Murray Hodges Posted October 13, 2019 Share Posted October 13, 2019 Item: Morel 3 Way Large Stand Mount DIY Loudspeaker System Location: Perth Price: $1500 Item Condition: Very Good Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: The system offered comprises of 2 large 3 way bi-wired stand mount speakers in a curved Cherry 21 litre cabinet. Also included is a Dual 31 band Graphic Equaliser and an Omnimic V2 Acoustic Measurement System & 2 sets of 700mm stands. To ensure a flat frequency response is achieved I have implemented a 31 band analogue graphic equaliser and Dayton Audio Omnimic V2 Acoustic Measurement System which runs sweeps from either a cd player or thumb drive. To achieve a flat frequency response, adjustments need to be made to the 31 band graphic equaliser in real time whilst running sweeps from the Omnimic measurement tool. These speakers will sound as good as speakers 3 x my asking price. I have Bryston Mini T 3 way Stand Mounts at RRP $6000.00 to demo against. I have attached photos of Frequency Response graphs taken 1 metre away from the speakers before and after applying EQ (In room response). Below is a breakdown of system component list and parts purchase prices including delivery in $AUD: 2 x Dayton Audio MTMC-0.75CH 21l MTM Curved Cabinet Cherry = $469.00 4 x Morel TiW 634FT Titanium Series Ferrite 6” Woofer 4 Ohm = $900.00 2 x Morel TM4055-8 2" Midrange and 1-1/8" Tweeter Speaker Plate = $520.00 4 x Dayton Audio BPP-SN Premium Binding Post Jack Pair = $110.00 2 x Dayton 800-HPF-8 High Pass Crossover 800 Hz 12 dB/Octave = $ 34.00 2 x Dayton 800-LPF-8 Low Pass Crossover 800 Hz 12 dB/Octave = $ 54.00 2 x Dayton 3.5k-LPF-8 Low Pass Crossover 3,500 Hz 12 dB/Octave = $ 22.00 2 x Dayton 3.5k-HPF-8 High Pass Crossover 3,500 Hz 12 dB/Octave = $ 22.00 31 Band Graphic Equaliser = $355.00 Dayton Audio Omnimic V2 Acoustic measurement System = $389.00 2 x pairs of Stand Mount Speaker Stands 1 x wood 1 x steel/Glass = $275.00 Baffle driver holes cut out by professional = $100.00 TOTAL $3205.00 The speakers are 8 ohm, the 2 Morel 6” 4 0hm woofers are wired in series equalling 8 ohms. The Woofers crossover at 800hz to the midrange, then the midrange crosses over to the tweeter at 3500hz. Internal speaker wiring Van Den Hull Clearwater. Internal cabinet walls are lined with Response combination Butyl/foam super sound deadener. Magnetic Grilles. Cabinets are very sturdy with a thud response when knocked on. Both speaker stands can be filled with sand/filling. Speaker Dimensions = H 508mm W 215mm D 342mm Each speaker weighs = 14.5kg Local buyers only at this stage, however if there is no local interest I can ship interstate in 3 separate boxes, speaker stands will not be shipped therefore local buyers consider the speaker stands as a freebie. I will help setup for local buyers. Photos: Advertisements without photos of the actual item will not be approved. Photos: Advertisements without photos of the actual item will not be approved. 3 Link to comment Share on other sites More sharing options...
needlerunner Posted October 13, 2019 Share Posted October 13, 2019 2 hours ago, Muzza71 said: Item: Morel 3 Way Large Stand Mount DIY Loudspeaker System Location: Perth Price: $1500 Item Condition: Very Good Reason for selling: NLR Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: The system offered comprises of 2 large 3 way bi-wired stand mount speakers in a curved Cherry 21 litre cabinet. Also included is a Dual 31 band Graphic Equaliser and an Omnimic V2 Acoustic Measurement System & 2 sets of 700mm stands. To ensure a flat frequency response is achieved I have implemented a 31 band analogue graphic equaliser and Dayton Audio Omnimic V2 Acoustic Measurement System which runs sweeps from either a cd player or thumb drive. To achieve a flat frequency response, adjustments need to be made to the 31 band graphic equaliser in real time whilst running sweeps from the Omnimic measurement tool. These speakers will sound as good as speakers 3 x my asking price. I have Bryston Mini T 3 way Stand Mounts at RRP $6000.00 to demo against. I have attached photos of Frequency Response graphs taken 1 metre away from the speakers before and after applying EQ (In room response). Below is a breakdown of system component list and parts purchase prices including delivery in $AUD: 2 x Dayton Audio MTMC-0.75CH 21l MTM Curved Cabinet Cherry = $469.00 4 x Morel TiW 634FT Titanium Series Ferrite 6” Woofer 4 Ohm = $900.00 2 x Morel TM4055-8 2" Midrange and 1-1/8" Tweeter Speaker Plate = $520.00 4 x Dayton Audio BPP-SN Premium Binding Post Jack Pair = $110.00 2 x Dayton 800-HPF-8 High Pass Crossover 800 Hz 12 dB/Octave = $ 34.00 2 x Dayton 800-LPF-8 Low Pass Crossover 800 Hz 12 dB/Octave = $ 54.00 2 x Dayton 3.5k-LPF-8 Low Pass Crossover 3,500 Hz 12 dB/Octave = $ 22.00 2 x Dayton 3.5k-HPF-8 High Pass Crossover 3,500 Hz 12 dB/Octave = $ 22.00 31 Band Graphic Equaliser = $355.00 Dayton Audio Omnimic V2 Acoustic measurement System = $389.00 2 x pairs of Stand Mount Speaker Stands 1 x wood 1 x steel/Glass = $275.00 Baffle driver holes cut out by professional = $100.00 TOTAL $3205.00 The speakers are 8 ohm, the 2 Morel 6” 4 0hm woofers are wired in series equalling 8 ohms. The Woofers crossover at 800hz to the midrange, then the midrange crosses over to the tweeter at 3500hz. Internal speaker wiring Van Den Hull Clearwater. Internal cabinet walls are lined with Response combination Butyl/foam super sound deadener. Magnetic Grilles. Cabinets are very sturdy with a thud response when knocked on. Both speaker stands can be filled with sand/filling. Speaker Dimensions = H 508mm W 215mm D 342mm Each speaker weighs = 14.5kg Local buyers only at this stage, however if there is no local interest I can ship interstate in 3 separate boxes, speaker stands will not be shipped therefore local buyers consider the speaker stands as a freebie. I will help setup for local buyers. Photos: Advertisements without photos of the actual item will not be approved. Photos: Advertisements without photos of the actual item will not be approved. Bloody travesty muz. They are worth this and more. If l was in the market l would snap these up. They are a steal. Can't believe they haven't been snaffled up. 1 Link to comment Share on other sites More sharing options...
zippi Posted October 13, 2019 Share Posted October 13, 2019 I'm not usually the one for the 3-ways configs, however these speakers so look the part, plus backed up with a clear freq resp evidence. If I was in a position - wouldn't think twice. GLWTS. 1 Link to comment Share on other sites More sharing options...
Recommended Posts