JayNTH Posted August 4, 2019 Share Posted August 4, 2019 (edited) Item: YAMAHA CA-2000 Integrated amp Location: Sydney Price: 1200 plus postage if required. Item Condition: Excellent working condition. Reason for selling: Reduce my collection. Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: This beautiful vintage Yamaha amp CA-2000 was imported from Japan audio shop for my Yamaha ns-1000M and just having played a couple of times then sitting back on the shelf gathering dust, hence it time for someone who love the natural sound of this serious seri of Yamaha amp to enjoy it. This amp can be run on class A 30 wpc at 8ohm output, very impress sound, deep base, very clear sound stage. The amp is in excellent working condition, never been repaired or restored, all the electronic components are original, outside no scratches, no marks on the cabinet, front face very clear and clean. Note: This amp is 100v need a step down transformer to run. Link for specs: https://audio-heritage.jp/YAMAHA/amp/ca-2000.html Model Stereo integrated amplifier Effective output (0.03%, Aux) 20Hz to 20kHz: 140W + 140W (4Ω, Class 120W + 120W (8Ω, Class 30W + 30W (8Ω, Class A) 1kHz: 180W + 180W (4Ω, Class 130W + 130W (8Ω, Class B ) ) Total harmonic distortion (20Hz-20kHz) Phono1, 2 → Rec out (5V): 0.003% or less Phono MC → Rec out (3V): 0.03% or less Tuner, Aux → Pre out (3V): 0.005% or less Main in → SP out (60W, Class B, 8Ω 0.01% or less (15W, Class A, 8Ω): 0.005% or less Tuner → SP out (60W, Class B, 8Ω): 0.01% or less Power bandwidth (0.03%, 8Ω) Class B: 10Hz to 50kHz Class A: 10Hz to 70kHz Damping factor 45 or more (8Ω, 1kHz) Frequency characteristic Phono 1, 2 MC (RIAA deviation): 30Hz - 15kHz ± 0.2dB Tuner-Pre out: 5Hz-100kHz +0 -1dB Tuner-SP out (8Ω load): 5Hz-50kHz +0 -1dB Input sensitivity (rated) / impedance Phono 1: 2mV / 47kΩ, 68kΩ, 100kΩ Phono 2: 2mV / 47kΩ Phono MC: 50μV / 10Ω Tuner, Aux: 120mV / 50kΩ Main in: 1V / 50kΩ Maximum allowable input (1kHz, 0.02% distortion) Phono1, 2: 310mVr.ms Phono MC: 7.5mVr.ms Tuner, Aux: 20Vr.ms Output level / impedance Rec out: 120mV / 600Ω Pre out: 1V / 500Ω Tone control characteristics Bass (125Hz⇔500Hz): ± 10dB (20Hz) Treble (8kHz⇔2.5kHz): ± 10dB (20kHz) Subsonic filter 15Hz, 12dB / oct High filter 10Hz, 12dB / oct Noise level / SNR (IHF-A Network) Phono1, 2: 82dB Phono MC: 71dB (input 50Ω short) 68dB (input 0Ω short) Tuner, Aux, Tape: 100dB Main: 118dB Residual noise 0.07mV or less <Meter part> Instruction range -50dB to + 5dB response speed 100μs Return speed 0.95sec <Others> Power supply AC100V, 50Hz / 60Hz Rated power consumption 300W External dimensions Width 461x height 170x depth of 360mm weight 20kg Photos: Advertisements without photos of the actual item will not be approved. Edited August 5, 2019 by JayNTH Price drop $1200 plus postage 1 Link to comment Share on other sites More sharing options...
JayNTH Posted August 5, 2019 Author Share Posted August 5, 2019 Price drop $1200 plus postage. Link to comment Share on other sites More sharing options...
hlov Posted August 5, 2019 Share Posted August 5, 2019 Gorgeous amp, I’m a big fan of vintage Yamaha. I have a CA 810 which I believe it’s the same series as the CA 2000 but it looks like yours is the top model. Good condition based on the pics. GLWTS, I’m pretty sure the buyer won’t be disappointed. H 1 Link to comment Share on other sites More sharing options...
JayNTH Posted August 5, 2019 Author Share Posted August 5, 2019 37 minutes ago, hlov said: Gorgeous amp, I’m a big fan of vintage Yamaha. I have a CA 810 which I believe it’s the same series as the CA 2000 but it looks like yours is the top model. Good condition based on the pics. GLWTS, I’m pretty sure the buyer won’t be disappointed. H Yes it is, this model is top of the range in Japan domestic market, thanks. Link to comment Share on other sites More sharing options...
Recommended Posts