Jump to content

Sign in to follow this  
Simon1916

FS: REGA CURSA3 PRE and REGA MAIA POWER AMP

Recommended Posts

Item: Rega Pre + Power Amp (CURSA3 + MAIA)
Location: Campsie 
Price: $1,100
Item Condition: Very good condition
Reason for selling: NLR
Payment Method: Pickup - Cash,  COD Only
Extra Info:

 Selling for a friend these Rega pre/power combination with Solar remote control. Power amp is 85 watts per channel. Very seldom used in their early years and have been in the garage for more than 10 years. They are working perfectly. Happy to play some songs for you if you are serious.

No boxes for these amps so I prefer local buyers. Please do not hesitate to pm me if you have any question.
Photos: Advertisements without photos of the actual item will not be approved.

IMG20190830221141.jpg

IMG20190830221158.jpg

IMG20190830221309.jpg

IMG20190830221233.jpg

IMG20190830221242.jpg

IMG20190830234059.jpg

Share this post


Link to post
Share on other sites

Great buying here... im sure pleanty would disagree but imo this combo bests an elex r and probably goes close to matching an elicit r.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DamonsHIFI
      Item: Paradigm Cinema Speaker 200 RRP $399

      Location: Brisbane QLD

      Price: $100

      Item Condition: Great

      Reason for selling: Not being used

      Payment Method:  Cash, Paypal, Bank Transfer

      Extra Info: Can sit upright on tv unit etc with tilt adjustment from the black piece attached on the back of the speaker. Also can be wall mounted with general screws.
      Printed manual included.
       
      Happy to post at buyers expense.
       
      Photos:





    • By tomwu
      Item: Christie HD3 1080p 3DLP with Xenon bulb
      Location: Cherrybrook, NSW 2126
      Price: 2500
      Item Condition: 7/10 (lens small chips, some tiny dots on the projector body as per photos)
      Reason for selling: Upgraded to a brighter model (HD6K)
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      This is a rare opportunity to have such a great projector, way way way better than those sub-10 thousand 4K consumer ones. It is a huge sized projector, weight 34kg without lens and the lens is another 5 or more kgs. RRP around $50000 USD for the projector and $6000 for the lens! It's over 100,000 AUD totally when it was new.
       
      https://www.christiedigital.com/en-us/3d/products-and-solutions/projectors/mirage-HD3-3D-Stereoscopic-Projector
       
      Selling due to I find a 6000lm HD6K is better fit for my 175 inch screen. Although when use this HD3 for 175 inches, the image, the brightness is already way better than any consumer projector, I feel it will be perfect for 150 inch or so.
       
      It use 3DLP chips, it's 3X0.95 inch DLP chips. Now a days new 4K DLP projectors are using single 0.47 inch (physical resolution 1080p, yet shift to 4K) and 0.66 inch (premium models with 25XX resolution shift to 4K). So it's like consumer cheap camera VS professional DSLR, even consumer ones got more pixels, it can not compare with professional DSLR with prime lens. With 3DLP chips, there's no color wheels so no rainbow effects.
      The lens is a fixed 1.1:1 (HD) short through lens which can do 150 inches with 4M distance. The lens is massive and very heavy. It has some chips yet there's no visible impact to the image. I have another same model lens without any chip yet can't tell difference when I swap lens.
       
      It's using 500W Xenon bulb. Which Xenon ones have best spectrum that close to sunlight. So it's not like other UHT lamp or LED or laser that certain color is weaker on spectrum that you need to calibrate the project to have accurate color while it's a lot dim than advertised. Xenon bulb projectors has no such issues and color is the best even better than latest top end LED/laser projectors.
       
      The projector is around 3290 hours and lamp is 495 hours (1500hours life, if you adjust to lower power such as 350 or 400W, the bulb will have longer life)
       
      Pros:
      Best color I've ever seen! Very rich, dynamic image. It's not like lots of 4K projectors that the image is 'flat'. This one the image gives you 3D feels. It's like a highend plasma VS  cheap LCD TV. The color, the brightness is better than movie theaters. Great contrast Crystal clear. Resolution wise it's not 4K, yet I guarantee you'll find it's more 'clear' than normal 4K projectors Very bright, best on a 133-150 inch and will still be good on 180 inch screens. Massive sized short throw lens gives you chance to project very large image. (1.1:1 lens) It supports 3D, yet it's frame to frame 3D format that you'll need to have some other video processor to convert from generic BluRay. Yet I've heard someone did it and find the 3D is way way way better than any other projector or the cinemas.  
      Cons:
      Very loud - fan noise around 60DB. Better to build a 'hush box' (which I'll build one in near future). However for the image quality, I can bear with the noise actually. 500W Xenon bulb - can adjust between 350W to 500W yet it use more electricity than normal projectors. Lens got some chips, however there's no visible impact to the image. Xenon bulb is expensive.  
      This projector is for enthusiasts, for those who really want to be moved by the image, and can live with the cons come with the projector.
       

      Photos: Photos can not justify how great the image is as my camera is not good enough to have grey levels to show all the details. 











    • By EdgyGrimDark
      Item: FiiO Fa7
      Location: Adelaide
      Price: $200
      Item Condition: 9/10 like new
      Reason for selling: no longer used
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: missing mmcx cable, cat used it as a chew toy. Decided Instead of replacing the cable to sell instead and put the money towards my other hobbies.

       
      Photos: Advertisements without photos of the actual item will not be approved.



    • By Tom Z
      Item: Astell & Kern AK300 DAP
      Location: Melbourne
      Price: Paid $1299, asking $650 + shipping firm
      Item Condition: Brand new
      Reason for selling: Not used
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Up for sale is this new/unused AK300 which I bought from Addicted to Audio in Aug, 2016. I had the intention of using this player with a pair or Campfire Audio Andromeda IEM's, but found it more convenient to use my Iphone with my busy lifestyle. Hence this unit and & the Andromeda iem's have just been sitting in their boxes unused since. I auditioned a demo AK300 and Andromeda IEM's extensively at ATA and they proved to be a good combo. The AK300 has good resolution and is on the warm side, whilst the Andromeda iem's are neutral, natural and airy.
       
      Link to product information - https://www.astellnkern.com/eng/content/shop/features.asp?mcg=CG110000&mpos=0&scg=CG210240&spos=4&tcg=&tpos=0&dpos=1&gcode=SC10780
       
      A note about shipping:  
       
      I will ship this item double boxed via Australia Post Express Post with Signature on delivery, or local pickup is welcome. If paying via Paypal, the buyer pays the Paypal fee which is 2.6% + 0.30c for domestic transactions. I will also make a 2% donation to the Bushfire Appeal on completion of the sale. All original items are included with the unit.  Any questions, just ask.
       

       

       

       

       

       

       


       
    • By andrewp
      Item: Aurender N10
      Location:NZ
      Price: 6000AU plus delivery
      Item Condition:mint
      Reason for selling:NLR
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       Relist. Lots of reviews on line about this machine. 
      Photos: Advertisements without photos of the actual item will not be approved.





×
×
  • Create New...