Jump to content

Sign in to follow this  
Muzza71

Price Drop Morel 3 Way Large Stand Mount DIY Loudspeaker System

Recommended Posts

Item: Morel 3 Way Large Stand Mount DIY Loudspeaker System 

Location: Perth
Price: $1500
Item Condition: Very Good
Reason for selling: NLR
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:

 

The system offered comprises of 2 large 3 way bi-wired stand mount speakers in a curved Cherry 21 litre cabinet. Also included is a Dual 31 band Graphic Equaliser and an Omnimic V2 Acoustic Measurement System & 2 sets of 700mm stands.

 

To ensure a flat frequency response is achieved I have implemented a 31 band analogue graphic equaliser and Dayton Audio Omnimic V2 Acoustic Measurement System which runs sweeps from either a cd player or thumb drive. To achieve a flat frequency response, adjustments need to be made to the 31 band graphic equaliser in real time whilst running sweeps from the Omnimic measurement tool.

 

These speakers will sound as good as speakers 3 x my asking price.

 

I have Bryston Mini T 3 way Stand Mounts at RRP $6000.00  to demo against.

 

I have attached photos of Frequency Response graphs taken 1 metre away from the speakers before and after applying EQ (In room response).  

 

Below is a breakdown of system component list and parts purchase prices including delivery in $AUD:

 

2 x Dayton Audio MTMC-0.75CH 21l MTM Curved Cabinet Cherry                = $469.00

 

4 x Morel TiW 634FT Titanium Series Ferrite 6” Woofer 4 Ohm                    = $900.00

2 x Morel TM4055-8 2" Midrange and 1-1/8" Tweeter Speaker Plate             = $520.00

4 x Dayton Audio BPP-SN Premium Binding Post Jack Pair                          = $110.00

2 x Dayton 800-HPF-8 High Pass Crossover 800 Hz 12 dB/Octave               =  $ 34.00

2 x Dayton  800-LPF-8 Low Pass Crossover 800 Hz 12 dB/Octave               =  $ 54.00

2 x Dayton 3.5k-LPF-8 Low Pass Crossover 3,500 Hz 12 dB/Octave              =  $ 22.00

2 x Dayton 3.5k-HPF-8 High Pass Crossover 3,500 Hz 12 dB/Octave           =  $ 22.00

 31 Band Graphic Equaliser                                                                                    = $355.00

Dayton Audio Omnimic V2 Acoustic measurement System                         = $389.00

2 x pairs of Stand Mount Speaker Stands 1 x wood 1 x steel/Glass               = $275.00

Baffle driver holes cut out by professional                                                        = $100.00

                                                                                                                     TOTAL      $3205.00

 

The speakers are 8 ohm, the 2 Morel 6” 4 0hm woofers are wired in series equalling 8 ohms.

The Woofers crossover at 800hz to the midrange, then the midrange crosses over to the tweeter at 3500hz.

Internal speaker wiring Van Den Hull Clearwater.

Internal cabinet walls are lined with Response combination  Butyl/foam super sound deadener.

Magnetic Grilles.

Cabinets are very sturdy with a thud response when knocked on.

Both speaker stands can be filled with sand/filling.

Speaker Dimensions = H 508mm W 215mm D 342mm

Each speaker weighs = 14.5kg

 

 Local buyers only at this stage, however if there is no local interest I can ship interstate in 3 separate boxes, speaker stands will not be shipped therefore local buyers consider the speaker stands as a freebie.

I will help setup for local buyers.

 
Photos: Advertisements without photos of the actual item will not be approved.

Morel Speakers 1.jpg

Morel Speakers 2.jpg

Morel Drivers.jpg

Cabinet Side 1.jpg

Cabinet Side 2.jpg

Cabinet Top 1.jpg

Cabinet Rear 1.jpg

Cabinet Internals.jpg

Omnimic V2.jpg

31 Band Graphic Equalizer.jpg

700mm Stands.jpg

Left Channel Frequency Response 1 metre.png

Left Channel Frequency Response 1 Metre with EQ.png

Right Channel Frequency Response 1 metre.jpg

Right Channel Frequency Response 1 metre with EQ (1).png

 

 
Photos: Advertisements without photos of the actual item will not be approved.

Share this post


Link to post
Share on other sites
2 hours ago, Muzza71 said:

Item: Morel 3 Way Large Stand Mount DIY Loudspeaker System 

Location: Perth
Price: $1500
Item Condition: Very Good
Reason for selling: NLR
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:

 

The system offered comprises of 2 large 3 way bi-wired stand mount speakers in a curved Cherry 21 litre cabinet. Also included is a Dual 31 band Graphic Equaliser and an Omnimic V2 Acoustic Measurement System & 2 sets of 700mm stands.

