Jump to content

Sign in to follow this  
Jnash

Whatmough P31 information

Recommended Posts

New to the hifi scene and looking for some information on the whatmough p31 proformance series. I have most recently purchased:

P31 x4

P07 x1

Typhoon mk3 x1

C11 x2

I have tried Google but can't seem to find any specifications or any information for that matter. 

All I have found is they use audax drivers. 

Any information, old catalogues or past experience I would love to hear. 

 

Share this post


Link to post
Share on other sites

I would contact Whatmough Audio / The Audio Experts, I'm sure they would be happy to help.

Share this post


Link to post
Share on other sites

Some info from another thread here.....

 

P31 Specifications

Configuration: 2-way bass reflex enclosure using 2 x 170mm Cellulose fibre bass/mid drivers with cast alloy frames and vented magnet structures. The tweeter uses a 35mm dual concentric diaphragm with a wave guide centre plug.

Nominal Impedance: 4 ohms

Amplifier Requirements: Approximately 25 to 150 watts

Power Handling: Transient peaks in excess of 150 watts. Average levels of 100 watts.

Efficiency: 92 dB, input level of 2.83 volts (1watt into 8 ohms)

Frequency Response: 40Hz to 20kHz +/-3dB

Dimensions: 920H x 230W x 265D

Weight: 30 kg each

 

Source link below:

 

Share this post


Link to post
Share on other sites

An excellent pickup depending on price. Well built and good sounding setup.

The P31s were my first real quality speakers. Still have them, but relegated to rears with a P06 as my center.

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By davel
      Item: Whatmough Opus 1 Centre Speaker
      Location: Mount Martha 3934
      Price: $95.00
      Item Condition: VGC
      Reason for selling:  Found an Orpheus Centre to Match My Orpheus speakers.
      Payment Method:  Pickup - Cash,  COD Only
      Extra Info: 
      Dimensions - 45cm * 26cm * 17cm h. Approximately 7.5 kg
       
      One small mark on rear of top surface (see pic), I only noticed this when taking photos.
       
      Been in storage the last 24 months.
       
      Would much prefer pickup but can post at your expense.

       
      Pictures:









           
      TBA
        GO TO TOPIC LISTING NEXT UNREAD TOPIC    
    • By Paul_B
      Item: Whatmough S33i Signatures
      Location: Cheltenham can post at buyers expense. Won’t be cheap they are large and heavy. 
      Price:  $6500 open to realistic offers. 
      Item Condition: 18 months old still Like new. Have original packaging. 
      Reason for selling: no room for hifi equipment 
      Payment Method: Pickup - Cash, Bank Transfer 
      Extra Info:
       I’m regretfully selling these but with my move to QLD  I don’t have room for a large hifi system. They are located at my old work The Audio Experts / Whatmough Audio in Cheltenham and can be picked up from there.  
       
      these are a beautiful sounding speaker they are still a current model and retail at $11,499 they perform well above price range. 

      If they sell at $6500 I’ll include the upgraded isolation feet.  
       
      Description
      Whatmough S33i 3-Way Floor-Standing Speakers
      Overview
      The Whatmough S33i floor standing speakers are the ultimate speaker in the Whatmough Signature series. Their design and built quality are up to the audiophile standards.  The S33i delivers truly spectacular sound.
      The Signature S33i are based on the Performance Series P33i, with significant improvements to bring them up to Signature Series status.
      Cabinet
      This cabinet design offers more than just great looks – they also offer improved sound quality.  By eliminating internal parallel surfaces, the curved surfaces offer clearer and cleaner sound by minimizing internal standing waves.  Even more significantly, the curved panels are inherently more rigid and less resonant than the flat panels of a conventional speaker cabinet, which further helps to minimize coloration.
      Tweeter
      The Signatures S33i uses the same Ring Radiator tweeter that is used in Whatmough’s flagship speaker, the Paragon. This ultra-expensive tweeter sounds incredibly fast and detailed while also sounding extremely smooth and open. It has a very flat response extending to beyond 40KHz.
      Midrange
      The Signature S33i uses a 100mm cellulous fibre coned mid-range driver. This driver has the speed and transparency no bass/mid driver can match.
      Bass
      The Signature S33i uses two 170mm fiberglass/nomex hybrid drivers especially developed for these speakers. The cone for this speaker is made of Nomex with a skin of fiberglass. This long throw driver uses a 33mm high temperature voice coil and a large double magnet system.
      This driver has very high power handling as well as a very transparent detailed sound quality.
      Crossover
      The S33i uses high grade audiophile film and foil capacitors in critical positions.  Air cored coils are used throughout, wound from a heavier grade of high purity Australian copper.
      System
      The perfect partner in the Signature Series system featuring the S8i in the centre and P12i or PFX3i speakers in the rear for a truly exceptional home cinema surround sound experience.
      The S33i is fully made in Australia.
       
      Configuration
      3-way bass reflex enclosure using two 170mm hybrid fibre cone long elbow bass drivers, a 100mm cellulose fibre midrange driver and a 35mm dual concentric tweeter with wave guide centre plug.
       
      Nominal Impedance 4 Ohms
       
      Amplifier Power Requirement 25-150 watts RMS
       
      Power Handling
      Transient level in excess of 300 watts with an average level of 120 watts.
       
      Sensitivity
      88dB input level of 2.83V. (1 watt into 8 ?)
       
