Jump to content

Sign in to follow this  
Believe1980s

SOLD: FS: Pro-Ject Tube Box S Phono Preamplifier Sliver And Black Finish - Vinyl Pre-Amp

Recommended Posts

Item:  Pro-Ject Tube Box S Phono Preamplifier Sliver And Black Finish - Vinyl Pre-Amp
Location: Sutherland NSW or Roseville NSW
Price: $280
Item Condition: Mint / 99% New
Reason for selling: upgraded
Payment Method: Pickup - Cash, COD
Extra Info:

 

Pro-Ject Tube Box S Phono Preamplifier Sliver And Black Finish - Vinyl Pre-Amp.

Only open for test! Under warranty.

Pro-Ject Tube Box S Phono Preamplifier

The sonic quality of the Tube Box S is extremely impressive; a big improvement from the Phono Box S, and an audiophile upgrade for most analogue hi-fi systems. With a wide range of settings parameters, it can meet the needs of almost any phono cartridge on the market. Carefully selected audiophile-grade components make it possible to enjoy your valuable vinyl collection like never before!

The class-leading music reproduction of the Tube Box S gives pure dynamics, full transparency, analogue warmth, bass texture, detail resolution and purity for all audible frequencies.

 

Features

• Audiophile Performance

• Audiophile-grade ECC83 (12AX7)

• Dual mono configuration

• Audiophile-grade polypropylene WIMA capacitors

• Precise RIAA equalisation

• Switchable input impedance/capacitance

• 3 adjustable gain levels

• Subsonic filter

• Outstanding sound quality

 

Technical Specifications

Input impedance 10/100/1k/2k ohms(MC)/ 47k ohms (MM)

Input capacitance 50/150/270/370pF

Gain switch 41/51/61dB

Signal-to-noise ratio MM (41 dB): 84dB (94dB – IEC -A)

MC (51/61 dB): 67dB (75dB - IEC -A)

THD 0.01% MM/ 0.05% MC

RIAA deviance max. 0,4dB / 20Hz - 20kHz

Subsonic filter -12dB @ 20Hz (non switchable)

In/Out sockets 1 pair RCA connectors

Power consumption 470mA / < 1 watt in standby

Oversized power supply 18Volt DC/1000mA

Dimensions (WxHxD) 103 x 74 x 104 mm

103 x 74 x 115 mm (with sockets)

Weight 810g net 

 

Photos:

1734064260_Image_12019-07-20_15-28-21.thumb.jpeg.201e56aeecf4df2f93f7c531ad8495d9.jpeg2144546858_Image_52019-07-20_15-28-21.thumb.jpeg.147a9d64428b85fa4cbd772a0427552d.jpeg124564820_Image_72019-07-20_15-28-21.thumb.jpeg.5caa5a91d3cd656e2222abe5c3fee7ab.jpeg1694375577_Image_82019-07-20_15-28-21.thumb.jpeg.ebb2f7d293a274c8283da7ee34b39f2e.jpeg1673541290_Image_92019-07-20_15-28-21.thumb.jpeg.58b3d10350235faf3d3cec560f290aa5.jpeg784026104_Image_102019-07-20_15-28-21.thumb.jpeg.347f0fdbc66929f2ac93c21656f34569.jpeg616929440_Image_62019-07-20_15-28-21.thumb.jpeg.650b202b706fd35466f1da2e0ccea71e.jpeg404427073_Image_42019-07-20_15-28-21.thumb.jpeg.8b5e95b18517137a88b9ee1635becac1.jpeg1898441892_Image_32019-07-20_15-28-21.thumb.jpeg.7e488a0671bb26721e09428249a207b9.jpeg2011597617_Image_22019-07-20_15-28-21.thumb.jpeg.b27f851d5f0b227e3e5438df7b8237b0.jpeg

 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MattyW
      Item: Valab LCR-1 Mk2 phono stage 
      Location: Brisbane 
      Price: $700 (A new LCR-1 costs over $1,300)
      Item Condition: As new
      Reason for selling: Buying a new DAC and getting a matching phono stage from Abbas Audio in the Ukraine. Upgrades.
      Payment Method: Pickup - Cash, Paypal
      Extra Info:
       
      Local pickup only. I will not entertain posting anywhere so only queries for local pickup,  or I can drop the phono stage to a Pack & Send if you've an account.
       
      The best sounding phono stage I've been lucky enough to run. This stage is completely transparent and sounds as though it's not even in the sound chain. Not sure if you can ask for better than that, and certainly there's nothing better available at this price point.  The LCR-1 is known to compete with phono stages many times its retail price.
       
      From all reports the Mk2 is better sounding than the Mk3 though I can't imagine it would be a large difference.
       
      You can read a review of this wonderful phono stage here: 
       
      http://www.troelsgravesen.dk/LCR-RIAA-shootout.htm

      Photos:
       

       

       

       

    • By Vladas
      Item:
      MASTERSOUND INTEGRATED TUBE AMPLIFIER BOX R
      Parallel Single Ended in "Class A" Integrated - Made in Italy
       
      Power: 2 x 35 Watt
      Tubes complement: 2 x ECC802 - 6 x EL34
      Input: 3 line + Phono MM
      Output: 1 line
      Load imped.: 4-8 ohm
      Bandwidth: 18 hz / 25 khz 0 db
      Output Transformer: MastersounD
      Automatic Bias
      Supplied with remote control - R version
      Negative feedback: 0 db
      Dimensions: 43,6 x 40,9 x 18,5 cm
      Weight: 24 Kg
      Made in Italy
       

