Jump to content

Recommended Posts

Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition.,Shipping is included in price.
Suburb or Town: Figtree (Wollongong)
State: New South Wales
Payment Method: Paypal, Cash on Pick Up, Direct Bank Deposit
Reason for selling: too much stuff

Further information: 

The REL T9i (Gloss Black) is the top of the range Ti-Series subwoofer.  It has had little use.

 

·       Drivers: 254mm long-throw front-firing drive unit & down-firing 254mm passive radiator

·       Amplifier Output: 300 Watt Class A/B power amplifier

·       Controls: 3 x Rotary Controls for (1) Hi/Low Level (2) .1/LFE Level (3) Crossover Frequency

·       Inputs: Dedicated inputs for Hi Level (Speakon), Low Level (RCA) and .1 (RCA)

·       Crossover: Extremely low crossover points that allow seamless “blending” with any loudspeaker

·       Proprietary REL-D™ digital amplifier input provides the impedance and grounding for most Class D amplifiers.

·       Lower Frequency Response: 28Hz at -6 dB in room

·       Input Connectors: Hi Level Neutrik Speakon, Lo Level single phono, LFE phono

·       Input Impedance: High Level: 150k, Low Level: 10k, .1/LFE: 10k ohms

·       Gain Control: Range: 80 dB

·       Phase Switch: Yes, 0 or 180 degrees

·       Protective System: Fully Electronic SET-SAFE

·       Mains Input Voltage: 220-240V 50Hz

·       Detachable Power Cord: Allows for upgrade to better quality cord.

·       Dimensions Inc. Feet (WxHxD): 330 x 387 x 407mm

·       Nett Weight: 18.7kg

·       Feet: Milled aluminium feet

·       Neutrik Speakon Interconnect: Yes (10 Metres)

 

Buyer to pay freight.  I can assist by taking the unit to Australia Post or other courier in Wollongong.

 


 
Photos: Advertisements without photos of the actual item will not be approved.

IMG20200511082616.jpg

P1000843.JPG

P1000848.JPG

P1000850.JPG

P1000853.JPG

Edited by peterr
  • Like 1
Link to post
Share on other sites


How is this still here????

 

I would buy it myself but not sure the Rel connections will suit what I have in mind.

 

GLWTS.

 

Regards Cazzesman

  • Like 1
Link to post
Share on other sites
8 hours ago, cazzesman said:

How is this still here????

 

I would buy it myself but not sure the Rel connections will suit what I have in mind.

 

GLWTS.

 

Regards Cazzesman

Was thinking the same...I’m in the same position...only have L/R pre-out outs from my stereo amp. 

Link to post
Share on other sites


1 hour ago, JC. said:

Was thinking the same...I’m in the same position...only have L/R pre-out outs from my stereo amp. 

FWIW and IIRC, the Neutrik Speakon cable’s recommended config is to wire it to the same posts as the stereo speakers.

  • Like 1
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.




×
×
  • Create New...