Jump to content

Sign in to follow this  
Digital Cinema

FS:Bowers & Wilkins CM9 S2 Floorstanding Speakers Pair Black BRAND NEW

Recommended Posts

Item: Bowers & Wilkins CM9 S2 Floorstanding Speakers Pair
Location: https://www.digitalcinema.com.au/bowers-wilkins-cm9-s2-floorstanding-speakers-pair.html
Price: $2400 plus Del
Item Condition:
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:https://www.digitalcinema.com.au/bowers-wilkins-cm9-s2-floorstanding-speakers-pair.html

Share this post


Link to post
Share on other sites

I notice you have a pair of refurb rosenut on your website.....

Share this post


Link to post
Share on other sites
16 hours ago, swervyn said:

I notice you have a pair of refurb rosenut on your website.....

yes...?

Share this post


Link to post
Share on other sites
On 10/12/2019 at 10:22 AM, Digital Cinema said:

yes...?

Same price?

Share this post


Link to post
Share on other sites


What would be the delivery charges for B&W CM9 S2 (Black) to VIC 3133 ?

 

Cheers.

Share this post


Link to post
Share on other sites
7 minutes ago, NADbooffa said:

What would be the delivery charges for B&W CM9 S2 (Black) to VIC 3133 ?

 

Cheers.

A big fat $0

Share this post


Link to post
Share on other sites
On 11/12/2019 at 11:38 AM, Digital Cinema said:

Name a (reasonable) price and it is yours

oooh, a challenge 😂

 

Been searching for 683s2 in red cherry for a while but spotted this, happy to pay same price as the black plus $100 delivery to TAS, subject to reason for refurb listing

Share this post


Link to post
Share on other sites


Hi 

16 hours ago, swervyn said:

oooh, a challenge 😂

 

Been searching for 683s2 in red cherry for a while but spotted this, happy to pay same price as the black plus $100 delivery to TAS, subject to reason for refurb listing

 

Just had the warehouse guys check both speakers and they both look brand new with no visible scratches.  There was no reason stated as to why it was refurb, I suspect it was an open box and not a refurb as the condition is 9.5/10 

Share this post


Link to post
Share on other sites

Rosenut SOLD 

 

one pair of  black brand new left

Edited by Digital Cinema

Share this post


Link to post
Share on other sites
17 hours ago, swervyn said:

oooh, a challenge 😂

 

Been searching for 683s2 in red cherry for a while but spotted this, happy to pay same price as the black plus $100 delivery to TAS, subject to reason for refurb listing

any interest in these?

 

https://www.digitalcinema.com.au/jbl-studio-570-floorstanding-loudspeaker-pair.html

 

 

Share this post


Link to post
Share on other sites


5 hours ago, Digital Cinema said:

Rosenut SOLD 

 

one pair of  black brand new left

Ummm, am i missing something here? Or are you listing them as sold to me??

Share this post


Link to post
Share on other sites
2 minutes ago, swervyn said:

Ummm, am i missing something here? Or are you listing them as sold to me??

No, someone else has purchased them

Share this post


Link to post
Share on other sites
4 hours ago, Digital Cinema said:

No, someone else has purchased them

Well that’s a shame for the guy that you could say was in negotiations for the rosenut pair.

Share this post


Link to post
Share on other sites
1 hour ago, Hi-Fi Whipped said:

Well that’s a shame for the guy that you could say was in negotiations for the rosenut pair.

It’s probably list online shopping system anyone can click and buy...

Share this post


Link to post
Share on other sites


16 hours ago, Digital Cinema said:

No, someone else has purchased them

Wonderful.....glad I bought them to someone elses attention.....

