Jump to content

Sign in to follow this  
SoundGuy

FS: [Relist] Mark Levinson 531H

Recommended Posts

Item: Mark Levinson No.531H Power Amplifiers
Location: Perth S.O.R
Price: $12,000 $10,500 $9700 
Item Condition: As new (10/10)

Reason for selling: NLR and Need Money
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:

Bought in April this year from a European authorised dealer  to power my Usher BE-10 speakers but the ushers are so efficient they don’t benefit from a lot of power these behemoth can put out and I need money for a Japan holiday. Australian retail price for these is over $20,000; 

Mark Levinson No. 531H Monaural Power Amplifier 

The No 531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker. 

The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. 

Main Features 

•Reliable, high-power in four different channel configurations provide ideal solutions for any system 
•Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels 
•Fully-differential circuitry with both balanced XLR and single-ended RCA inputs 
•Ethernet and 12V trigger control capability for system integration 

Inputs one balanced XLR input per channel; one unbalanced RCA input per channel 
Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) 
Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector 
Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at 85dB, reference level: 2.83 Vrms 
Input Sensitivity 2.83Vrms output at 130mVrms input 
Gain 26.8dB 
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced) 
Power Requirements 100V~, 120V~, 230V~, factory set for destination country; 
Power Consumption 300W 
Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) 
Width 17.75" (45.1cm) 
Depth 19.83" (50.4cm) 
Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg) 
Tags: Krell, Mcintosh, audio research, luxman, accuphase, esoteric
 
Photos:
 
ml3.jpg.7871e6d8eee39790410a667d0c837a88.jpgml2.jpg.1d879c364d0b9ce237a8c8144afd41a8.jpgML1.jpg.ce6a6162caf6d5d025c44cf6150a5f51.jpg1086003115_MarkLevinson-1(2).thumb.jpg.5b25eb274554f50037672aa1010b9a05.jpg925874140_MarkLevinson-2(1).thumb.jpg.efc4617e250e944f5389c179d10a9b48.jpg1064134261_MarkLevinson-1(1).jpg.4f49020b404ff710d67a37576b500687.jpg938817766_MarkLevinson-3.jpg.478d0f04072f2db3159109feb5ef9aa7.jpg1352468835_MarkLevinson-4.jpg.ffcfce770282fe5d87900fe6dd99f2cf.jpg110960688_MarkLevinson-2.jpg.bc13d05eceaac69adbc54ce8acf41e5e.jpg793595469_MarkLevinson-5.jpg.7d61300bb2cd288c626a5dd5a56fd411.jpg1852775615_MarkLevinson-1.jpg.241555ee10fd86478aa88c1f4eff7b8b.jpg
 


 

 

Share this post


Link to post
Share on other sites

If only I had the money to buy these beauties.. 

Share this post


Link to post
Share on other sites

If only i had the money to buy the Mark Levinson transportation cases  :D

.......................................................GLWS...........................................................

Edited by Electrovoice Interface.

Share this post


Link to post
Share on other sites

About the only thing I think I could afford are the speaker outputs - whatever brand they may be.

 

Absolutely stunning amps !!

 

GLWTS

Share this post


Link to post
Share on other sites


Did you buy April this year or April 2018?

GLWS

Share this post


Link to post
Share on other sites

Sorry. April 2018. They’ve been in their carry case since new. Thanks. 

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kelossus
      Item: Mcintosh C2300 Tube Preamplifier
      Location: Ipswich QLD
      Price: $5000 FIRM - No offers
      Item Condition: Excellent
      Reason for selling: NLR
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      Comes with NOS Telefunken ECC83s in the linestage. Factory tubes in the MC/MM phono section. Has the new Mcintosh replacement remote which looks a million times better than the old and the plastic doesn't go sticky.
       
      IMO the C2300 and C2200 are far better preamps than the newer models.
       
      I don't have the original box so shipping local pick up only.
       
      Apologies for the smudges on the glass face plate, these were not visible when I was taking the photos. In near new condition.
       
