Jump to content

Sign in to follow this  
erest

FS: Dynaudio Accent 3 custom passive crossover speakers

Recommended Posts

Posted (edited)
Price: $2500
Item Condition: Excellent
Shipping Options: Pickup available but audition is not available.
Suburb or Town: KEYSBOROUGH 3173
State: Victoria
Payment Method: EFT, Paypal, cash on pickup
Reason for selling: Too many speakers

Further information: 

Bought the enclosures, with brand new Dynaudio Accent 3 drivers from Tom at Speakerbits a while back.

The active amps were faulty, so new custom bases were designed for these speakers with bass reflex ports.

Tom had the correct crossover circuits for these, and I did the custom build.

Amaaaazing sounding speakers with massive fast bass for bass reflex design. Midrange is superb. Imaging with huge sound stage.

Cannot fault these, but really too big for my 3m x 4m mancave. They need more room to breathe. Thus the sale.

Some ageing on the cabinets, and minor marks, but very presentable. Weigh in at about 35 Kgs each.

Crossovers are built into separate base cavities of the speakers, and are accessed by removing base plinths.

They have high quality components. Jantzen coils and caps with Obbligato caps on tweeter/mid section.

Sizes: 280W x 350D x 1170H. Plinths are larger. These are, as originally no grilles design.
 
Photos: 

DSCF0670s.jpg

DSCF0673s.jpg

DSCF0675s.jpg

DSCF0676s.jpg

DSCF0677s.jpg

DSCF0678s.jpg

DSCF0833s.jpg

Edited by erest

Share this post


Link to post
Share on other sites

Nice!!!

Share this post


Link to post
Share on other sites

They are BEAUTIFUL speakers!!!

GLWTS.

Share this post


Link to post
Share on other sites

Wow! They are gorgeous! GLWTS

 

On a side note - you always have the coolest stuff for sale!!

Share this post


Link to post
Share on other sites


Beautiful finish. 

Share this post


Link to post
Share on other sites

Hi, what's the height of these?  Dynaudio website says 40cm, which just doesn't look right.  Also are there any grills and where would these sit relative to other speakers in Dynaudio's current range.  Also, being rear ported, do they need to be set up a fair distance from the wall?

Share this post


Link to post
Share on other sites
Posted (edited)

Height is as as per the ad above 1170 including plinths, but spikes would be extra.

These were never a grilled design. Best to have them at least 500mm off the back wall.

Just Google for Dynaudio Accent 3, and the Dynaudio site comes up...

 

Edited by erest

Share this post


Link to post
Share on other sites


Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By icon
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Frankston sth State: Victoria Payment Method: EFT, Cash on Pickup Reason for selling: No longer required Further information: 
       For sale is the very rare ME900 mono block 1 only, I have never actually seen another one on the second hand market....
       It has been on home theatre centre channel duties & live its life in a ventilated cabinet hence the excellent condition.
       Comes with original timber shipping crate & cover bag.
       Has just had it's 10 year service performed by Ron Berger of Winovate works carried out
       
       2 x 2way & 4x 3way  rising clamp screw terminals replaced with modern clamps more suited to the wire sizes used.
      Visible light fan speed sensor replaced with new info red sensor sourced from Peter Stein.
       Air inlet & fan baffle foam replaced.
      All ageing Electrolytic Capacitors replaced.
      Bias currents adjusted.

      Photos: Advertisements without photos of the actual item will not be approved.






    • By Analysis
      Item Condition: Good Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Caulfield North State: Victoria Payment Method: PayPal (+ fees), EFT, Cash on Pickup etc Reason for selling: NLR Further information: The ZS5300 brings Marantz excellence to the custom market with a full 60 watts RMS output from each of its six channels. You can
      bi-wire the front speakers for your home theatre to have 120watts per channel, or for those who want to extend high quality audio from their main entertainment area to many rooms in a home, office and cafe. It will direct up to three separate sources to three different rooms or zones.
      Need even more coverage? Simply use up to three ZS5300s for nine-zone capability. Party mode lets you send the same signal throughout your home. You'll find front panel source and zone status indicators. And ''pass through'' pre-amp outputs so you can add a more powerful amplifier if needed. An RC-5 remote connection, local input capability, and 12V ''trigger'' outputs complete the list of custom-friendly features.
      The amplifier is in used condition with some marks on the face, but it doesn't effect the operation. Please refer to the photos for description. 
      Comes with power cord and remote.
       
