Jump to content

Sign in to follow this  
MAXXX

SOLD: FS: HALCRO Logic MC20, power amplifier (relisted)

Recommended Posts

Item: HALCRO Logic MC20, power amplifier
Location: Perth
Price: $2000
Item Condition: Excellent 9/10
Reason for selling: Too many amps
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:

Purchased app. 4 months ago from Simply HIFI here in Perth.

  • Power Output: 400W RMS continuous into 4 Ohms
  • Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W
  • Unbalanced and Balanced Voltage Inputs
  • Mains Voltage: 100 – 120VAC or 190 – 250VAC
  • Remote trigger switch between On & Standby
  • Command Functions:
    • Switch between On & Standby
    • Ability to inhibit individual amplifier modules
    • Amplifier module will indicate Over Temperature condition
  • Halcro Reliability Assurance Service
  • Dimensions

  • Weight: 49.8lb or 21.1 kg
  • Height: 7 inches or 169mm
  • Width: 17 inches or 438mm
  • Depth: 16 inches or 410mm
  •  

Local sale preferred (demo, proper check-up etc.), but happy to send as well...Currently hooked on ProAc Studio 140.

Lots of reviews on Net.

Asking price is less than half of other Halcro MC20 advertised on Ebay...

 

Note: No original box, comes with the manual. Minor imperfection on front  left corner as seen on the  photo.

 
Photos: Advertisements without photos of the actual item will not be approved.

1.jpg

2.jpg

3.jpg

4.png

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Marc
      Item Condition: Used, but excellent with original packaging Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Sunbury State: Victoria Payment Method: Paypal (+fees), Cash on Pickup, EFT, Credit Card (+ fees) Reason for selling: Moved to Dante enabled amps Further information: 

      This amp is still in the current JBL Synthesis range and is spec'd in many high end JBL Synthesis cinema systems, selling for over $6,000 locally.
      https://www.jblsynthesis.com/products/electronics/amplifiers/SDA+7200-.html?dwvar_SDA 7200-_color=Black Lacquer-GLOBAL-Current&cgid=amplifiers
       
      Can freight with insurance at cost Australia wide via Sendle.
       

       
       

      Photos:
       

       
       
      Stock photos:
       

    • By Eagleeyes
      Item Condition: both excellent Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition.,Shipping is included in price. Suburb or Town: Perth State: Western Australia Payment Method: Paypal, cash, EFT Reason for selling: 2 systems in one room - lost battle very low WAF Prices are individually listed and exactly what I paid plus freight to
      Perth - want to sell as a pair ---only Bought last week with matching Mc 2O to set up home theatre again and run independently from main system, wife had other plans so back on SNA they go. Freight is not too bad about 100 on average each to anywhere in Aus.   I push the system size alot but this was a jump too far.   MC 50 5 channel     
      Recently replaced 1 module from Magenta at about $500 (great that this is so easily repaired. 4 screws)
      RRP was about $7,000 USD when new
       
      I have original double boxes to post and manual. Modules are very easy to turn on and off which is very handy to keep some spare if not being used
       
      Power Output: 350W RMS continuous into 4 Ohms Distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms, <0.03% at 7kHz at all powers up to 350W Unbalanced and Balanced Voltage Inputs Thermally controlled forced air cooling Mains Voltage: 190 – 250VAC Remote trigger switch between On & Standby Command Functions: Switch between On & Standby Ability to inhibit individual amplifier modules Amplifier module will indicate Over Temperature condition Halcro Reliability Assurance Service  
       
      SPECIFICATIONS:
      Inputs, selectable
      Unbalanced: RCA sockets
      Balanced: XLR sockets
      Outputs
      Internally bridged: Binding Posts
       
      Command Functions
      Switch between On & Standby
      Ability to inhibit individual amplifier modules
      Amplifier module will indicate Over Temperature condition
      Amplifier module will indicate Over Current condition
      Halcro Reliability Assurance Service
       
      Gain
      Unbalanced and balanced: 29x = 29dB
       
      Power Supply
      Universal switch mode
      Power factor corrected
      Fully protected
      Compliant in all countries
       
      Fault Indications
      LED turns red if Heatsink temperature exceeds 78°C
      LED flashes red if current limit exceeded
       
      Distortion
      THD:<0.005% at 1kHz at all powers up to 350W into 4ohms
      0.02% at 7kHz at all powers up to 350W (typically <0.01% at 350W)
      Noise: <30nV/sqrt(Hz) @ 1kHz referred to input
       
      Impedance
      Input
      Unbalanced: 10k Ohms
      Balanced: 10k Ohms
      Output impedance at 7kHz
      <80 milliohms
       
      Power
      Consumption
      Idle: <14W
      350W with 4 Ohm load: <22W heat (>94% efficient)
       
      Mains Voltage
      100-250 VAC
       
      Dimensions
      Weight: 25.0 kg
      Height: 7 inches or 169mm
      Width: 17 inches or 438mm
      Depth: 16 inches or 410mm
       
       
      both is superb condition, with books and original boxes.
       
      MC20 $1600
       
      Mint condition previous owner had for  4 years and have rarely used it as I have always had too many other amps to mess with
       
      Here are the specs.
       