 

To ensure a flat frequency response is achieved I have implemented a 31 band analogue graphic equaliser and Dayton Audio Omnimic V2 Acoustic Measurement System which runs sweeps from either a cd player or thumb drive. To achieve a flat frequency response, adjustments need to be made to the 31 band graphic equaliser in real time whilst running sweeps from the Omnimic measurement tool.

 

These speakers will sound as good as speakers 3 x my asking price.

 

I have Bryston Mini T 3 way Stand Mounts at RRP $6000.00  to demo against.

 

I have attached photos of Frequency Response graphs taken 1 metre away from the speakers before and after applying EQ (In room response).  

 

Below is a breakdown of system component list and parts purchase prices including delivery in $AUD:

 

2 x Dayton Audio MTMC-0.75CH 21l MTM Curved Cabinet Cherry                = $469.00

 

4 x Morel TiW 634FT Titanium Series Ferrite 6” Woofer 4 Ohm                    = $900.00

2 x Morel TM4055-8 2" Midrange and 1-1/8" Tweeter Speaker Plate             = $520.00

4 x Dayton Audio BPP-SN Premium Binding Post Jack Pair                          = $110.00

2 x Dayton 800-HPF-8 High Pass Crossover 800 Hz 12 dB/Octave               =  $ 34.00

2 x Dayton  800-LPF-8 Low Pass Crossover 800 Hz 12 dB/Octave               =  $ 54.00

2 x Dayton 3.5k-LPF-8 Low Pass Crossover 3,500 Hz 12 dB/Octave              =  $ 22.00

2 x Dayton 3.5k-HPF-8 High Pass Crossover 3,500 Hz 12 dB/Octave           =  $ 22.00

 31 Band Graphic Equaliser                                                                                    = $355.00

Dayton Audio Omnimic V2 Acoustic measurement System                         = $389.00

2 x pairs of Stand Mount Speaker Stands 1 x wood 1 x steel/Glass               = $275.00

Baffle driver holes cut out by professional                                                        = $100.00

                                                                                                                     TOTAL      $3205.00

 

The speakers are 8 ohm, the 2 Morel 6” 4 0hm woofers are wired in series equalling 8 ohms.

The Woofers crossover at 800hz to the midrange, then the midrange crosses over to the tweeter at 3500hz.

Internal speaker wiring Van Den Hull Clearwater.

Internal cabinet walls are lined with Response combination  Butyl/foam super sound deadener.

Magnetic Grilles.

Cabinets are very sturdy with a thud response when knocked on.

Both speaker stands can be filled with sand/filling.

Speaker Dimensions = H 508mm W 215mm D 342mm

Each speaker weighs = 14.5kg

 

 Local buyers only at this stage, however if there is no local interest I can ship interstate in 3 separate boxes, speaker stands will not be shipped therefore local buyers consider the speaker stands as a freebie.

I will help setup for local buyers.

 
Photos: Advertisements without photos of the actual item will not be approved.

Morel Speakers 1.jpg

Morel Speakers 2.jpg

Morel Drivers.jpg

Cabinet Side 1.jpg

Cabinet Side 2.jpg

Cabinet Top 1.jpg

Cabinet Rear 1.jpg

Cabinet Internals.jpg

Omnimic V2.jpg

31 Band Graphic Equalizer.jpg

700mm Stands.jpg

Left Channel Frequency Response 1 metre.png

Left Channel Frequency Response 1 Metre with EQ.png

Right Channel Frequency Response 1 metre.jpg

Right Channel Frequency Response 1 metre with EQ (1).png

 

 
Photos: Advertisements without photos of the actual item will not be approved.

Bloody travesty muz. They are worth this and more. If l was in the market l would snap these up. They are a steal. Can't believe they haven't been snaffled up.

Share this post


Link to post
Share on other sites

I'm not usually the one for the 3-ways configs, however these speakers so look the part, plus backed up with a clear freq resp evidence. If I was in a position - wouldn't think twice. GLWTS.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By missmurphy
      Item: behemoth Japanese CD player
      Location: Cronulla 
      Price: 1000
      Item Condition: good for age
      Reason for selling: raising cash
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: this is as good as it gets for a one box solution, I have not had it up against an esoteric or an amr, but it has smashed a marantz CD 94, cd11 and a multibit pioneer elite
      i was using it for ages , works flawlessly, I’m sure with a few upgrades here and there it could be even better, don’t forget it is getting on
      check the build, volume control is stepped relay using Seiden resistors, it has a massive twin transformer power supply , and 19 seperate regulators, heaps of copper foil styros and what look like early cerafines 
      the whole thing is plate alloy sheet
      22 kg of beast , lid has a few marks and scrapes, but presents well
      local pick up only
      240 volt one of only four in ausAus
       
      Photos: Advertisements without photos of the actual item will not be approved.







