Jump to content

SOLD: FS: Bryston BDA-1 DAC


Recommended Posts

SOLD
Item Condition: Great - one scratch on top as per photos
Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.
Suburb or Town: Uraidla
State: South Australia
Payment Method: Paypal, Direct Deposit, EFTPOS
Reason for selling: Traded in

Further information: Bryston BDA-1 DAC

 

Specifications:

Digital inputs: USB 1.1, four S/PDIF electrical (RCA, BNC); two S/PDIF optical (TosLink), AES/EBU (XLR).

Digital input sample rates accepted: 32, 44.1, 48, 88.2, 96, 176.4, and 192kHz (transformer-coupled S/PDIF, AES/EBU); 32–48kHz, USB. Input word lengths accepted: 16–24-bit, S/PDIF and AES/EBU; 16-bit, USB.

Digital output: S/PDIF bypass loop output via RCA jacks.

Control inputs: RS-232 port via 9-pin subminiature connector; remote 12V power-on/off trigger.

Analog outputs: 1 pair each RCA, balanced XLR. Maximum output level: 2.3V RMS unbalanced, 4.6V balanced.

Output impedance: 100 ohms balanced, 50 ohms unbalanced.

Frequency response: 20Hz–20kHz, ±0.1dB. THD+noise at 1kHz: 0.002%. IMD (CCIF): 0.0003%, 19+20kHz.

Channel separation: 109dB at 1kHz. Output noise: <4ÊV or –100dB, 20Hz–20kHz (ref. 1V).

Signal/noise: 140dB. Dynamic range at –60dBFS: 123dB. Jitter: <250ps peak–peak.

Power consumption: 10VA.
Dimensions: 17" (432mm) or 19" (483mm)
 

 

IMG_2592.JPG

IMG_2593.JPG

IMG_2594.JPG

IMG_2595.JPG

IMG_2596.JPG

IMG_2597.JPG

IMG_2598.JPG

IMG_2599.jpg

Link to comment
Share on other sites



Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.




×
×
  • Create New...
To Top