Jump to content

SOLD: FS: Exposure 2010S2 Integrated Amplifier


Recommended Posts

SOLD
Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: VIC 3030
State: Victoria
Payment Method: Cash, EFT
Reason for selling: The longest lockdown in VIC

Further information:

 

Condition is excellent without any noticeable dent or scratch. Superb sounding amp.

 

Comes with complete original packaging with remote and manual.

 

Shipping is possible at buyer's cost and will be packed well for safe delivery.

 

Hope it goes to a good home and continue be loved.

 

[PRODUCT DESCRIPTION]
 
Exposure 2010 S2 is completely redesigned its most popular line of 2010 with improved sound characteristics have the S2 index.


Input selector with less distortions and output cascades were improved in 2010S2 amplifier (they are now powerful Sanken transistors). In the power supply unit there are toroidal transformer and woofer capacitors with high volume. The appearance of a new device stayed almost the same so it will easily fit into the system with the components of previous years. Like its predecessor 2010S2 has no controls of timbre and, in fact, always works in Source Direct mode.

On the pack panel there are six audio inputs and the pre-amp output to extend the architecture. The model is equipped with the remote control, which can control other devices of Exposure.

The amplifier's sound is open, light, with a slight accent in top frequencies. The top itself is crisp and clear - micro-dynamics is perfect. However, it turned out that the amp is not too fond of music recordings with a dense spectrum. At the work with such phonograms the overall resolution slightly falls and the separation of instruments reduces too. You should experiment with network cables and filters. Dynamics of playing is moderate, but sufficient for the most of the genres. Lower bass is slightly weakened, so there is a slight lack of depth and scale in organ works.

 

However, sound resolution of Exposure 2010S2 amp in the whole range (especially in MIDs) turned out to be incredibly high. And in general, having such price, its middle range can be considered to be just exemplary. Timbres of instruments are played amazingly naturally and female vocal truly charms.
 
[REVIEWS on Previous Model]

[SPECIFICATION]
Description: Solid-state integrated amplifier with 6 line inputs.
Maximum output power: 75Wpc into 8 ohms (18.75dBW).
Frequency response: 20Hz–20kHz, ±0.5dB.
Input impedance: >14k ohms.
Input sensitivity: 250mV.
Signal/noise ratio: >100dB,
A-weighted (no reference level given).
Channel separation: >60dB, 20Hz–20kHz.
Total harmonic distortion: <0.05% at 1kHz, rated power.
Dimensions: 17.4" (445mm) W by 4" (100mm) H by 12" (310mm) D.
Weight: 15.4 lbs (7kg).

 


Photos:

 

PLEASE READ

  • If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item
  • If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved
  • If you don't include photographs of the actual item being sold, your ad will not be approved

7.JPG

5.JPG

6.JPG

4.JPG

2.JPG

3.JPG

1.JPG

8.JPG

9.JPG

Edited by Spider27
  • Like 1
Link to comment
Share on other sites





Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...
To Top