      Frequency Response
      38Hz to 40kHz ± 3dB
       
      Dimensions
      260W x 1200H x 430D mm

      Weight 45kg each

      Finish
      Real Bubinga Timber Veneer or Piano Graphite
       
      Warranty 5 Years*



      Photos:
       
      Advertisements without photos of the actual item will not be approved.
    • By Paul_B
      Item:  Whatmough Impact 2 Subwoofer 

      Location: S/E Melbourne can deliver in reason and small charge depending I will be driving from Melbourne to QLD so I pass through Sydney can meet if someone in nsw or qld is interested. 

      Price: Price drop for quick sale moving to QLD. . $1200 these subwoofers were $3999 new. I'm open to offers

      Item Condition: Excellent condition only done about 20hrs, a couple of marks from rubbing when in transit see photos

      Reason for selling: Not used and I'm moving to QLD

      Payment Method: Pickup - Cash, Paypal, COD Only

      Extra Info:
      This is one of the most musical subs I have heard but I now have Whatmough Signature 33s and a sub is not required.
      Product Description
      Whatmough Impact 2 Active Subwoofer  - Extreme low level of distortion with very clean, powerful and tight bass, this subwoofer is capable of producing accurate low musical notes below 20Hz at remarkably high volume levels.  The tight bass extension of this subwoofer is acoustically controlled without the usage of equalisation.
      The Impact2 uses a 250mm extremely long throw driver which has a huge 75mm huge voice coil for a higher power handling and a massive magnet structure.  This driver alone weighs over 10 kgs.  Because it has such a long throw (36mm linear throw), this driver is capable of higher output than most 305mm driver, yet its smaller size allows it to be  noticeably faster and tighter.  A true audiophile subwoofer …
      Finish  - Piano Graphite
       
      Photos: Advertisements without photos of the actual item will not be approved.

       

    • By ArthurDent
      B&W 702 S2 presented by 'The Audio Experts'

      7:45pm Wednesday 18th September

      Willis Room, City of Whitehorse Offices
      Maroondah Highway (Whitehorse Road), Nunawading
      Melway Map 48 Ref G9
      Contact: 9437 1249
       
      It has been over two years since the club was presented with a demonstration from the top-of-the-range B&W speakers, the 800 D3's. Back then, we were introduced to a lot of new innovations that has re-invented this model. In keeping with B&W's philosophy of trickle down technology, the new 702 S2 features many of the new technology from the 800 series.
       
      This month we have 'The Audio Experts' aka Whatmough Audio, presenting at the MAC the new 702 S2 floor standing speaker, and its matching bookshelf model, the 705 S2. The speakers will be demonstrated with the same amplifier from PASS LABS the Model 60, while a Marantz KI Pearl SACD player will be playing the tunes.
       
      B&W has used its new 'Continuum' midrange cone in the 700 series, replacing the old yellow coloured Kevlar design, and have included the 'tweeter-on -top' technology seen on the 800 series. Sitting in its own aluminium machined pod, the 25mm 'Carbon Dome' tweeter is decoupled from the cabinet. The 702 S2 is a conventional rectangular box that houses a 150mm Continuum FST Midrange driver that is also decoupled from the main box. A set of three 165mm Aerofoil drivers look after the bass frequencies.
       
      Like the siblings in the 700 series, the 705 S2 features the new carbon tweeter dome that is more rigid than its previous model, with its first breakup mode now reaching out to 47 Khz. Around the back is the B&W characteristically 'dimpled' reflex port. Supplied with the speakers is a pair of foam bungs (full or half) to accommodate various room placements. The main 165mm mid/bass driver is the new silver coloured Continuum design, said to reach down to 45Hz.
       
      With a number of significant upgrades to the new 702/705 models, they offer a taste of the 800-series sound without spending serious money. Will you be putting them on your Christmas list?
       
      Nick Karayanis, Program Co-Ordinator.
              
      Ken Tripp
      Wise and Wonderful Webmaster
      Melbourne Audio Club, Inc.

      http://www.melbourneaudioclub.org.au
    • By sunbird
      Item: Whatmough Opus 20 Floorstanding Speakers (Pair) including grills and terminal jumpers

      Location: SYD – 2193 Hurlstone Park


      Price: $180 obo, donation to SNA on sale

      Item Condition: Used, functionally/drivers very good, cabinets fair for age with a few marks and scratches in the veneer, grills very good with no tears and all pegs still on


      Reason for selling: NLR

      Payment Method: Pickup - Cash, Paypal friend

      Extra Info: Bought here on SNA some time back, for a mate to use as temp replacements until he settled on some new speakers. That temp stretched for quite some time, as he didn’t appear in a rush to get the Whatmoughs moved on. The time has come though.



      They are a great little speaker for the money, and an awesome little start/add-on for a second system, etc.

      Specs (from a review quoted on the Whatmough site):

      Dimensions: 220 x 830 x 270

      Weight: 16kg ea

      HF: Vifa 25mm fabric dome tweeter

      LF: 150mm Aerogel w/ forward firing bass port


       
      These are pick-up only, either from my place at Hurlstone Park (2193) or Lane Cove West or St Mary’s on a work day if arranged prior. Function test is fine, but no lengthy auditions at this price point please.

      Cheers, Ralf


       
      Photos: Advertisements without photos of the actual item will not be approved.





×
×
  • Create New...