      Location:  Frankston VIC 3199
      Price:  $3000 (RRP - $5200)
      Item Condition: Brand New - still in the box
      Reason for selling: Change of financial situation
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
       
      Pure Class A  2x35 Watt PSET (Parallel Set) which is used in the very high end tube
      amplifiers like Aries Cerat $30K USD. This gives you uncompromising power to run in pure class A almost any 89+ db speakers.  Lack of power is Achilles weak spot of most tube amplifiers and I believe PSET is the best solution used by the very high end manufacturers. Legendary Mastersound brand - makes PF100 tube amplifier $50K USD. Fabulous musical EL34 tubes. To my knowledge, this model is absolutely the best value for integrated tube amplifier in that price range; made in Italy but priced similarly to comparable Chinese models. Includes very good phono pre-amplifier - same as in the flagship models.  This is Box R version with remote control (cost $330 AUD extra).
       
      Links below shows additional information about The Box and Mastersound brand in general:
      http://www.mastersoundsas.it/1/reviews_4451773.html
      https://soundapproach.com/mastersound-box-r-integrated-amplifier-class-a.html
      https://www.technologyfactory.eu/en/mastersound/integrated-amplifiers/mastersound-box/a-5384-10000401
      https://forum.audiogon.com/discussions/axpona-2018-integrated-mastersond-box

      Photos: Advertisements without photos of the actual item will not be approved.
       
       
       
       


    • By timelord9
      Item: Vincent Audio SV237. Black. 
      Location: Melbourne
      Price: 1300 dollarydoos.
      Item Condition: Excellent
      Reason for selling: Raising capital for domestic transducer development.
      Payment Method: Pickup - Cash, COD Only
      Extra Info: Purchased 2nd hand last year, this amp has seen very little use. I have the original box, but its super heavy and (at this stage) would prefer not to post. The amp is in perfect working order and buyers can demo with my Focals. Pick up from Thornbury or Abbotsford.  
       
      Specs: 
      Frequency Response: 20 Hz - 20 kHz +/- 0.5 dB, 20 Hz - 50 kHz +/-2 dB Nominal Output Power RMS / 8 Ohm: 2 x 150 Watt Nominal Output Power RMS / 4 Ohm: 2 x 250 Watt Nominal Output Power Class A / 8 Ohm: 2 x 10 Watt Harmonic Distortion: < 0.1 % (1 kHz, 1 Watt) Input Sensitivity: 300 mV Signal-Noise Ratio: > 90 dB Input Impedance: 47 kOhm Inputs: 4 x Stereo RCA, 1 USB Outputs: 1 x Stereo RCA Pre Out, 1 x Stereo RCA Rec Out, 4 x 2 Speaker Terminal, 2 x 3.5 mm Jack (Power Control) Tubes: 1 x 12AX7; 2 x 6N1P-EV Colour: Black  Weight: 20.4 kg Dimensions (WxHxD): 430 x 152 x 435 mm  
      Comes with remote. 
       
      Note: This is the original SV237. The link below is with the updated digital input.
       
      https://www.vincent-tac.de/en/product-lines/tubeline/sv-237mk.html
       
       
      Photos: 







    • By 81Vintage
      Item: Maverick Audio Tube Magic Plus DAC + Preamp
      Location: Tasmania
      Price: $180.00 inc shipping anywhere in Australia
      Item Condition: Used, Excellent
      Reason for selling: Upgrade
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Purchased recently from fellow SNA member, decided to sell off a few things and upgrade to a new high end unit.
       
      Specs here:
      https://www.mav-audio.com/base/product/d1p
       
      Still cost around $400 AUD to bring over from the states. Save a bundle.
       
      Shipping anywhere in Australia included, can drop price a little if you collect in person.

      Photos: Advertisements without photos of the actual item will not be approved.


    • By krakatana
      Item: RJM Audio VSPS Moving Magnet DIY Phono Stage
      Location: Perth
      Price: Withdrawn from sale
      Item Condition: Working perfectly, some scratches on cases
      Reason for selling: Now using MC
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Excellent sounding phono, used for six months, built about two years ago. The cases are thin Aluminium, but have brass or Titanium plates at connector points.
       
      Materials used: RJM VSPS and Dual-Bridge Rectifier kits, Dueland wiring for signal paths, Arizona Blue Cactus 2.2uF 200VDC output capacitors (with bypass caps), Altronics transformer, Furutech Rhodium FI-03 IEC inlet with fuse, 2 x Aluminium cases, Stillpoint ERS tape around power cable (light blue) in phono case, Gold coated pure Copper RCA plugs, 2 cm slate pieces under circuit boards and transformer, brass (front) and Titanium plates (rear). Well over $200 of materials used.
       
      http://phonoclone.com/diy-pho5.html
      http://phonoclone.com/pcb.html
      http://phonoclone.com/diy-guide.html
       
      ELECTRICAL DISCLAIMER
      This product has not been manufactured by a qualified individual or company, therefore contains electrical circuits that do not necessarily comply with Australian Standards. I understand that as the seller, I may be liable to repercussions in the event of equipment failure. By advertising and selling this product, as the seller I also agree that I am solely liable, and the publisher of this website takes no responsibility for any injury or death resulting from, whether directly or indirectly, any accident that may happen as a result of the failure of the product being sold. If in doubt, seek the services of a qualified electrician to inspect the product to ensure it is safe for use.

      Photos: Advertisements without photos of the actual item will not be approved.




×
×
  • Create New...