Jump to content

MAXXX

SOLD: FS: HALCRO MC 50 power amplifier

Recommended Posts

Item Condition: Excellent, boxed
Shipping Options: Pickup available but audition is not available.,Shipping is included in price.
Suburb or Town: Kardinya
State: Western Australia
Payment Method: PayPal as friend, bank transfer, cash
Reason for selling: Change of mind

Further information: 

Purchase here few days ago from Eagleeyes, planned to use it as stereo amp only (bi-amping) but decided to get some smaller mono blocs...I'll just copy description and photos of actual item from previous owner(s).

 

The only thing I added was few  new pads for amp feet (few were missing...).

 

Local sale preferred, but I can send it via couriers with tracking for $80  (Australia only).

 

Recently replaced 1 module from Magenta at about $500 (great that this is so easily repaired. 4 screws).  (You will get replaced module as well.)

RRP was about $7,000 USD when new

 

I have original double boxes to post, installation CD and manual.

 

Modules are very easy to turn on and off which is very handy to keep some spare if not being used

 

  • Power Output: 350W RMS continuous into 4 Ohms
  • Distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms, <0.03% at 7kHz at all powers up to 350W
  • Unbalanced and Balanced Voltage Inputs
  • Thermally controlled forced air cooling
  • Mains Voltage: 190 – 250VAC
  • Remote trigger switch between On & Standby
  • Command Functions:
    • Switch between On & Standby
    • Ability to inhibit individual amplifier modules
    • Amplifier module will indicate Over Temperature condition
  • Halcro Reliability Assurance Service

 

 

SPECIFICATIONS:
Inputs, selectable

Unbalanced: RCA sockets

Balanced: XLR sockets

Outputs

Internally bridged: Binding Posts

 

Command Functions

Switch between On & Standby

Ability to inhibit individual amplifier modules

Amplifier module will indicate Over Temperature condition

Amplifier module will indicate Over Current condition

Halcro Reliability Assurance Service

 

Gain

Unbalanced and balanced: 29x = 29dB

 

Power Supply

Universal switch mode

Power factor corrected

Fully protected

Compliant in all countries

 

Fault Indications

LED turns red if Heatsink temperature exceeds 78°C

LED flashes red if current limit exceeded

 

Distortion

THD:<0.005% at 1kHz at all powers up to 350W into 4ohms

0.02% at 7kHz at all powers up to 350W (typically <0.01% at 350W)

Noise: <30nV/sqrt(Hz) @ 1kHz referred to input

 

Impedance
Input

Unbalanced: 10k Ohms

Balanced: 10k Ohms

Output impedance at 7kHz

<80 milliohms

 

Power
Consumption

Idle: <14W

350W with 4 Ohm load: <22W heat (>94% efficient)

 

Mains Voltage

100-250 VAC

 

Dimensions

Weight: 25.0 kg

Height: 7 inches or 169mm

Width: 17 inches or 438mm

Depth: 16 inches or 410mm

 

 

 

 

 

 

 


 
Photos: Advertisements without photos of the actual item will not be approved.

DSC03291.thumb.JPG.a1986d81f5f5a06f6313e2335af999c9.JPG

DSC03292.thumb.JPG.6a5a871c8b7655861db2ac4351baf23e.JPG

DSC03293.thumb.JPG.36dd05c3245f69e45b5ce9cb5871bcab.JPG

DSC03294.thumb.JPG.6cf3209f720cd6c2b5413dcde5a18724.JPG

DSC03295.thumb.JPG.72215d518b78026507ff38158c261930.JPG

Share this post


Link to post
Share on other sites

Bargain!

Share this post


Link to post
Share on other sites

Hi @MAXXX, I'm interested just a couple of questions.

 

How many previous owners?

The age of the unit?

And the likely hood of the caps needing to be done?

 

Cheers

Marty

 

Share this post


Link to post
Share on other sites

Hi Marty,

 

not sure about previous owners except Eagleeyes and Bunno77.

It seems that Bunno77 had it for a few years (you can check their recent posts).

He can provide more info about the unit.

 

Cheers

Share this post


Link to post
Share on other sites


Guest
This topic is now closed to further replies.

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...