Pallydou Posted May 19, 2020 Share Posted May 19, 2020 Hi guys, When you are on the road of hi-end hi-fi equipment, power supply is one topic attracting a lot of discussions. We hear a lot of good power cable names like voodoo. However here's the problem: majority of these power cables gives only British three-square pin plugs or American two-flat-pin-plus-one-round-pin plugs. There is none for Aussie plug. Also for power conditioning bars they give British and American formats like the product below. http://www.mshdpower.com/products_p.html?category=sockets&class=uk&oem=2&xml=MSUS06SRHKV2&model=MS-US06SRHK V2 While you are using these power bars, where do you find the cable from this bar to your wall socket? Or you simply do yourself a tradie and change the wall socket to British/ American? Link to comment Share on other sites More sharing options...
pwstereo Posted May 19, 2020 Share Posted May 19, 2020 2 minutes ago, Pallydou said: Or you simply do yourself a tradie and change the wall socket to British/ American? Definitely not! If the powerboard is rated for 240V you could change the line plug to an AU one. Link to comment Share on other sites More sharing options...
Pallydou Posted May 19, 2020 Author Share Posted May 19, 2020 4 minutes ago, pwstereo said: Definitely not! If the powerboard is rated for 240V you could change the line plug to an AU one. Peter, So you mean people can source good plugs to change instead of those from Bunnings. Link to comment Share on other sites More sharing options...
pwstereo Posted May 19, 2020 Share Posted May 19, 2020 Just now, Pallydou said: Peter, So you mean people can source good plugs to change instead of those from Bunnings. Middendorps, or AWM will have good line plugs. Link to comment Share on other sites More sharing options...
audiofeline Posted May 19, 2020 Share Posted May 19, 2020 SAFETY SAFETY SAFETY ! BEWARE! Australian power = 240V. Devices in Australia are required to meet the safety standards so they can manage this voltage safely. This approval ensures safety for the end user. UK power = 230V. Similar to Australia. There would be less concern in changing a UK power plug to an Australian power plug. However, the device has still not been approved for use in Australia. US power = 120V = less than half the voltage used in Australia! Changing the socket on US devices is dangerous, because they have only been designed to use half the voltage. Therefore, insulation may not work at the higher Aust voltage. DO NOT use these with 240V! A US power board can be used* in Aust. IF it is connected to a step-down transformer (that converts 240V to 115V) AND the current drawn by the power board does not exceed the max. current specified by the power board and the current rating of the step-down transformer. * Although I said it can be used, it still may not meet the Aust. electrical standards. Link to comment Share on other sites More sharing options...
pwstereo Posted May 19, 2020 Share Posted May 19, 2020 Plenty of 240V 10A plugs to choose from here: https://www.awm.mmem.com.au/general-wiring-accessories/general-electrical-accessories/plugs-sockets-adaptors.html Link to comment Share on other sites More sharing options...
JohnL Posted May 19, 2020 Share Posted May 19, 2020 21 minutes ago, audiofeline said: SAFETY SAFETY SAFETY ! BEWARE! Australian power = 240V. Devices in Australia are required to meet the safety standards so they can manage this voltage safely. This approval ensures safety for the end user. UK power = 230V. Similar to Australia. There would be less concern in changing a UK power plug to an Australian power plug. However, the device has still not been approved for use in Australia. US power = 120V = less than half the voltage used in Australia! Changing the socket on US devices is dangerous, because they have only been designed to use half the voltage. Therefore, insulation may not work at the higher Aust voltage. DO NOT use these with 240V! A US power board can be used* in Aust. IF it is connected to a step-down transformer (that converts 240V to 115V) AND the current drawn by the power board does not exceed the max. current specified by the power board and the current rating of the step-down transformer. * Although I said it can be used, it still may not meet the Aust. electrical standards. 2 Link to comment Share on other sites More sharing options...
aussievintage Posted May 19, 2020 Share Posted May 19, 2020 (edited) yes, we are 230V NOT 240V The problem I see, is there are all sorts of other regulations about insulation, spacing, earthing requirements, etc etc, that components sourced overseas may not comply with. Same for unapproved locally made stuff. Just changing the plug on the end to suit your wall socket won't fix those problems. Edited May 19, 2020 by aussievintage Link to comment Share on other sites More sharing options...
