Valman-13 Posted June 26, 2020 Share Posted June 26, 2020 SOLD Item Condition: AS NEW Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: NERANG State: Queensland Payment Method: Paypal, EFT Cash on pickup Reason for selling: Room too small Further information: Absolutely flawless and ‘as new’ pair of Tannoy XT8F And now out of production. Very regretful Sale, just not acceptable for my partner in our unit due to its size, so going back to my bookshelf speakers. Just purchased 2 months ago. (original Proof of purchase included) Only removed from packaging and then placed back into packaging exactly as it came from the factory. “Few rivals can match the power and finesse offered by these excellent speakers....” What Hi-Fi https://www.whathifi.com/au/tannoy/revolution-xt8f/review Ready to freight in required (ask for a quote) SPECIFICATIONS Finish is Medium Oak Recommended Amplifier Power (Watts RMS) 25 – 200 Continuous Power Handling (Watts Peak RMS) 100 Peak Power Handling (Watts) 400 Sensitivity (2.83 Volts @ 1m) 91 dB Nominal Impedance (Ohms) 8 Frequency Response (-6dB) 34 Hz – 32 kHz DRIVE UNIT Dual Concentric™ High Frequency 25 mm (1”) Linear PEI dome with Torus Ogive WaveGuide and Omnimagnet technology Dual Concentric™ Low Frequency 200 mm (8”) multi-fibre paper 44 mm (1.75”) voice coil Bass Driver 200 mm (8”) multi-fibre paper pulp cone with rubber surround. 44 mm (1.75”) edge wound voice coil CROSSOVER Crossover Frequency 250 Hz & 1.8 kHz Crossover Type Passive low loss 2nd order low pass, 1st order high pass CONSTRUCTION Enclosure Type Downwards ported twin cavity coupled reflex Volume 48.8 l (1.72 cu. ft.) Dimensions H x W x D (incl. plinth) 1080 x 317 x 345 mm (42.5 x 12.5 x 13.6”) Weight 19.9 kg (43.9 lbs) Photos: PLEASE READ If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved Link to comment Share on other sites More sharing options...
theok Posted June 26, 2020 Share Posted June 26, 2020 (edited) I have a pair of definition towers, made of stunning birch plywood and around 8 years old, I have yet to hear anything better to want to replace them, regardless of price. I reckon you would have to spend upwards of $100K to better them. If these are only half as good, they are an absolute bargain. Edited June 26, 2020 by theok Link to comment Share on other sites More sharing options...
Recommended Posts