Willmax Posted April 1, 2020 Share Posted April 1, 2020 (edited) I am seeking some advice/opinions from the more experienced members about the Ortofon M20E Super cartridge with Linn Ittok LV II tonearm. I have to admit that I am not clued in at all when it comes to cartridge and tonearm combinations, particularly the Linn Sondek LP12 parts and upgrades. My turntable came with this cart/tonearm configuration when I bought it, so I've always wondered if changing to a different cart would yield a sound improvement (no pun intended), not that it sounds bad, I actually don't mind how it sounds at the moment. I have a number of carts that I wanted to try but just not sure whether they'd be suitable for the Ittok LV II tonearm, for instance in terms of compliance, etc... Maybe the Ortofon M20E Super is already better than everything else I've got, for example - Denon DL-110 & DL-103 LCII, Ortofon 2M Red, AT95E - Who knows? Over to you... Edited April 14, 2020 by Willmax update title Link to comment Share on other sites More sharing options...
Willmax Posted April 1, 2020 Author Share Posted April 1, 2020 A couple of pics to illustrate my question Link to comment Share on other sites More sharing options...
GregWormald Posted April 1, 2020 Share Posted April 1, 2020 The LVII is an excellent arm--and can be substantially upgraded by Audio Origami if wanted--(I am an enthusiastic customer.) I'm not an expert on the arm/cartridge combinations but someone should be along shortly with ideas about matching compliance etc. 1 Link to comment Share on other sites More sharing options...
Guest Posted April 2, 2020 Share Posted April 2, 2020 Of your list the 103 might be an improvement, up to your ears of course! The Ittok is capable of carrying some very good carts though, think Dynavector, Benz etc 1 Link to comment Share on other sites More sharing options...
Willmax Posted April 2, 2020 Author Share Posted April 2, 2020 20 hours ago, GregWormald said: The LVII is an excellent arm--and can be substantially upgraded by Audio Origami if wanted--(I am an enthusiastic customer.) I'm not an expert on the arm/cartridge combinations but someone should be along shortly with ideas about matching compliance etc. Thanks Greg for your comments, being a newbie when it comes to the LP12, it is certainly reassuring to hear it is an excellent arm. Who would you recommend to do such an upgrade in Adelaide? 5 hours ago, Grizzly said: Of your list the 103 might be an improvement, up to your ears of course! The Ittok is capable of carrying some very good carts though, think Dynavector, Benz etc Yes that would seem to be the case, however I'm not sure my amplifiers can adequately work with the 103 cart. From the little information I could find on the net, seems to indicate the M20E to be a good cart, just how good is the question... Link to comment Share on other sites More sharing options...
Guest iant Posted April 2, 2020 Share Posted April 2, 2020 (edited) The M20E is probably not an ideal partner for the Ittok,it's more suited to low mass arms like the Grace 707. https://www.vinylengine.com/cartridge_resonance_evaluator.php Edited April 2, 2020 by iant Link to comment Share on other sites More sharing options...
GregWormald Posted April 2, 2020 Share Posted April 2, 2020 (edited) 5 hours ago, Willmax said: Who would you recommend to do such an upgrade in Adelaide? It might not be worth it for the M20E. I don't know of anybody here. You might try asking Jim Tate Stereo (Linn dealer) although I suspect he would not like the idea at all. I sent mine to Audio Origami in Glasgow UK. I found him to be exceptionally knowledgeable and helpful. He rewired it, checked it out completely, made a special long cable and did the foam fill. He later repaired the wiring free when I was really stupidand stuffed it up. Edited April 2, 2020 by GregWormald 1 Link to comment Share on other sites More sharing options...
hugo_wilco Posted April 2, 2020 Share Posted April 2, 2020 would sound great if you are an Ortofon fan like me. 2 Link to comment Share on other sites More sharing options...
Willmax Posted April 6, 2020 Author Share Posted April 6, 2020 On 02/04/2020 at 7:35 PM, iant said: The M20E is probably not an ideal partner for the Ittok,it's more suited to low mass arms like the Grace 707. https://www.vinylengine.com/cartridge_resonance_evaluator.php Thank you for this link, below are the results for the Ittok LVII, now I need to do some research and find out where each cartridge sits. Link to comment Share on other sites More sharing options...
Guest iant Posted April 6, 2020 Share Posted April 6, 2020 (edited) 39 minutes ago, Willmax said: Thank you for this link, below are the results for the Ittok LVII, now I need to do some research and find out where each cartridge sits. If the specifications at Vinyl Engine are correct the M20E has a very high compliance of 40cu.This would require a low mass arm under 6g for compatibility. Very few arms today would meet this criteria,the average eff.mass being around 10g+ .The Linn ITTOK is 13.5g thus suggesting carts in the 10-20cu range as suitable partners. https://www.vinylengine.com/cartridge_database.php?m=Ortofon&mod=m20e&t=any&sort=2&Search=Search&sty=&ovlo=&ovhi=&can=&dclo=&dchi=&stid=&masslo=&masshi=¬es=&prlo=&prhi= Edited April 6, 2020 by iant Link to comment Share on other sites More sharing options...
Willmax Posted April 6, 2020 Author Share Posted April 6, 2020 Hmm, interesting I'm glad I asked the question. Looking at VE database for the Ittok, I got the effective mass figure of 11.5g - is there something else I need to consider? Are the extra 2.0g related to the mounting screws perhaps? PS: those links are a pretty handy resource. thanks for sharing. Link to comment Share on other sites More sharing options...