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AudioTrends
      Item: Quad II-Eighty Power Amplifier - 80 Watt Mono Valve Power Amplifiers (Pair)
      Location: Ringwood
      Price: $9,500 was $14,999
      Item Condition: Demonstration Model
      Reason for selling: It is the last model and needs to be moved.
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
      The Quad II-Eighty Mono Valve Power Amplifiers are some of the most richly rewarding audio components you will ever lay ears on. From the company that bought you the electrostatic speaker, Quad continues it's tradition of 'The Closest Approach To The Original Sound'.
       
      The range topper of the Quad Valve power amplifier series is the Quad II-Eighty amplifier. The perfect partner to Quad’s electrostatic speakers, the II-Eighty is not merely a nod in the direction of retro styling, it’s a modern high-performance amplifier designed by one of the most famous tube-amplifier designers in the world using more than a little inspiration from the original Quad II amplifier.
      The new Quad II Series circuit design is the work of Tim de Paravicini, a man widely acknowledged to be the UK's foremost valve amp designer. His design is faithful to Peter Walker's philosophy of cathode loading onto the same output stage and fundamental simplicity of design, ensuring the new amp delivers the same wealth of detail and exquisite tone as its famous predecessor.
       
      The Quad ll-Eighty is an 80 watt mono power amplifier following in the tradition and philosophies of Quad founder, Peter Walker. The output section consists of four KT88 valves running as two pairs in push pull with the hallmark Quad topology of partial cathode loading in the output transformer.
      This method reduces distortion when compared to the usual Ultra Linear or triode methods, however, it does require a greater grid driving voltage. This is achieved, again in true Quad fashion, using a balanced pair input stage.
      The output transformer has been designed to improve high frequency performance and accurately balance the two push pull halves. Also the transformer has been designed to make sure that full output is realised at the bass frequencies down to 20Hz.
      Each output valve has its own cathode resistors to provide reliability and self-matching. The screen grids of the KT88 valves are run from a lower voltage, again for good reliability. The whole amplifier has a total of only 16 dB of feed-back providing good stability into virtually any known loudspeaker and especially the famed Quad electrostatic loudspeakers.
      Features:
      Design: Mono Valve Power Amplifier Input Sensitivity (nominal): 1V RMS for full output Power Output: 80W RMS Output Impedance: 4 Ohms or 8 Ohms, selectable THD @ 80 Watts: 0.5% - 30Hz - 15kHz 1.0% - 20 - 20kHz Residual Hum and Noise: Better than -94dB Frequency Response: 10Hz - 30kHz (+0dB, -0.5dB) 3Hz - 50kHz (-3dB) Damping Factor: 16 @ 1kHz (referred to 8 Ohms) Power Consumption: 180VA maximum Valves: 2 x 6SL7 1 x 6SN7 4 x KT88 Size (WxHxD): 430 x 220 x 190mm each Weight: 20.3kg each Finish: Lancaster Grey Manufacturer's Warranty: 2 Years  
      Photos: Advertisements without photos of the actual item will not be approved.






    • By AudioTrends
      Item: Quad II-Eighty Power Amplifier - 80 Watt Mono Valve Power Amplifiers (Pair)
      Location: Ringwood
      Price: $9,500 was $14,999
      Item Condition: Demonstration Model
      Reason for selling: It is the last model and needs to be moved.
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
      The Quad II-Eighty Mono Valve Power Amplifiers are some of the most richly rewarding audio components you will ever lay ears on. From the company that bought you the electrostatic speaker, Quad continues it's tradition of 'The Closest Approach To The Original Sound'.
       
      The range topper of the Quad Valve power amplifier series is the Quad II-Eighty amplifier. The perfect partner to Quad’s electrostatic speakers, the II-Eighty is not merely a nod in the direction of retro styling, it’s a modern high-performance amplifier designed by one of the most famous tube-amplifier designers in the world using more than a little inspiration from the original Quad II amplifier.
      The new Quad II Series circuit design is the work of Tim de Paravicini, a man widely acknowledged to be the UK's foremost valve amp designer. His design is faithful to Peter Walker's philosophy of cathode loading onto the same output stage and fundamental simplicity of design, ensuring the new amp delivers the same wealth of detail and exquisite tone as its famous predecessor.
       
