20x cart was custom made for VPI with 1mV output. It combines the speed of low output and richness and low noise of high output. It has been sparingly used by me so plenty of hours still left. The acrylic cover was made to order and still in great condition. Comes with the JMW memorial tonearm alignment jig and spare cart screws/screwdriver.
       
      All in all a great table setup! I am a fastidious person (read anal) with my audio equipment, so rest assured everything is in excellent condition.
       
      I still have the box but l am reluctant to ship at this stage as l think l will struggle on how to pack it all up safely. So local sale is preferred.
       

       

       

       

       

       

       

       

       

       
    • By Maggie
      Item Condition: Ex- Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Vermont State: VIC Payment Method: Paypal, EFT, Cash on Pickup Reason for selling: Clearance Further information:
       
      Photos:

      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    • By Bill_F
      Item Condition: Mint Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: CARNEGIE State: VIC Payment Method: Paypal (+2.6%), EFT, Cash on Pickup Reason for selling: Not using Further information:  
       
      Bought this 25 December 2020 from HiFiGo and used it for about an hour. It reportedly powers everything from sensitive IEMs to full-size cans (though I cannot vouch personally for that as I have drastically thinned my headphone herd).
       
      Sounds fantastic, but I decided to either: 1) quit stacking, or 2) stick with my FiiO E12A because I prefer its ergonomics and bass boost with my Etymotic ER4XR IEMs.
       
      I paid the full RRP of $229 USD for this unit and will provide bill of sale.  
       
      This presents in mint condition, with zero signs of use. 
       
      Specs:
       
      Typical line output indicators Frequency response (from 10 Hz to 20 kHz): ±0.02dB THD + n: 0.00015% @300Ω SNR: 124dB @300Ω Crosstalk: <110dB @300Ω Max output: 6.443Vrms 18.4dBu(10Hz to 20kHz) Headphone output power: @300Ω 84mW , @600Ω 42mW ,@32Ω 74mW Class-A: 25mW/16R 50mW/32R Size: 125×65×18(mm) Weight:230g Output impedance: c.1ohm  
      Photos:
       
      Goat for scale! 
       

       
      In action! Love the green:
       

       
       
      The back is covered in a pleather-type substance for protection whilst stacking or placing on a surface:
       

       
       
      The top has a 3.5mm SE input and output, as well as a smooth volume pot with heaps of travel and the perfect amount of resistance for portable use: 
       

       
      The left side has a power switch, two-position gain switch, and a current switch. These let you drive everything from sensitive multi-BA IEMs to power-hungry cans: 
       

       
      The right side has a button to press to indicate battery level:
       

       
      The bottom has a micro USB power input:
       

       
      Comes with all original packaging material, documentation, and accessories. Accessories are limited to a 3.5-3.5 cable and a USB A to USB micro cable for charging (not shown here):

       
       
    • By greggy
      Item Condition: excellent - never used Shipping Options: Shipping is available at agreed cost. Suburb or Town: Mount Eliza State: VIC Payment Method: paypal, cash on pick-up, eft Reason for selling: no longer required Further information:
       Bought for dac purchase that never got off the ground
      22 cm length still in original packaging 
      Photos:

      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item

    • By silversurfer
      Item Condition: very good Shipping Options: Shipping is available at agreed cost. Suburb or Town: Dunedin State: NZ Payment Method: Paypal Reason for selling: too many headphones Further information:Selling my Meze Empyrean which I had for 4 weeks now. Bought it off a friend who ordered it directly from Meze/ Romania in 06/20.
      Arrived in NZ in 09/20 due to Covid19 etc.
      Also bought a ZMF Verite C two weeks ago and admittedly prefer the latter.
      Also have a Kennerton Thridi, Abyss Diana V1 and Heddphone listed on TradeMe New Zealand...in case someone is interested.
      Selling most of my gear to finance a Susvara or Raal...haven’t made up my mind yet.
      Minimal feedback here but check silversurfer616 on HeadFi.
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item






×
×
  • Create New...