hiya Posted May 19, 2020 Share Posted May 19, 2020 1 hour ago, Pallydou said: Or you simply do yourself a tradie and change the wall socket to British/ American? https://en.wikipedia.org/wiki/AS/NZS_3112 Do not change the wall socket! At a glance the power conditioning bar in the link does not look like it is compliant with Australian Regulations. Someone can correct me but I would be worried about soldered joints on a mains bus bar unit where you could plug in multiple high current drawing devices. My view would be to buy an Australian certified unit and at least have some hope of claiming insurance after the house burns down! Link to comment Share on other sites More sharing options...
audiofeline Posted May 19, 2020 Share Posted May 19, 2020 1 hour ago, aussievintage said: yes, we are 230V NOT 240V My error is noted, thanks for the clarification. Link to comment Share on other sites More sharing options...
pwstereo Posted May 19, 2020 Share Posted May 19, 2020 (edited) 4 minutes ago, audiofeline said: My error is noted, thanks for the clarification. Ha, 240, 230, they say tomayto, we say tomarto, it's the distinction from the typical US 110 V we were both making Edit: PS, look at the voltage ratings on this page of plugs https://www.awm.mmem.com.au/general-wiring-accessories/general-electrical-accessories/plugs-sockets-adaptors.html Edited May 19, 2020 by pwstereo Added link to mains plugs with 240 and 250 V ratings 1 Link to comment Share on other sites More sharing options...
hiya Posted May 19, 2020 Share Posted May 19, 2020 Mains can range between 253 volts AC to 216 volts AC on a single phase circuit, hence the 250 volt rating of the sockets. The reasons for the the supply variance are varied and issues stabilising the voltage at 230 volts must be exceedingly difficult with the increased uptake of intermittent power generated by solar, wind etc distances of user from the generation site, time of day usage et al. 2 Link to comment Share on other sites More sharing options...
Pallydou Posted May 19, 2020 Author Share Posted May 19, 2020 Thanks for all your replies. Much appreciated. Let me tweak my question a little bit. This is a Voodoo cable sold in Australia. Definitely it is America standard (plug). This means you need an American-look power bar (but run in 240V). The amps is running in 240V of course. My original question was how do you find a good cable connecting the power bar to the wall socket. Getting a Clipsal plug to change is an option, but many audiophiles would have bad feeling on Clipsal. https://klappav.com.au/collections/voodoo-cable/products/x-ray Link to comment Share on other sites More sharing options...
pwstereo Posted May 19, 2020 Share Posted May 19, 2020 It’s “voodoo” alright. “Improves signal gain and colour saturation.” That is just ridiculous, buy a proper, approved AU plug for it and get on with listening to music. 3 1 Link to comment Share on other sites More sharing options...
t_mike Posted May 19, 2020 Share Posted May 19, 2020 1 hour ago, pwstereo said: It’s “voodoo” alright. “Improves signal gain and colour saturation.” That is just ridiculous, buy a proper, approved AU plug for it and get on with listening to music. ... and shouldn't cost more than $15 from Bunnings. 2 Link to comment Share on other sites More sharing options...
Guest Mr Thorens Posted May 19, 2020 Share Posted May 19, 2020 7 hours ago, pwstereo said: It’s “voodoo” alright. “Improves signal gain and colour saturation.” That is just ridiculous, buy a proper, approved AU plug for it and get on with listening to music. Have you owned a Voodoo cable before? The ones I’ve bought locally all have AU plugs already on them. The plug used was a HPM D90WE. So if you are buying in Australia they are perfectly legal. Link to comment Share on other sites More sharing options...
