Jump to content

Sign in to follow this  

Audioquest Angel RCA-RCA interconnect cable

Recommended Posts

Location: Sydney

Price: $ 900 +Postage, Paypal fees 4%

Item Condition: Like New

Reason for selling: No longer needed

Payment Method: Pickup - Cash, Paypal.

Extra Info:




Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.




Perfect-Surface Technology applied to extreme-purity silver provides unprecedented clarity and dynamic contrast. Perfect-Surface Silver (PSS) is AudioQuest's highest-quality metal. Solid conductors prevent strand interaction, a major source of cable distortion. Extremely high-purity Perfect-Surface Silver minimizes distortion caused by the grain boundaries that exist within any metal conductor, nearly eliminating harshness and greatly increasing clarity compared to OFHC, OCC, 8N and other coppers.




Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then later released as distortion. Air, however, absorbs next to no energy, and FEP is the best extrudable solid insulation, absorbing less energy than other materials. The use of FEP Air-Tube insulation, with almost nothing but air around the solid PSC+ conductors, improves the sound of an audio system's focus and dynamics.




It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.




All insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements. (DBS, US Pat #s 7,126,055 & 7,872,195 B1)




Cold-Welded, Direct-Silver Plated Pure Red Copper Terminations. Direct-Silver Plating is optimized for sound. It looks dull because there is no underlying layer of shiny, distortion-causing nickel.1565333664621.jpeg1565333687764.jpeg1565333767585.jpeg

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Classifieds Statistics

    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Supermantits
      Item Condition: Near New Shipping Options: Pickup available but audition is not available. Suburb or Town: Sydney, Macquarie Park State: New South Wales Payment Method: Cash on Pickup or PayID EFT Reason for selling: Upgraded to Beyerdynamic T1's Further information: These are absolutely fantastic and if you know StereoNet exists, you probably know what HD600's are.
      Amazing sound quality and build quality as you'd expect from Sennheiser, only selling as I've upgraded to a pair of Beyerdynamic T1's at more than double the HD600's price point.
      No box is included as I genuinely never thought I'd sell these, but the audio bug is a pricey one to catch.
      Purchased new from Addicted To Audio in Newtown on 24/04/20 - Tax invoice from that purchase will be provided once purchase is complete.
      I will verify these are functioning clearly via an ifi xDSD Portable DAC / AMP but auditioning is not available.

    • By MAST88
      Item Condition: excellent Shipping Options: Pickup available and you can audition. Suburb or Town: Homebush West State: New South Wales Payment Method: Cash EFT Reason for selling: Have a new-born, creating a kids-free environment-means just digital Further information: For sale is my well looked after tt, bought from Sydney Hifi Castlehill, a truely solid German built tt, weights around 25kg. No scratches, extremely smooth bearing - I sometimes bring it out to the dinner table and use it as Lazy Susan when the families are over for yumcha (jokes haha). The current Challenger is RRP at around $6800 without tone-arm.
      Tonearm is TA-500, tracks well, sometimes let my nephews use it to draw circles (again do not take this seriously). RRP currently $2500
      Comes with the crappy Ortofon MM Red, have done around 20hrs on it before I changed it.
      Currently attached is Nagaoka MP110 (paid $250 from Japan) done also only around 50 hrs, and will throw it in depending on if you're nice or not (and nice means negotiating or not lol)
      I also have the Toner record weight (rrp$170), also will throw in if you're extra nice
      ...Ikea board also can be thrown in
      The stuff you have to pay:
      Oyaide STBHWX record weight (also bought in Japan for $270) Pm for price, if not I'll keep it to tamp my coffee...such a beautiful little thing!
      Also has custom tube Phono stage with separate PSU built for both MM & MC if interested (underneath the TT in picture, pm for price)
      I have all original boxes, however not willing to post at this stage due to shipping-nervous-breakdown.

      Photos: Advertisements without photos of the actual item will not be approved.

    • By MAST88
      Item Condition: 99.9 New Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Homebush West State: New South Wales Payment Method: EFT, cash Reason for selling: Tried and moving on Further information: Hi guys, for sale is my 2-week old with under 20 hours of run time, so need a bit more hours to run-in.
      I've always been curious with JBLs and got them to try, can see why they are well-respected speakers, definitely interest to try the bigger Synthesis stuff.
      Anyways, Condition as expected is practically brand new, have not moved it since, might get a bit of dust (under the microscope).
      Has all original packaging.
      Price is firm.
      PS: These weren't from the group-buy that SNA had recently so I couldn't pass on the greater savings like others. They still have 11 months of warranty left. PM me for more info.
      Photos: Advertisements without photos of the actual item will not be approved.

    • By icon
      Item Condition: Excellent Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Frankston sth State: Victoria Payment Method: EFT, Cash on Pickup Reason for selling: No longer required Further information: 
       For sale is the very rare ME900 mono block 1 only, I have never actually seen another one on the second hand market....
       It has been on home theatre centre channel duties & live its life in a ventilated cabinet hence the excellent condition.
       Comes with original timber shipping crate & cover bag.
       Has just had it's 10 year service performed by Ron Berger of Winovate works carried out
       2 x 2way & 4x 3way  rising clamp screw terminals replaced with modern clamps more suited to the wire sizes used.
      Visible light fan speed sensor replaced with new info red sensor sourced from Peter Stein.
       Air inlet & fan baffle foam replaced.
      All ageing Electrolytic Capacitors replaced.
      Bias currents adjusted.

      Photos: Advertisements without photos of the actual item will not be approved.

    • By Analysis
      Item Condition: Good Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Caulfield North State: Victoria Payment Method: PayPal (+ fees), EFT, Cash on Pickup etc Reason for selling: NLR Further information: The ZS5300 brings Marantz excellence to the custom market with a full 60 watts RMS output from each of its six channels. You can
      bi-wire the front speakers for your home theatre to have 120watts per channel, or for those who want to extend high quality audio from their main entertainment area to many rooms in a home, office and cafe. It will direct up to three separate sources to three different rooms or zones.
      Need even more coverage? Simply use up to three ZS5300s for nine-zone capability. Party mode lets you send the same signal throughout your home. You'll find front panel source and zone status indicators. And ''pass through'' pre-amp outputs so you can add a more powerful amplifier if needed. An RC-5 remote connection, local input capability, and 12V ''trigger'' outputs complete the list of custom-friendly features.
      The amplifier is in used condition with some marks on the face, but it doesn't effect the operation. Please refer to the photos for description. 
      Comes with power cord and remote.

      Advertisements without photos of the actual item will not be approved.
  • Create New...