Jump to content

Sign in to follow this  
Max Headroom

SOLD: FS: NAD C 275BEE Stereo Power Amplifier

Recommended Posts

Item: NAD C 275BEE Stereo Power Amplifier - does not include Integrated in picture, see my other sale
Location: Williamstown VIC 3016
Price: $600
Item Condition: Perfect
Reason for selling: Looking at upgrading to NAD Master Series
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info: This stereo amplifier is a proverbial iron fist in a velvet glove. 

 

If you can never have enough power, match this brilliant power amp with the matching integrated, and switch them both to bridged mode, sit back and revel in the awesome scale and control that this amp has. This amp has performance that simply must be heard to be fully appreciated.

 

This integrated has lots of trickle down technology from the NAD Masters Series M3 Amplifier. These include application of Bjørn Erik Edvardsen’s Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply, with distortion and noise reduced down to unprecedented levels. 

 

The C275BEE is the same Power Amplifier circuitry as used in the C375BEE Integrated Stereo Amplifier and can be connected to form a truly prodigious combination. As a two-channel amplifier, the possibilities are numerous. Experience room-filling sound with impressive musical detail and transparency. The NAD C275BEE features a sophisticated design and beefy construction to bring out the best in all your music from the lowest, wall-shaking pedal notes of a pipe organ to the delicate reverberation of a solo acoustic guitar.

 

What HiFi loved this amp: "If you're looking for a powerful but subtle amplifier, then the NAD C275BEE power amp, paired with the matching C165BEE preamp does the trick"... "A likeable brute of an amplifier. For those who want plenty of sonic muscle without having to sacrifice subtlety too much.

 

https://nadelectronics.com/product/c-275bee-stereo-power-amplifier/

 

This amp will drive just about any load down to 2ohm, and can hit 800w at 8ohm in bridged mode.

 

2 x 150W Continuous Power into 4 Ohms and 8 Ohms

250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 Ohms, respectively

PowerDrive™ circuit

Holmgren Toroidal Power transformer

All discrete circuitry

Class A Voltage Stages

Distortion Canceling Circuit

BEE Anti-saturation Clamp

Copper bus bars

Short signal path from input to output

All sockets Gold-plated

Soft Clipping™

 

This amp has run beautifully without a hitch, and works incredible well with the matching C 375BEE integrated that I'm selling - the power amp in the integrated is meant to be the same as this standalone power amp. 

 

I have a box that I received the amp in, so it will be packed well, but I don't have the original packaging.

 
Photos: Advertisements without photos of the actual item will not be approved.

Nad-front.jpg

Nad-rear.jpg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dbuns
      Item Condition: 10/10 Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition. Suburb or Town: Kambah State: Australian Capital Territory Payment Method: EFT, Cash on Pickup Reason for selling: Upgraded NLR Further information: 
       
      It was purchased December 2018, so it is a little over a year old now. Still plenty of Warranty left on it. Has not had much use it was driving 4 ATMOS speakers. Upgraded my receiver so no longer require the power amp.
       
      It is in perfect condition, coming from a smoke free home. No scratches or dents to be seen.
       
      Comes with all original paperwork.
       
      Unfortunately a demo is not available in the current virus circumstances. I can however provide a video of fully functioning amp.
       
      The CI 940 has 4 channels of clean low distortion power set up in a 2 stereo zone configuration. Boasting 35 watts of continuous power per channel, the CI 940 is designed to drive low impedance speakers and long wire runs. Vanishingly low distortion and near absence of noise allow the music to emerge from a ‘black’ background that enhances stereo perspective and allows the subtle details of the music to be heard clearly.
       