      Photos:


      Advertisements without photos of the actual item will not be approved.
    • By rewindhifi
      Item Condition: Good Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Hinchinbrook NSW 2168 State: New South Wales Payment Method: Paypal via Friend, Cash on Pick Reason for selling: NR Further information: 
       
      Features:
      - Volume control
      - Stereo RCA output
      - Function can be set to mix or IND
      - Screw mount holes
      - Power: 12VDC @ 0.5A
      - Input Impedance : 47KΩ
      - Output Impedance : 100Ω
      - Phono Amplitude Gain : 40dB (@ 1KHz)
      - AUX Amplitude Gain : 6 dB
      - Maximum Input : 50mVpp
      - Output Level : 5Vpp
      - Frequency Response : 20 Hz to 20KHz
      - Signal to Noise Ratio : 70dB
       
      Shipping: $15
       
      Here is a review by fellow SNA
       
      Photos: Advertisements without photos of the actual item will not be approved.




    • By lucius72
      Item Condition: Brand New Sealed Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: BERWICK State: Victoria Payment Method: Paypal+ 3% , EFT, Cash on pickup. Reason for selling: NLR Further information:  Purchased for a setup but I would rather prefer speakers.
       
       
      Cables
      Three cables are included with the SE-MONITOR5. 5.2' and 9.8' unbalanced cables are made with dual-braided wires and have gold-plated 3.5mm stereo connectors. The 5.2' balanced cable has dual-braided wires as well, and it terminates in a gold-plated 2.5mm 4-pole stereo connector. This cable splits left and right signals to eliminate crosstalk.
      Earpads
      For all-day comfort, the SE-MONITOR5 come with two pairs of memory-foam earpads. One is wrapped in leather-like material while the other is covered in a velour-type cloth.
       
      HI-RES STEREO HEADPHONES
      Start Your Own Hi-Res Audio Tradition
      Make a telepathic connection to music with the SE-MONITOR5. As a fully-enclosed dynamic stereo headphone that provides an excellent listening environment, focus is placed on faithful reproduction of Hi-Res Audio formats. Yet Pioneer has voiced them to convey music’s emotional intent for a listening experience that moves mind and soul. Achieving this meant exploring new driver materials, innovating structures that limit resonance, and introducing proven technologies unveiled with our SE-MASTER1 flagship. Blending time-tested approaches with the latest in materials science, these headphones let music unfurl over a vast soundstage with localization, detail, and control that’s captivating. Shipping with balanced and unbalanced cords, the SE-MONITOR5 presents a unique opportunity to reignite your passion for music in comfort and style.
       
      Audio Features
      50 mm (1.96") Cellulose Nano-Fiber Wide-Spectrum Driver Magnesium Alloy Base and Housing to Reduce Resonance Advanced Double Chamber Construction with Ports for Bass Definition and Clarity Magnesium Alloy Housing with Original Diffuser to Reduce Distortion Copper-coated Aluminum Voice Coil and Large Magnet Full-frame Magnesium Alloy Basket with Screws Cable 3.0 m OFC litz wire Floating Structure with Rubber Insulators to Reduce Vibration and Cross-channel Interference  

    • By lucius72
      Item Condition: Used but in mint condition. Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: BERWICK State: Victoria Payment Method: Paypal+ 3% , EFT, Cash on pickup. Reason for selling: NLR Further information: 
      For sale is a 
        Fostex HP-A8 32-Bit DAC / Headphone amplifier / Preamp in mint condition.
        It’s been updated to the latest 3.1 firmware which allows DSD64 (2.8Mhz) through USB.
      It comes with a remote, owner's manual and power cable.
      AKASHI KASHEI AK4399. Toroidal Transformer.
        Made in Japan.
        HP-A8 32-bit DAC Headphone Amplifier   
Model HP-A8 is a Fostex’s flagship DAC Headphone Amplifier offering finely built analog and digital circuitry designs as well as epoch-making DSD file reproduction function.
       

       
      •High quality 32-bit DAC (AK4399) and all discrete analog circuitry headphone amplifier for maximum sound quality
      •USB High Speed up to 32bit*/192kHz (*24bit on Windows)
      •Asynchronous mode using high precision TCXO clock
      •Audiophile quality electronic volume
      •Large capacity toroidal power transformer for ample power supply
      •Built-in SD card drive to reproduce DSD (dsf) and WAV file.
      •Internal Clock or External Clock mode selectable
      •Up-sampling function (x2, x4 and OFF)
      •Selectable digital filter; sharp roll-off or short-delay
      •24-step gain control for headphone out
      •Headphone direct out mode bypassing the volume circuit for line output
      •Comes with a handy dedicated remote controller
      •Inputs: USB, AES/EBU, Coaxial, Optical x 2, Analog RCA
      •Outputs: Phones x 2, Analog RCA, Optical  
       







×
×
  • Create New...