Jump to content

FS: **EOI** Emotiva XPA-5 Gen2 Amp - Brisbane


Recommended Posts

Item Condition: Near new - including box
Shipping Options: Pickup available and you can audition.,Shipping is available at agreed cost.
Suburb or Town: Springwood
State: Queensland
Payment Method: EFT, Cash on Pickup
Reason for selling: Funds for alternate approach

Further information:      ** Expression of Interest **  -- Considering to sell 1 x Emotiva XPA-5 Gen 2  5-channel Amp in addition to an Anthem M1 amp also listed currently.  Considering to sell to fund a full QSC Amp stack. 

It works great, not scratched, damaged or any other issues. Note I would only be considering selling this if the Anthem M1 amp also has interest. This is EOI.

If anyone has QSC DCA 1622 or 3022 amps feel free to reach out to trade.

 

 

These are well known as a cost effective way for quite decent power;  200W / channel @ 8-ohms, with all channels driven.    

It's a notable step forward from literally any built-in receiver amp stage due to dedicated paths and massive power supply, in addition to lower noise floor and lower THD. 

 

They have XLR or RCA - per channel selectable as well - plus 12V trigger.

 

Take note of the weight if considering shipping as they're 32KG.

 

XPA-5 Specifications:

Number of channels: 5

Topology: fully discrete, highly optimized dual differential, high current, short signal path Class A/B with premium components throughout

Power output (all channels driven):

  • 300 watts RMS @ 4 ohm (0.1% THD)
  • 200 watts RMS @ 8 ohm (0.05% THD)

Rated power bandwidth: 20 Hz to 20 kHz +/- .075 dB

Broadband Frequency response: 5 Hz to 100 kHz, +0 -2dB

Amplifier gain: 29 dB

Signal to Noise Ratio:

  • 1 watt: > 95 dB
  • Full power: > 119 dB

Input impedance:

  • unbalanced: 23.5 kohms
  • balanced: 33 kohms

Power supply: 1,200VA toroidal transformer with 60,000uF storage capacitance

Dimensions:

  • unboxed: 17” wide x 7 3/4” high x 19” deep
  • boxed: 23 1/2" wide x 12" high x 24 3/4" deep

Weight: 70.4 lbs (81.5 lbs boxed)

 

 
Photos:         Please see photos below: note only the GEN 2 is for sale in this listing. (top amp)

received_3232870223501733.thumb.jpeg.94dd5a6e2c8830d03239917ac8c645ba.jpeg

 

received_3477373302353990.thumb.jpeg.ccf67c672efe5ac6ad2d08bb9cb9afce.jpeg

 

 

received_697942244470898.thumb.jpeg.72978d035c08aebf10f949b6458eb16f.jpeg

received_628897894657611.jpeg

Edited by Neilsy
Adding Pictures.
Link to post
Share on other sites
  • Administrators

Hi Matt. As per the guidelines, you need to include photos of the actual item. Please re-list this item when you are able to provide photos. Thanks :) 

Link to post
Share on other sites
On 09/10/2020 at 12:09 PM, mrf0ster said:

Hey Matt, is this still covered by the transferable warranty?

 

Cheers Mark 

Hi Mark!

 

It would be but this has passed unfortunately. It doesn't hold any issues with any of my use. When I can I'll be able to go back to site and get photos to upload, per moderator's notes.

  • Like 1
Link to post
Share on other sites


Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Jamie Winston
      Item Condition: Used Shipping Options: Pickup available and you can audition. Suburb or Town: Wellard State: WA Payment Method: Reason for selling: Surplus to needs Up for sale is 2 x B&W 8 Inch Subwoofer Drivers taken from a PV1D subwoofer. (selling as a lot - both drivers together)

      The PV1D is still considered one of the best musical subs ever made. These drivers were removed due to an amplifier problem but are in great condition. Would be great for a subwoofer project or as replacement drivers for an existing PV1D.

      Auditioning is welcome but you will need to bring your own gear.
       
       
      I still have the PV1D enclosure with all the nuts/bolts etc (minus the internal amplifier) that can be included in the sale. Could make it into a passive enclosure quite easily if desired or source another amplifier to install.
       
      Pick-up only (Wellard WA location)
       

       

    • By Bill_F
      Item Condition: New, sealed Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: CARNEGIE State: VIC Payment Method: Paypal (+2.6%), EFT, Cash on Pickup Reason for selling: Not using Further information: Mistakenly bought these in March 2020 (I needed laptop RAM, not desktop), forgot to return them, and they have been sitting in my closet unopened ever since. My loss is your gain!
       
      Photos:
       

       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    • By RAF13
      Item Condition: 9/10 Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Perth State: WA Payment Method: Paypal (+ 3% or F&F), Bank Deposit, Cash on Pickup. Reason for selling: NLR Further information:
      Osborn Datalink Speaker Cable

      Single wire 3.5m pair


      Cable clear-out. These were used for a month or two before changing amps and having to go to spade connections.

      Osborn Datalink is the result of nearly 10 years of listening to cables. It is an extreme bandwidth, ultra high speed data transfer cable which has been very carefully selected and configured for unmatched neutrality, soundstage and dynamic range. I have found competing audio cables to match its sonic characteristics, but not under 10 times the Datalink's price. In nearly 4 years of making this exact cable, we have yet to have one returned. We are completely confident in offering the guarantee listed below.

      The cable comes with two banana plugs at the amplifier end, and two banana plugs at the speaker ends.
       
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item

    • By barbz127
      Item Condition: NOS Shipping Options: Shipping is included in price. Suburb or Town: Pullenvale State: QLD Payment Method: EFT/Paypal Reason for selling: NLR Further information:
      Purchased recently for a project that isn't going ahead.
       
      $25 covers $10 post and $15 SNA Donation - nothing to my pocket
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item
    • By gillmaverick
      Item Condition: Unused Shipping Options: Pickup available and you can audition. Suburb or Town: Korumburra State: VIC Payment Method: Cash on pick , Bank Transfer Reason for selling: No Longer Required Further information:
       I made this rack  during Victoria Covid Lock down. Total Cost to me for all materials was  close to $ 230  (  Acacia Slab , 4 X M16 steel rods , Chrome Tubing , Castors , Washers and Nuts etc  from Bunnings )  This rack was assembled 4 weeks ago and has not been used at all. Only  selling as A good Mate of mine built me another one  which I am keeping ( Which you can see in the background in one of the photos below ). As this was my first attempt I would not call this a state of the art rack . Its a bit rough around the edges but still looks nice. Asking price is less than the cost of materials. Refer photos for condition. Pick up only. I can deliver to South East Melbourne on one of my days off. Any questions please let me know.
      Rack Dimensions are as per below :-
      Each Panel Width =  650 mm 
      Each Panel Depth =  435 mm
      Height between panels = 235 mm
      Total Height of the Rack =  920 mm
       
      Photos:
       
      PLEASE READ
      If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item





×
×
  • Create New...