Jump to content



Recommended Posts


Location: Brisbane

Price: $300 including postage

Item Condition: New

Reason for selling: NLR

Payment Method: Pickup & postage = Paypal (as a friend or add 3%)

Extra Info:


These cables are hand made in HK by the owner of Afterdark. They use state of the art connectors and have an extra layer of Carbon sheathing which dissipates EMI (comparable to the Audioquest Vodka LAN cable which retails at $439 for 0.75m). Suitable for data transmission as well as I2S.

2 cables, new in original bags.



- Electromagnetic Interference (EMI) is designed to minimise the effects of RF interference and other forms of EMI when designing digital lines. Material selection, physical layout, grounding practices, and digital line design have been specified to reduce the impact of electromagnetic fields on the performance of the unit. At the same time, however, the main goal of the store owner is to accurately reproduce the music recorded in the studio in a normal home environment. 

Why choose carbon fiber shielding?
Carbon fiber originated from aerospace materials, but with the increasing use of this material, carbon fiber shielding has successfully solved electronic equipment and EMI (electromagnetic interference), and successfully applied carbon fiber composite shielding method to fever audio network. Cable.



Technical Specification:


  • First Layer of aluminum foils for 4 pairs of AWG23 0.57mm core cables, each pairs was covered by layer of aluminium foils with providing 100 % coverage to eliminate the interference between each pairs of core cables. 
  • Superior dual-layer isolation, 1st Layer of aluminium foils for High Frequency (HF) Effective shielding. SFS-PE (Foam-Skin Polyethylene) insulated and 2nd layer of copper wire braiding. This will prevent external noise from getting to the signal conductors, shields the shield of the cable to further prevent the ingress of noise (RFI, etc.) into the signal wires.
  • Third Layer of Carbon Fiber Shielding (CFS) Woven for EMI shielding, the highest standard of shielding material which mainly used for industrial and most demanding engineer on special project.  
  • “Extra Grounding Wire” was placed between Superior dual-layer isolation for extra safety and provide electrostatic shielding on the cable, this grounding wire can only be found on the highest specification of CAT 7 and designed for “Professional Use” in Computer Data Center and Server Room where the electronic static protection is critical factor for 24x7 operation.
  • Oxygen Free Copper (OFC) conductors, 4 x 2 AWG 23/1, solid twisted single core pair.
  • High speed low-loss SFTP LSZH insulation: high quality insulation for cables that has less impact on the signal and insulates the conductors well. LSOH IEC 60332-1, Outer Dimension : 7.8mm
  • Category 7 RJ45 connector: Telegartner MFP8 Plug (Made in Germany) gold-plated conductor pins enclosed inside the extruding solid spring steel, safety pressured plug not only tighten but also provide moderate contact force for mission critical device,  the highest standard for Audio Grade connector. 
  • All hand Made in Hong Kong by AfterDark.





Edited by scumbag

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...