Jeffro Posted June 3, 2020 Share Posted June 3, 2020 Item Condition: Excellent Shipping Options: Pickup available but audition is not available. Suburb or Town: Padstow State: New South Wales Payment Method: Cash Reason for selling: Not required as gone active Further information: I'd forgotten how heavy this amplifier was until moving it out of rack recently. You want quality watts...then this is the amp for you quite simply! The ATC SPA2 150 power amplifier uses a grounded source output stage to deliver over 150W, driven by a buffer based on the discrete gain block which enables the SCA2 pre-amplifier to deliver such astonishing performance figures. Used in this way to drive the FET output stage, distortion components are more than 95db down under any conditions, ensuring totally clean and transparent sound with the effortless dynamics for which ATC is justly famous. Input to the amplifier utilises a similar discrete gain block and offers both balanced and unbalanced capability for universal system matching. This input buffer, which completely eliminates integrated circuits, achieves the same levels of transparency as the famous ATC SCA2 pre amplifier The output stage of the ATC SPA2-150 power amplifier is continuously monitored by microcomputer and a carefully programmed limiter prevents amplifier clip and protects loudspeaker drive units. Front panel indication of limiter operation is provided separately for each channel. Additionally the amplifier is monitored for over-temperature and DC offset. Construction is Twin-mono, with separate high capacity mains transformers for each channel. The FET output stage is very fast and layouts follow best RF practice with direct signal paths and direct low impedance power supplies. High quality connectors are used throughout including massive WBT terminals Grounded source output stage Balanced and unbalanced capability for universal system matching Construction is Twin-mono, with separate high capacity mains transformers for each channel High quality connectors are used throughout including WBT terminals Specifications: Power output 150 Watts per channel Input impedance 10k Ohms Frequency Response 5Hz - 200kHz Total harmonic distortion 0.1dB Dimensions (HxWxD) in mm 146x440x426 Weight 26kg Photos: Advertisements without photos of the actual item will not be approved. 1 Link to comment Share on other sites More sharing options...
Jacobc Posted June 3, 2020 Share Posted June 3, 2020 I hope you are in Melbourne... Link to comment Share on other sites More sharing options...
gillmaverick Posted June 3, 2020 Share Posted June 3, 2020 That's an absolute bargain. I believe the RRP was about 12k here in Aus. Audioaffair Website in UK has this one Listed for 5200 pounds right now. Good Luck with the sale Jeff. 1 Link to comment Share on other sites More sharing options...
Jeffro Posted June 3, 2020 Author Share Posted June 3, 2020 8 hours ago, Jacobc said: I hope you are in Melbourne... Sorry mate, Sydney Link to comment Share on other sites More sharing options...
mdc288 Posted June 4, 2020 Share Posted June 4, 2020 Im interesting with the amp, can u inbox me your number so i can contact you, thanks! Link to comment Share on other sites More sharing options...
Jeffro Posted June 4, 2020 Author Share Posted June 4, 2020 Sure no problem Link to comment Share on other sites More sharing options...
Jeffro Posted June 4, 2020 Author Share Posted June 4, 2020 Sold,pending payment Link to comment Share on other sites More sharing options...
kimmcblane Posted June 4, 2020 Share Posted June 4, 2020 Someone is going to be super Happy. Great piece / Bargain. Link to comment Share on other sites More sharing options...
Recommended Posts