Jump to content

PS: Michi M8 Power Monoblock Amplifiers


Recommended Posts

Item Condition: Mint
Shipping Options: Pickup available and you can audition.,Shipping is available at agreed cost.
Suburb or Town: Ivanhoe
State: VIC
Payment Method: Paypal, EFT
Reason for selling: Different direction

Further information:

 

Limited time price reduction.

 

Selling a pair of Michi M8 mono-block power amps, each with remote control (you really only use the remotes for initial setup).
 

They are about 9 months old, and are in mint condition, and I am the first and sole owner, purchased new locally from CAV in Melbourne.

 

Each mono block provides over 1080w into 8ohm and 1800w into 4ohm.


I’ve been using the Michi’s to drive PMC MB2se speakers which they manage very very well - at no time is there any sign of strain, compression etc.


The specs are available at the Rotel site here https://www.rotel.com.au/collections/michi

 

I have the original boxes, so shipping is possible but please not they are rather heavy (see the specs). It takes two people to lift one of the M8 power amps. 
 

These amps are wonderful, and I’m confident that the buyer will be very pleased with their performance on any loudspeaker!


Photos:

 

Just what you want from a pair of powerful mono blocks - heard not seen. They look boring, but sound amazing :)

 

IMG_1982.thumb.png.3cfa3d2a38d789a45d54779a5a6d5e19.png

IMG_1981.thumb.png.96e91313f252c4c3ccffdc57c020ed33.png

IMG_1983.thumb.png.3f6272d910ea37883ce86d30da254090.png

IMG_1984.thumb.png.9679861c63b9fdb0494836b51a7db8da.png

 

Edited by aris
  • Like 5
  • Love 1
Link to post
Share on other sites
16 minutes ago, Bluenote122 said:

Yep it’s way too cheap. 
 

This is crazy value. I’ve heard these amps they are bloody brilliant and a steal at this price

  • Like 1
Link to post
Share on other sites


There’s not a scratch on them, and I have the accessory boxes for that unboxing experience. They sit where they were placed by the kind folks of CAV and haven’t moved. 
 

I’ve gone over to the dark side (valves) otherwise these amps would have been keepers for life. 
 

Aris

  • Like 1
Link to post
Share on other sites


2 hours ago, aris said:

There’s not a scratch on them, and I have the accessory boxes for that unboxing experience. They sit where they were placed by the kind folks of CAV and haven’t moved. 
 

I’ve gone over to the dark side (valves) otherwise these amps would have been keepers for life. 
 

Aris

What tube amps did you buy?

Link to post
Share on other sites
49 minutes ago, Bluenote122 said:

What tube amps did you buy?


I am also selling the PMC MB2se’s? which the Michi’s were running. 
 

I now have Octave amps with high efficiency speakers. 

Link to post
Share on other sites


12 hours ago, aris said:


I am also selling the PMC MB2se’s? which the Michi’s were running. 
 

I now have Octave amps with high efficiency speakers. 

Interested to know the identity of the new speakers?

Link to post
Share on other sites
28 minutes ago, audiome said:

price is for one block. It is always very misleading of how dealers advertise prices for mono blocks. 

 Yeah, I have monoblocks and they where priced as a pair, think they all should be priced per pair. We don’t price speakers per unit!

  • Like 2
Link to post
Share on other sites
On 12/11/2020 at 3:05 PM, aris said:

... but work well with valves and I wanted to build a speaker :)

 

Thus says a truly "Sad Bastard"!  xD

 

Andy

 

  • Like 2
Link to post
Share on other sites


I’ve now sold the PMC’s so the (pair of) Michi’s are sitting all quiet in the corner with no speaker friends to play with. 
 

They would love to find a hard to drive speaker to show off what they can do!

Edited by aris
  • Like 1
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Alphason
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Belgrave State: VIC Payment Method: Paypal to Friends, EFT, Cash on Pickup Reason for selling: Decluttering Further information:
       
      I have always wanted to try this cable.
       
      It didn’t work for me because I wanted it for my turntable to phono-stage and its noise rejection in my environment was not adequate.

      Fitted with Kimber Ultraplate™ RCA type connector.
       
      Donation to SNA on sale.
       
       
      Photos:
       
       


    • By Gabehcuod
      Item Condition: 8/10 - Connectors show obvious age, rest is mint. Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: Vaucluse, 2030 State: NSW Payment Method: Paypal Friends & Family, Cash Reason for selling: Too many cables Further information:
       This is a 1.5M Accuphase RCA interconnect cable. Honestly accuphase are the best sounding cables I have heard.
      Crazy detail, sparling top end, deep and tight bass.

      These cables are from the Kensonic/Accuphase era and aren't easy to find these days.
      Market value for the 1.5M version floats around $180 AUD. After shipping costs during COVID, taxes and the free Aus-wide delivery I'm offering, this is priced a lot less than what I paid.
      Connectors show some signs of age but a NOS pair of these in the 1M version is currently available for $410.
       
      Photos:



    • By Alphason
      Item Condition: New Shipping Options: Pickup available but audition is not available. Suburb or Town: Belgrave State: VIC Payment Method: Paypal to Friends, EFT, Cash on Pickup Reason for selling: Decluttering Further information:
       
      I can’t recall having ever used these.
       
      These are the 3-6kgs per foot model. Different springs can be purchased for use on lighter equipment.
       
      Donation to SNA on sale.
       
      Photos:
       
       



    • By Alphason
      Item Condition: Okay Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Belgrave State: VIC Payment Method: Paypal to Friends, EFT, Cash on Pickup Reason for selling: Decluttering Further information:
       
      I purchased some secondhand Contour speakers a few years ago and the bases were a bit knocked around, so I purchased new ones from Denmark.

      This is one of the old bases, I discarded the other one but I kept the base inserts with the spikes.

      If you have some Contour S3.4’s with bases that need refurbishing you could swap them out one at a time and not lose the use of your audio.

      Alternatively, if you wanted to make bases or outriggers for any brand of speaker, these inserts and spikes would be an ideal and cheap way to start.

      If the wooden base isn’t needed and you want to just the inserts and spikes, I would be happy to remove them and ship just the eight inserts and spikes.

      The inserts and spikes look to be the same as fitted on the Dynaudio Confidence speakers that I have now.
       
      Donation to SNA on sale.
       
       
      Photos:
       
       






    • By Plasmod3
      Item Condition: Excellent condition Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Sunshine State: VIC Payment Method: Cash into account Reason for selling: Excess to requirements Further information: The amazing Stillpoint Ultra 6 isolation footer - set of 4 and comes with base as well. I have all the boxes for this too. Price is for a complete set of 4
       
      Mor information here https://www.stillpoints.us/index.php/product/ultra/121-ultra-6#!Ultra_6_Ultra_Base
       
      RRP is 1415 per footer so a huge discount here for whoever is interested in these.
       
      https://krispyaudio.com.au/products/stillpoints-ultra-6-isolation-footers.html
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
      - if you have previously sold items and not made a donation, your advertisement may not be approved.



×
×
  • Create New...