      The Quad ll-Eighty is an 80 watt mono power amplifier following in the tradition and philosophies of Quad founder, Peter Walker. The output section consists of four KT88 valves running as two pairs in push pull with the hallmark Quad topology of partial cathode loading in the output transformer.
      This method reduces distortion when compared to the usual Ultra Linear or triode methods, however, it does require a greater grid driving voltage. This is achieved, again in true Quad fashion, using a balanced pair input stage.
      The output transformer has been designed to improve high frequency performance and accurately balance the two push pull halves. Also the transformer has been designed to make sure that full output is realised at the bass frequencies down to 20Hz.
      Each output valve has its own cathode resistors to provide reliability and self-matching. The screen grids of the KT88 valves are run from a lower voltage, again for good reliability. The whole amplifier has a total of only 16 dB of feed-back providing good stability into virtually any known loudspeaker and especially the famed Quad electrostatic loudspeakers.
      Features:
      Design: Mono Valve Power Amplifier Input Sensitivity (nominal): 1V RMS for full output Power Output: 80W RMS Output Impedance: 4 Ohms or 8 Ohms, selectable THD @ 80 Watts: 0.5% - 30Hz - 15kHz 1.0% - 20 - 20kHz Residual Hum and Noise: Better than -94dB Frequency Response: 10Hz - 30kHz (+0dB, -0.5dB) 3Hz - 50kHz (-3dB) Damping Factor: 16 @ 1kHz (referred to 8 Ohms) Power Consumption: 180VA maximum Valves: 2 x 6SL7 1 x 6SN7 4 x KT88 Size (WxHxD): 430 x 220 x 190mm each Weight: 20.3kg each Finish: Lancaster Grey Manufacturer's Warranty: 2 Years  
      Photos: Advertisements without photos of the actual item will not be approved.






    • By Muzza71
      Item:  Tauris Georgia HiFi Stand 4 Tier Shelf Tempered Glass 
      Location: Perth
      Price: $100
      Item Condition: Very Good
      Reason for selling: NLR 
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Some light swirl marks and scratches but nothing to obvious.
       
      750mm Height 650 Depth 500mm Wide
       
      470mm between inside posts
      450mm deep to rear frame.
       
      245mm bottom shelf height
      200mm middle shelf height 
      210mm top shelf height 
       
      Shelves be can interchanged.
       
      The rear frame has been opened up to accommodate different terminal positions on amplifiers and source components on 2 shelves.
       
      The bottom shelf has 6mm rubber sandwiched between two perspex glass plates to assist with sound absorbsion/isolation.
       
      Bottom shelf weight limit 45kg, other shelves 25kg. 
       
       
       





       
    • By Muzza71
      Item: Speaker Stands 735mm High - Tempered Glass
      Location: Perth
      Price: $50 
      Item Condition: Very Good
      Reason for selling: NLR
      Payment Method: Pickup - Cash, 
      Extra Info:
      Some light swirl marks and scratches but nothing to obvious.
      These can be filled with your preferred sound deadener/Absorber.
      735mm high including spikes, perfect for smallerish bookshelves around 300mm in height 
      Top plate D 180mm x W 150mm x 8mm thick
      Bottom plate D 300mm x W 220mm x 8mm thick
       
       

       
    • By bdavis84
      Item: KRIX Phoenix Floorstanding Speakers
      Location: East Melbourne
      Price: $600
      Item Condition: Like New
      Reason for selling: Downscaling
      Payment Method: Pickup - Cash, COD Only
      Extra Info: 2 small holes in one of the speaker mesh. Otherwise great condition. Barely used over the past 7 years. Also includes quad braided speaker wire valued at $25 pm.
       
      Photos: Advertisements without photos of the actual item will not be approved.



×
×
  • Create New...