WayneG Posted December 14, 2019 Share Posted December 14, 2019 Hey guys so here’s my problem I got a nice 5.1 klipsch setup in my theatre room but instead of adding a new sub I have purchased a JL Audio 10w6v2 in the process of searching for a second one I just need some help choosing a pre amp to power both subs & how I would go about wiring them all up I have a onkyo TXNR515 7.2 receiver goes hard but I just want that extra bass help me guys I know there is so much experience out here already. Cheers Wayne Link to comment Share on other sites More sharing options...
JohnL Posted December 15, 2019 Share Posted December 15, 2019 (edited) Isn't the JL Audio Model you mention just a 10" car sub driver on it's own? I would definitely recommend just buying 2 complete good quality powered HT Subs. They would both simply connect to the 2 parallel RCA Sub preout's offered by your Onkyo AVR. If $$ are a concern start with one. As long as it's decent quality you may find that it's enough anyway. Lastly......if your room is pretty big a 12 " or even 15" ( my friend has 2 x 18" in his BIG room!!!!) may be necessary to give you what you are looking for. Edited December 15, 2019 by JohnL Link to comment Share on other sites More sharing options...
WayneG Posted December 15, 2019 Author Share Posted December 15, 2019 Hey man thanks for the input but I already have a 10” klipsch powered sub but I just want more bass & I figure the twin 10w6’s with 200-600w RMS will shake my house good just gotta figure out what pre amp I would need & how to basically wire it up. Link to comment Share on other sites More sharing options...
Recommended Posts