      Power Output: 400W RMS continuous into 4 Ohms
      Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W
      Unbalanced and Balanced Voltage Inputs
      Mains Voltage: 100 – 120VAC or 190 – 250VAC
      Remote trigger switch between On & Standby
      Command Functions:
      Switch between On & Standby
      Ability to inhibit individual amplifier modules
      Amplifier module will indicate Over Temperature condition
      Halcro Reliability Assurance Service
      Dimensions
      Weight: 49.8lb or 21.1 kg
      Height: 7 inches or 169mm
      Width: 17 inches or 438mm
      Depth: 16 inches or 410mm
       





       
       
       
      mc 20
       
       



    • By jdh500
      Item Condition: 9/10, used but works as new with original packaging Shipping Options: Pickup available but audition is not available.,Shipping is included in price. Suburb or Town: West Ryde 2114, metro Sydney State: New South Wales Payment Method: EFT, Cash on Pickup PayPal (+3%) Reason for selling: Down Sizing Second System Further information: 
       
      This is a perfect matching 2ch high end Preamp/Poweramp Combo.
       
      Ideal for either a dedicated 2ch music system with high quality sources or alternatively integrated with an AV surround system. Ie. Pre3 has a HT bypass input so you can channel all the front channels through the Pre3/s500 power amp to provide better quality sound and provide 2 additional 2x250w of power to your front speakers.
       
      Made in the USA, Purchased through Australian Distributor,Comes as shown in the photos with all original packaging, manuals , original remote,  Leads, if purchased together I’ll also include a set of balanced interconnects and an additional Bel Canto system remote that also controls Bel Canto DAC’s, pre3 plus CD players such as the CD2 or CD3t
       
      Not currently setup but can Demo to series buyers.
       
      Pickup and cash payment preferred but will ship Australia wide at buyer cost.  
       
      Would only consider splitting if it allowed for easy sale of second item. The Ref500s is still a current model and sells new for around $3500 to $4000, the Pre3 retailed for around $2700.
       
      links:
       
      http://www.belcantodesign.com/pdfs/UG_PRe3.pdf
       
      http://www.belcantodesign.com/pdfs/BCD_eOne_Manual_S500.pdf
       
      https://recordclean.com.au/bel-canto-design-e-one-ref500s-balanced-stereo-amplifier.html
       
      http://stereotimes.com/amp071307.shtml
       
      https://www.google.com/amp/s/hometheaterhifi.com/reviews/amplifier/power-amplifier/bel-canto-s500-power-amplifier/amp/
       
       

      Photos: Advertisements without photos of the actual item will not be approved.
       
       
       
       
       
       







    • By srms
      Price: $1500 Item Condition: Mint Shipping Options: Pickup available and you can audition.,Shipping is included in price. Suburb or Town: Mudgegonga State: Victoria Payment Method: PayPal or EFT Reason for selling: No longer being used Further information:  I have owned this amp for approximately 4 years and have rarely used it as I have always had too many other amps to mess with. I have just taken it out of its box and it it working really nicely.
       
      Having recently purchased an integrated amp for my work flat and I have a big Krell for home so the Halcro is not needed.
       
      As I live in NE Victoria or Alpine N.S.W (when I am at work) I can drop this off at TNT in Albury for freighting. (Freight to be paid by purchaser)  It is way too heavy for posting. I still have all the original packing (double boxed) 
       
      Here are the specs.
       
      Power Output: 400W RMS continuous into 4 Ohms
      Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W
      Unbalanced and Balanced Voltage Inputs
      Mains Voltage: 100 – 120VAC or 190 – 250VAC
      Remote trigger switch between On & Standby
      Command Functions:
      Switch between On & Standby
      Ability to inhibit individual amplifier modules
      Amplifier module will indicate Over Temperature condition
      Halcro Reliability Assurance Service
      Dimensions
      Weight: 49.8lb or 21.1 kg
      Height: 7 inches or 169mm
      Width: 17 inches or 438mm
      Depth: 16 inches or 410mm
       
      Sorry for the crappy images, just some quick pics with the phone
       
       
      Photos: Advertisements without photos of the actual item will not be approved.



    • By SoundGuy
      Item: Mark Levinson No.531H Power Amplifiers
      Location: Perth S.O.R
      Price: $12,000 $10,500 $9300 
      Item Condition: As new (10/10)
      Reason for selling: NLR and Need Money
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Bought in April this year from a European authorised dealer  to power my Usher BE-10 speakers but the ushers are so efficient they don’t benefit from a lot of power these behemoth can put out and I need money for a Japan holiday. Australian retail price for these is over $20,000; 

      Mark Levinson No. 531H Monaural Power Amplifier 

      The No 531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker. 

      The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. 

      Main Features 

      •Reliable, high-power in four different channel configurations provide ideal solutions for any system 
      •Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels 
      •Fully-differential circuitry with both balanced XLR and single-ended RCA inputs 
      •Ethernet and 12V trigger control capability for system integration 

      Inputs one balanced XLR input per channel; one unbalanced RCA input per channel 
      Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) 
      Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector 
      Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at 85dB, reference level: 2.83 Vrms 
      Input Sensitivity 2.83Vrms output at 130mVrms input 
      Gain 26.8dB 
      Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced) 
      Power Requirements 100V~, 120V~, 230V~, factory set for destination country; 
      Power Consumption 300W 
      Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) 
      Width 17.75" (45.1cm) 
      Depth 19.83" (50.4cm) 
      Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg) 
      Tags: Krell, Mcintosh, audio research, luxman, accuphase, esoteric   Photos:  
×
×
  • Create New...