      Specifications
      Frequency response: 10Hz to 100kHz
      Total harmonic distortion: 0.08%
      Gain: 60dB (MC), 40dB (MM), 15dB (line)
      Input sensitivity: 0.45mV (MC), 4.5mV (MM), 450mV (line)
      Signal to noise ratio: 80dB (MC), 80dB (MM), 93dB (line)
      Output: 2.5V (Pre out), 8V (Pre out Max)
      Dimensions: 444 x 152 x 457mm
      Weight: 13.41kg

       
      Photos:

    • By palexsia
      Item Condition: New Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Templestowe State: Victoria Payment Method: Cash pickup , eft . Reason for selling: Selling for friend Further information: 
       As photo 
      Photos: Advertisements without photos of the actual item will not be approved.



    • By jakeyb77
      Item Condition: Used Shipping Options: Pickup available but audition is not available. Suburb or Town: St Kilda East State: Victoria Payment Method: EFT Cash PayPal (you pay fees) Reason for selling: Too many TT Further information: 
      Pictures form the description. 
      Plinth has seen better days due to an accident. Just a couple of chips that could be filled and stained again. It’s still a straight plinth. 
      This table has been used about 4 hours since I put it together. 
      These parts were brand new with 4 hours on them.
      Mober bearing and inner platter and cross brace. Mose PSU. Premotech motor. 
      Brand new belt and springs and grommets. 
       
      Old parts- plinth, top plate, sub- chassis and hardware. Linn rubber mat. Linn Masonite base. 
       
      Doesn’t come with arm but I also have a Wand Tonearm for sale. Also have a Zu Audio Denon 103r with less than 300hrs 


       
       












    • By MGO
      Item Condition: Very good for age: 60 + Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost. Suburb or Town: Little Bay State: New South Wales Payment Method: Paypal, EFT, Cash on Pickup Reason for selling: NLR Reduced $$$:
       
      Western Electric 10GA Tinned Copper with Cotton covering.  Twisted Pair Speaker Cable
      The price is for a stereo pair of 3 metres.
       
      This is the wire Duelund copied "A wire originally born of the desire to improve upon legendary studio vintage cabling."  The legend is this WE cable!
       
      This is great speaker wire especially for bass and mids.  
      It is twice as thick and has 4 times the cross sectional area of the famous WE16GA as featured on Jeff's Place
      https://jeffsplace.positive-feedback.com/the-vintage-beat-western-electric-we16ga-speaker-cable/
       
      NB. Other lengths available - to be listed.
       

    • By christos540
      Item Condition: Mint - approx 10 hours listening time Shipping Options: Pickup available and you can audition.,Shipping is included in price. Suburb or Town: PALMVIEW State: Queensland Payment Method: Paypal, Cash on Pickup Reason for selling: Great sound but I have fallen in love with something Hi everyone,
       
      I'm am selling my new Master & Dynamic MW65 Wireless Headphones. These are in mint condition & they sound great, however there's another set of cans that I have
      fallen in love with, so I am putting these up for sale. Everything is in perfect working order. Comes with original box, packaging, cables etc. They have a great 1970's industrial look to them
      & IMO are a reasonably neutral headphone. Supports AptXHD as well. PRICE is NEGOTIABLE. Specs below.
       
      MODEL

      MW65


      ACTIVE NOISE-CANCELLING

      Feed-forward and feed-back (hybrid) active noise-cancelling technology


      MATERIALS

      Leather, Anodized Aluminum


      DIMENSIONS

      165mm x 190mm x 66mm


      CABLES

      1.5m Standard 3.5mm Audio Cable, USB-C to USB-C Charging Cable (with USB-A Adapter)


      HEADPHONE CONNECTION

      Optional 3.5mm Passive Audio Input, Two-Prong Flight Adapter


      MICROPHONE TYPE

      Beamforming Noise Reduction Mic Array


      VOICE ASSISTANT

      Google Assistant built-in, voice assistant enabled


      DRIVERS

      40mm Beryllium


      WEIGHT

      245g


      EAR COUPLING

      Over-Ear


      IMPEDENCE

      32 Ohms


      EAR PADS

      Replaceable Lambskin-Wrapped Memory Foam


      BLUETOOTH PROFILE

      Bluetooth 4.2 Supporting AptX, AptX HD and SBC.








×
×
  • Create New...