       
      Four channels of clean, low distortion power set up in two stereo zone configuration 35W x 4 @ 8 Ohms/4 Ohms 70W x 2 @ 8 Ohms in Bridge Mode Photos: Advertisements without photos of the actual item will not be approved.
    • By Niraj.shr
      Item: Budget CD Player in good working order
      Price Range: 150 - 350
      Item Condition: Used
      Extra Info: Looking for a good condition used CD player from reputable brands - NAD, Rotel, Marantz, Denon etc. Currently using a cheap Sony cd player model CDP-397 and looking to upgrade to a better player. Bought a 5 disc sony player recently and had to get rid of it as it produced a loud hum.
      I am in Perth (6060) Thank you.
       
       
    • By glennb
      Item Condition: Very Good Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition. Suburb or Town: Essendon State: Victoria Payment Method: EFT, Cash on Pickup Reason for selling: NLR Further information:  Last of the HT room clear out is the NAD T175 HD surround processor which I've owned since new (RRP of $4,000 at the time). Full working order and has been the reliable centre piece of the HT room for many years. Comes with brand new HTR 8 learning remote control, audyssey Mic and power cable.
       
      Only known issue is that is has some crackling and popping and odd volume output when using the volume knob on the front (typical of a lot of NAD gear apparently). Using the remote volume control though it's fine. 
       
      This model (and serial number) is suitable for the VM300 4k passthrough MDC upgrade as well as the AM230 for Dolby Atmos 11.2 outputs if you wanted to create a 4K Atmos NAD surround processor for a bargain price!
       
      Features:
      Dolby TrueHD and DTS-HD Master Audio decoding and Sigma Designs advanced VXP video processing
      7.2 Channel output (2 sub outs)
      Audyssey MultiEQ XT room correction
      Dynamic Volume and Dynamic EQ
      4 HDMI Inputs, 1 HDMI Out (HDMI 1.3)

      Photos: 





    • By thecoffeegent
      Hey guy's,
       
      I need some help. I recently picked up a NAD T758 v3 receiver and set aside today to do the Dirac Live room correction. After hours i still cannot get a measurement it will use.
      I'm using the supplied mic on tripod stand and have tried it plugged into the T758 (as suggested by NAD) and also via my PC. 
       
      The issue:
      Every time i run a measurement point (Test tones from each speaker), at the end i get a Low Signal to Noise ratio error message, regardless of which point i'm measuring and what volume everything is set at etc (I've tried almost all volume options!). The rooms quiet. no other appliances are running except the amp and my PC. I also leave the room during the measurement. 
       
      The one time i was able to get enough measurement points successfully recorded, it failed during the filter design stage with an error saying the measurements were too poor quality.
       
      I've tried another calibration microphone (KRKSystems) with the exact same results as above.
       
      I've also tried it through the iOS app. Again, same issues.
       
      Has anyone else experienced this or have some suggestions?
       
      Thanks.
    • By Dbuns
      Item Condition: 10/10 Shipping Options: Pickup available but audition is not available.,Pickup available and you can audition.,Shipping is included in price. Suburb or Town: Canberra State: Australian Capital Territory Payment Method: Cash on Pickup Reason for selling: Upgrade so NLR Further information:  
      The CI 940 has 4 channels of clean low distortion power set up in a 2 stereo zone configuration. Boasting 35 watts of continuous power per channel, the CI 940 is designed to drive low impedance speakers and long wire runs. Vanishingly low distortion and near absence of noise allow the music to emerge from a ‘black’ background that enhances stereo perspective and allows the subtle details of the music to be heard clearly.
       
       
      Four channels of clean, low distortion power set up in two stereo zone configuration 35W x 4 @ 8 Ohms/4 Ohms 70W x 2 @ 8 Ohms in Bridge Mode  
      It was purchased December 2018, so it is a little over a year old now. Still plenty of Warranty left on it. Has not had much use it was driving 4 ATMOS speakers. Upgraded so no longer require the power amp.
       
      It is in perfect condition, coming from a smoke free home. No scratches or dents to be seen.
       
      Comes with remote and all original paperwork.
       
      Unfortunately a demo is not available in the current virus circumstances. I can however provide a video of fully functioning amp.
       

      Photos: Advertisements without photos of the actual item will not be approved.
×
×
  • Create New...