Jump to content

Sign in to follow this  
mminnett

SOLD: FS: Mark Levinson No.38 Preamplifier

Recommended Posts

Posted (edited)

Item: Mark Levinson No.38 Preamplifier
Location: Stanmore NSW
Price: SOLD
Item Condition: Excellent 
Reason for selling: Surplus to needs
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info:
The Mark Levinson No.38 Preamplifier is a superb sounding piece of equipment. It is built like a tank and has never had any issues, it is presented in fantastic condition.

It has been replaced with a Mark Levinson No. 380s. 

Comes with remote and power cord.

I purchased this amp without boxes, as such I would prefer a local pick up at this time.

Cash on pick up or (PayPal +3%)
As always happy to audition.
 

A2B271FA-B3D6-411A-8B04-D7C246E79B95.jpeg

D85C35AC-0E0D-4914-AF20-F0FD22FAD41D.jpeg

B1BA25FA-6DEC-426F-9F83-ACFA6BC7A53F.jpeg

8479DDFB-2767-4521-97CA-3E2DB3C1DDFC.jpeg

784E968D-2997-4DEC-93C3-8574CB987AF2.jpeg

A4ABE9CE-F1BB-405C-BCA7-9E29B521C79F.jpeg

1061B4E0-0FBC-4E6C-A50A-98E8E5BE9001.jpeg

Edited by mminnett

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By audioboat
      Item: [PRICE DROP] Mark Levinson 332 Power Amplifier
      Location: Melbourne 3057
      Price: $4500, $3900.00 
      Item Condition:
      Reason for selling:
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: I purchased this unit from SNA member Winter late last year. The unit is still in perfect working order and never has an issue at all.
       
      Original listing:
       
       
      Specifications
      Rated power output
      200 w/ch continuous rms power @ 8Ω
      400 w/ch continuous rms power @ 4Ω
      800 w/ch continuous rms power @ 2Ω
      Frequency response
      0.1 dB from 20 Hz to 20 kHz
      Input impedance
      100kΩ (balanced
      Shipping weight
      150 lbs.
      Damping factor
      greater than 800
       
       

       
      Photos: Advertisements without photos of the actual item will not be approved.



    • By SoundGuy
      Item: Mark Levinson No.531H Power Amplifiers
      Location: Perth S.O.R
      Price: $12,000 $10,500 $9700 
      Item Condition: As new (10/10)
      Reason for selling: NLR and Need Money
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Bought in April this year from a European authorised dealer  to power my Usher BE-10 speakers but the ushers are so efficient they don’t benefit from a lot of power these behemoth can put out and I need money for a Japan holiday. Australian retail price for these is over $20,000; 

      Mark Levinson No. 531H Monaural Power Amplifier 

      The No 531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker. 

      The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. 

      Main Features 

      •Reliable, high-power in four different channel configurations provide ideal solutions for any system 
      •Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels 
      •Fully-differential circuitry with both balanced XLR and single-ended RCA inputs 
      •Ethernet and 12V trigger control capability for system integration 

      Inputs one balanced XLR input per channel; one unbalanced RCA input per channel 
      Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) 
      Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector 
      Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at 85dB, reference level: 2.83 Vrms 
      Input Sensitivity 2.83Vrms output at 130mVrms input 
      Gain 26.8dB 
      Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced) 
      Power Requirements 100V~, 120V~, 230V~, factory set for destination country; 
      Power Consumption 300W 
      Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) 
      Width 17.75" (45.1cm) 
      Depth 19.83" (50.4cm) 
      Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg) 
      Tags: Krell, Mcintosh, audio research, luxman, accuphase, esoteric   Photos:    
       
       
    • By SoundGuy
      Item: Mark Levinson No.531H Power Amplifiers
      Location: Perth S.O.R
      Price: $12,000
      Item Condition: As new (10/10)
      Reason for selling: NLR and Need Money
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      Bought in April this year from a European authorised dealer  to power my Usher BE-10 speakers but the ushers are so efficient they don’t benefit from a lot of power these behemoth can put out and I need money for a Japan holiday. Australian retail price for these is over $20,000; 

      Mark Levinson No. 531H Monaural Power Amplifier 

      The No 531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker. 

      The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. 

      Main Features 

      •Reliable, high-power in four different channel configurations provide ideal solutions for any system 
      •Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels 
      •Fully-differential circuitry with both balanced XLR and single-ended RCA inputs 
      •Ethernet and 12V trigger control capability for system integration 

      Inputs one balanced XLR input per channel; one unbalanced RCA input per channel 
      Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) 
      Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector 
      Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at 85dB, reference level: 2.83 Vrms 
      Input Sensitivity 2.83Vrms output at 130mVrms input 
      Gain 26.8dB 
      Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced) 
      Power Requirements 100V~, 120V~, 230V~, factory set for destination country; 
      Power Consumption 300W 
      Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) 
      Width 17.75" (45.1cm) 
      Depth 19.83" (50.4cm) 
      Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg) 
      Tags: Krell, Mcintosh, audio research, luxman, accuphase, esoteric  

      Pictures:











    • By TomW
      Item: Mark Levinson Preamp No. 326S
      Location: Sydney (will not ship)
      Price: Asking $5000 (new approx. $18,000)
      Item Condition: Excellent (9/10) – bought new in 2006 (9/10 rating due to age)
      Reason for selling: I use a DSP unit now instead due to a problematic room
      Payment Method: Cash - pickup, Direct deposit (pickup required)
      Extra Info: Refer to http://www.marklevinson.com/productdetail/~/product/no326s.html for detail and photos.  Have original packaging and documentation.  Optional phono stage board not installed.  Remote included.
      Serial Number:  1159
      Pictures: Refer to http://www.marklevinson.com/productdetail/~/product/no326s.html
      Reviews:  http://www.theabsolutesound.com/articles/mark-levinson-no326s-preamplifier-and-no432-power-amplifier-1/
      http://www.whathifi.com/mark-levinson/no326s532h/review
       
    • By cogitator
      Seeking the above. Kindly contact me if you have one for sale.
       
       
      Thanks!
×
×
  • Create New...