Guest iant Posted April 6, 2020 Share Posted April 6, 2020 (edited) 6 hours ago, Willmax said: Looking at VE database for the Ittok, I got the effective mass figure of 11.5g - g. Yes there does seem to be some slight disparity in specifications.Out of interest I checked Martin Collom's original ITTOK review in HFC.He measured approx 13.5g including headshell screws.Linn's later but very similar EKOS is quoted at 11.5g. https://www.vinylengine.com/tonearm_database.php?make=Linn&mdl=&sort=2&ascdesc=ASC&search=search&eflo=&efhi=&mdlo=&mdhi=&ohlo=&ohhi=&amlo=&amhi=&cw= Edited April 6, 2020 by iant Link to comment Share on other sites More sharing options...
Willmax Posted April 10, 2020 Author Share Posted April 10, 2020 (edited) I've come across the specs for the M20E Super cart. Edited April 10, 2020 by Willmax Link to comment Share on other sites More sharing options...
Guest iant Posted April 10, 2020 Share Posted April 10, 2020 (edited) Another option is to upgrade the stylus to Ortofon's M20FL. This is the fine line version of the M20E Super with a lower compliance of 20cu rendering it suitable for medium mass tonearms like the Ittok. Thakker in Europe has replacement stylii for these and specifies that it is compatible with the M20E Super. https://www.thakker.eu/en/needles/ortofon-d-20-fl-super-stylus-for-m-20-fl-super-genuine-stylus/a-5900/#description Edited April 10, 2020 by iant Link to comment Share on other sites More sharing options...
Willmax Posted April 11, 2020 Author Share Posted April 11, 2020 Thanks @iant for that, I might consider that stylus as an option. Unfortunately the data from Stereo Review on the M20E Super cart seems to be incorrect. The Vinyl Engine Database indicates the output of the M20E Super to be 4mV instead of 0.8mV - this is further corroborated by the fact that I have been successfully using the cart with MM phono stage on all my amplifiers. Looking at my current carts, it seems the 2M Red would be the best match, still not perfect but certainly better than M20E Super which is currently installed. Now I need to find out how to change the cart and adjust all parameters on my Ittok LV II tonearm....the search continues. Link to comment Share on other sites More sharing options...
wen Posted April 11, 2020 Share Posted April 11, 2020 i would consider the Ortofon 2M Red a very minor step up from the M20E, you would have to start at the Bronze(in my opinion) to make the change truely worthwhile, if staying with Ortofon Link to comment Share on other sites More sharing options...
Guest iant Posted April 11, 2020 Share Posted April 11, 2020 (edited) The 2M series are reputed to sound more forward than the older Ortofons.This in combination with the Ittok's reputation for a slight emphasis in the upper midrange may not make for a happy marriage. Mike Fremer did a shootout with the 2M Blue vs the ATVM95ML.The 2M Blue does sounds noticeably brighter on these clips listening via headphones. https://www.analogplanet.com/content/ortofon-2m-blue-versus-audio-technica-vm95ml Edited April 11, 2020 by iant Link to comment Share on other sites More sharing options...
eman Posted April 11, 2020 Share Posted April 11, 2020 13 hours ago, Willmax said: Thanks @iant for that, I might consider that stylus as an option. Unfortunately the data from Stereo Review on the M20E Super cart seems to be incorrect. The Vinyl Engine Database indicates the output of the M20E Super to be 4mV instead of 0.8mV - this is further corroborated by the fact that I have been successfully using the cart with MM phono stage on all my amplifiers. Looking at my current carts, it seems the 2M Red would be the best match, still not perfect but certainly better than M20E Super which is currently installed. Now I need to find out how to change the cart and adjust all parameters on my Ittok LV II tonearm....the search continues. Look out for the different way the Japanese carts are measured compered to the Euros. It could be why they've ended up high. Can't remember how it works. Something to do with measuring something at 10hz instead of 100hz. Can someone comment if my rambling is relevant please ? Link to comment Share on other sites More sharing options...
Warren Jones Posted April 17, 2020 Share Posted April 17, 2020 I used to own an LP/Ittok with a Troika and they were a good combination. Have a read through this blog. I like these guys as their approach is scientific and I do believe if you can measure it you can hear it as long as the ears allow. https://korfaudio.com/blog67 1 Link to comment Share on other sites More sharing options...
Willmax Posted May 10, 2020 Author Share Posted May 10, 2020 (edited) On 11/04/2020 at 11:10 PM, iant said: The 2M series are reputed to sound more forward than the older Ortofons.This in combination with the Ittok's reputation for a slight emphasis in the upper midrange may not make for a happy marriage. Mike Fremer did a shootout with the 2M Blue vs the ATVM95ML.The 2M Blue does sounds noticeably brighter on these clips listening via headphones. https://www.analogplanet.com/content/ortofon-2m-blue-versus-audio-technica-vm95ml Hey @iant , you were spot on regarding the characteristics of the 2M Red with Ittok. Let me say that the marriage did not last very long at all, I think it did not endure a whole week. The Denon DL-110 cart on the other hand is making beautiful music from the Ittok. I added an extra 3g between the cart and headshell to further improve the cart & mounting hardware total mass which seems to have worked favourably. So much so that I stopped looking for any new carts alternative. Thanks so much for your input, it has been very helpful to me. It is very much appreciated. Edited May 13, 2020 by Willmax 1 Link to comment Share on other sites More sharing options...
Willmax Posted May 10, 2020 Author Share Posted May 10, 2020 Link to comment Share on other sites More sharing options...
Recommended Posts