Guest Mr Thorens Posted May 19, 2020 Share Posted May 19, 2020 8 hours ago, Pallydou said: Thanks for all your replies. Much appreciated. Let me tweak my question a little bit. This is a Voodoo cable sold in Australia. Definitely it is America standard (plug). This means you need an American-look power bar (but run in 240V). The amps is running in 240V of course. My original question was how do you find a good cable connecting the power bar to the wall socket. Getting a Clipsal plug to change is an option, but many audiophiles would have bad feeling on Clipsal. https://klappav.com.au/collections/voodoo-cable/products/x-ray The models I’ve owned bought in Australia have an AU plug. They use the HPM finger grip plug D90WE. So all legal. Link to comment Share on other sites More sharing options...
ray4410 Posted May 19, 2020 Share Posted May 19, 2020 8 hours ago, Pallydou said: Thanks for all your replies. Much appreciated. Let me tweak my question a little bit. This is a Voodoo cable sold in Australia. Definitely it is America standard (plug). This means you need an American-look power bar (but run in 240V). The amps is running in 240V of course. My original question was how do you find a good cable connecting the power bar to the wall socket. Getting a Clipsal plug to change is an option, but many audiophiles would have bad feeling on Clipsal. https://klappav.com.au/collections/voodoo-cable/products/x-ray why would anybody have bad feelings about a Clipsal plug,just about every home/business in Australia have either Clipsal or hpm wall outlets/light switches fitted througuout their homes,nothing wrong with the clipsal1439s. 3 Link to comment Share on other sites More sharing options...
Pallydou Posted May 19, 2020 Author Share Posted May 19, 2020 15 minutes ago, ray4410 said: why would anybody have bad feelings about a Clipsal plug,just about every home/business in Australia have either Clipsal or hpm wall outlets/light switches fitted througuout their homes,nothing wrong with the clipsal1439s. Don't get me wrong. I use a lot of Clipsals/HPMs/Jacksons on my appliances. Some may just say "oh the pins are not 24K gold plated" whatever. You know, sometimes audiophiles may strive for everything perfect from the wall plug on the wall to appliance. For me, as long as that plug gives power I am fine with it. I am just curious. 1 Link to comment Share on other sites More sharing options...
Steffen Posted May 19, 2020 Share Posted May 19, 2020 I phoned my energy company and asked whether the ~20m cable from the power pole to my house was cryogenically treated. They said no. 2 4 Link to comment Share on other sites More sharing options...
Lochawe Posted May 19, 2020 Share Posted May 19, 2020 55 minutes ago, Steffen said: I phoned my energy company and asked whether the ~20m cable from the power pole to my house was cryogenically treated. They said no. Mine isn't shielded either : ) 1 Link to comment Share on other sites More sharing options...
andyr Posted May 19, 2020 Share Posted May 19, 2020 1 hour ago, ray4410 said: why would anybody have bad feelings about a Clipsal plug,just about every home/business in Australia have either Clipsal or hpm wall outlets/light switches fitted throughout their homes,nothing wrong with the clipsal1439s. Hi Ray - the Clipsal 1439s is a 20a plug, right? So it has a wider earth pin than a normal 10a plug and will only fit into a 20a wall socket (which has a wider earth-pin slot)? Thanks, Andy Link to comment Share on other sites More sharing options...
ray4410 Posted May 20, 2020 Share Posted May 20, 2020 no andy the 1439s is a standard 10amp wall plug the Clipsal plug with the wider earth blade is 1439s15 ray. Link to comment Share on other sites More sharing options...
t_mike Posted May 20, 2020 Share Posted May 20, 2020 3 hours ago, Mr Thorens said: The models I’ve owned bought in Australia have an AU plug. They use the HPM finger grip plug D90WE. So all legal. It's legal if the whole cord has Australian standards approval, otherwise only the plug is legal. Talk about it with your insurance company, I'm sure they can give you the details. Link to comment Share on other sites More sharing options...
The Rock Puppy Posted May 20, 2020 Share Posted May 20, 2020 13 hours ago, Pallydou said: Thanks for all your replies. Much appreciated. Let me tweak my question a little bit. This is a Voodoo cable sold in Australia. Definitely it is America standard (plug). This means you need an American-look power bar (but run in 240V). The amps is running in 240V of course. My original question was how do you find a good cable connecting the power bar to the wall socket. Getting a Clipsal plug to change is an option, but many audiophiles would have bad feeling on Clipsal. https://klappav.com.au/collections/voodoo-cable/products/x-ray Just had a quick look at the Klapp site mentioned above, and at the end of the description it says that it's available with the AC plugs listed below, and then fails to give a list of available options. Probably a fair bet to say that the only available option is an Australian plug. I would have thought that selling a power cord of whatever price with anything else would be prohibited. Might not be, but it would be a bit iffy. Link to comment Share on other sites More sharing options...
Recommended Posts