    • By MAXXX
      Item: Yarland Ariand 845, tube integrated/power amplifier
      Location: Perth (Kardinya)
      Price: $2000 ono
      Item Condition: Excellent , with remote and original package
      Reason for selling: Too many amps
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Yarlands  top of the range tube integrated/power amplifier.
       
      Purchased from Magenta Audio app. 2 years ago.
       
      Real dual mono design ( incl. separate power switch for each channel)  , XLR inputs, phono input, etc.
       
      Reluctant  sale due to lack of space and recent purchase of Halcro MC20.
       
      Happy to demo for serious buyers .
       
      The cheapest price at the moment is from China, $4,192.09 AUD (+ import duties), check link for specs and price:
       
      https://www.china-hifi-audio.com/en/yarland-hifi-tube-amp-c-61/yarland-auklet-845-class-a-single-end-integrated-tube-amplifier-psvane-845-2a3-p-1799?zenid=4804b33a6cd5887649aacf138d36d3aa
       
       845 tubes are nearly new (less than 50 hours). Other tubes " as new", very strong...can test it with my tube tester for potential buyer.
       It was in storage for last 5-6 months. (shifting house)
      
      Comes with original box, one spare Shuguang845 tube, manual, remote and pair of gloves for safe handling).
       
      Local buyers preferred. Very heavy, over 35kg (without tubes). Declared weight on Yarland site of 28 kg is incorrect.
       
      First one and inside photos are mine, others from Yarland web site.
       
      Photos: Advertisements without photos of the actual item will not be approved.












    • By dsj1188
      Item: Panasonic UB900 4k UHD Blu-ray player
      Location:Sydney
      Price: $350 obo
      Item Condition:Excellent
      Reason for selling:NRQ
      Payment Method: Pickup or post at buiyer's expense - Cash, Paypal, COD Only
      Extra Info:Played at most 10 discs before I bought the 820 for DV. Has been in storage for 6 months. It is boxed using the 820 box and it fits exactly. The remote is backlight unlike the 820. 
      https://www.techradar.com/au/reviews/audio-visual/blu-ray-players/panasonic-dmp-ub900-1312558/review
       

       
      Photos: Advertisements without photos of the actual item will not be approved.


    • By karmakat
      Item: Onkyo T-4711 AM/FM tuner
      Location: Inner west Sydney
      Price: $200
      Item Condition: used
      Reason for selling: NLR
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      Highly regarded and rare analogue AM/FM tuner made in Japan in 1996.
      Rotary frequency selector. Very solid feel with a smooth sound and great sensitivity.
      Details on "tuner information centre" - http://www.fmtunerinfo.com/onkyo.html
       
      No remote. It has a 2 pin (240v)plug Euro/US? but I will supply an adaptor, and basic L/R RCA's if needed.
      Excellent cosmetic and working condition - some very fine marks on the top surface.
      Can demo.
       
      (from Hifi engine)
      Sensitivity: 0.9uV (FM), 25uV (MW)
      Signal to Noise Ratio: 77dB (FM), 40dB (MW)
      Distortion: 0.2% (FM), 0.8% (MW)
      Selectivity: 70dB (FM)
      Frequency response: 30Hz to 15kHz (FM)
      Output: 1000mV (FM), 250mV (MW)
      Dimensions: 435 x 91 x 373mm
      Weight: 4.9kg
       
      Photos: Advertisements without photos of the actual item will not be approved.







    • By jyojo
      Item: ND5 XS Streamer + XP5 XS Power Supply
      Location:Sydney
      Price: $4250
      Item Condition:Excellent
      Reason for selling:Upgrade
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:This ND5 XS and xp5 Power Supply is in mint condition.
      Selling due to Upgrade offer. I have original boxes and comes with burgundy.
      The significant sonic improvement is only happen when you use XP5 XS, beating even NDX, the upper model for this.
      There are many reviews and what is the current RRP on the internet you can check. For sale as both not separate .
       
      Photos: Advertisements without photos of the actual item will not be approved.




×
×
  • Create New...