Jump to content

Sign in to follow this  
LWA Staff

Rega R7 Floor Standing Speakers

Recommended Posts

Item: Rega R7 Floor Standing Speakers
Location:  Len Wallis Audio, 64 Burns Bay Road, Lane Cove
Price: $1600
Item Condition: Very good secondhand condition
Reason for selling:
Payment Method: Credit Cards, Cash, Bank Transfer, Paypal, ZipPay with up to 6 months interest free

Shipping:
Extra Info: Just traded R7's from Rega in Rosewood are only a few years young and approximately half the original RRP!
For the R7, Rega’s in-house built drivers that are built to a tolerance level that minimizes the need for crossover correction and utilizes an ultra-efficient design that does not require large amplification power to get the best out of them.

Key Specs:

Height (without spikes)...972mm
Depth at plinth...............348mm
Width at plinth...............270mm
Weight................................17kg

Nominal Impedance........6ohms
Sensitivity...........(Approx) 89dB
Bi-wirable/Bi-ampable..........yes
Power Handling................125w per channel.

Photos:

LWA_Rega_R7_1.jpg

LWA_Rega_R7_2.jpg

LWA_Rega_R7_3.jpg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Gabehcuod
      Price: $300 Item Condition: 6/10 - Woofer has two small dents I only just noticed. Shipping Options: Audition is not available, but in-person pickup can be arranged with limited personal contact,I can ship this item Suburb or Town: Vaucluse, 2030 State: New South Wales Payment Method: Paypal, Cash Reason for selling: New speakers don't need a sub Further information: 
      Hasn't been used for a few months.
      I used to have them paired with Canton GLE426 but since upgrading, I haven't needed this and It's remained off for months.
      MSRP was $675 for the sub (dealers went down to $600) and $110 for the isolation platform.
      The sub can be mounted on the wall or placed underneath furniture and it fits perfectly on the isolation platform.
      The dents have no affect on the sound and cannot be seen when properly placed.

      Photos: Advertisements without photos of the actual item will not be approved.

    • By Psyberpunk
      Price: $7900 Item Condition: Excellent Shipping Options: Pickup is available Suburb or Town: Oxley State: Australian Capital Territory Payment Method: Cash, Bank transfer, PayPal (if you pay fees) Reason for selling: NLR - went back to valves I purchased this amplifier new in April 2017 from an Australian retailer and it still presents in new condition, with no scratches or marks that I can see - so if you've been hunting for a minty McIntosh power amp to upgrade or add to your Mc-Stack then this one could be for you!
       
      Low ballers will be ignored - I’d like to sell this amp because it isn’t being used, not because I need to as a result of any current events.
       
      It's been a fantastic amp however I've move into the Audio Research brand for a sound which is a little different (and for tube power).
       
      I have the original double box, manual, packaging etc for this, it's a crazy heavy beast at 60kg packed - so pick up is preferred.
       
      Any freight required as well as paypal fees are not included in the above price and will be at buyers cost depending on the your requirements.
       
      MC302 features classic McIntosh amplifier styling combined with advanced audio performance. Larger easier to read Watt Meters, New Style McIntosh engineered binding posts and the latest advancements in circuit design combine to make MC302 the Value McIntosh amplifier.
       
      The MC302 Power amplifier has continuous average power output rating of 300 watts per channel, with a peak output current of 60 amperes.
       
      Electronic Specifications
      POWER OUTPUT PER CHANNEL: 300W @ 2, 4 or 8 Ohms
      NUMBER OF CHANNELS: 2
      THD: 0.005%
      S/N BELOW RATED OUTPUT: 122dB
      DYNAMIC HEADROOM: 1.8dB
      DAMPING FACTOR: >40 Wideband
      RATED POWER BAND: 20Hz to 20kHz
      FREQUENCY RESPONSE +0,-0.25DB: 20Hz to 20kHz
      FREQUENCY RESPONSE -3DB: 10Hz to 100kHz
      Control
      REMOTE POWER CONTROL: Yes
      MULTI CHANNEL DB25 CABLE: N/A
      General Specifications
      CIRCUIT CONFIGURATION: Push-Pull Complementary
      CIRCUIT DESIGN: Transistor
      MONO BRIDGE: No
      MONO PARALLEL: No
      AUTOFORMER: Yes
      METERS: Yes
      METER LIGHT SWITCH: Yes
      BALANCED INPUT: Yes
      FRONT PANEL: Glass
      ILLUMINATION: LED Fiber Optic
      CHASSIS STYLE: Open Stainless Steel
      GOLD PLATED BINDING POSTS: Yes, New Style McIntosh
      Weights & Dimensions
      DIMENSIONS (W X H X D): 17-1/2" (44.45cm) x 9-7/16" (23.97cm) (including feet) x 22" (55.88cm) (including front panel, knobs and cables)
      WEIGHT: 98 lbs (44.45 kg)
      SHIPPING WEIGHT: 131 lbs (59.42 kg)
       
      Photos: 
       

       
       
       
       
       

       
       

       

       

       

       
    • By Class A Audio
      Price: $3500 Item Condition: Trade in, excellent physical condition and function Shipping Options: Pickup is available,I can ship this item Suburb or Town: Notting Hill State: Victoria Payment Method: Pickup - Cash, Paypal, COD Only Reason for selling: Further information: 
      Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735
       
      The Rocket 88 is very interesting from several perspectives. It uses a "Retro" design Cat's Eye tube for monitoring output level for each channel. You can see them in the photo above left. These are the round green "things" on the left and right side of the amplifier front panel. They were used on various products back in the 1960s, especially on tape recorders (they were reel-to-reel recorders back then). Only professional recorders had VU meters, and this was long before LCD recording meters that we see on modern cassette recorders of all price ranges.
       
      The Rocket 88 is switchable between functioning in Triode Mode (20 watts Pure Class A output per channel), and Ultra-Linear Pentode Mode (40 watts Class A/B per channel). There is a small toggle switch behind the far left KT-88 and far right KT-88 for switching each channel between these two modes independently, although I cannot think of a reason why I would ever use one channel in triode mode and the other channel in pentode mode. It may be just to keep the circuits as isolated as possible.
       
      Specifications
      Circuit: Push Pull, Balanced, Class A Triode, Class AB 
      Ultra-linear
      Tube Compliment: Four  KT-88 Output tubes, Two EL-84 Current Source Tubes, Two  6922 Input Tubes
      Power Output: 20 Watts RMS per Channel in Triode Mode, 40 Watts per Channel in Ultra-Linear Pentode Mode
      Inputs: RCA Single-Ended, XLR Balanced
      MFR: 15 Hz - 30 kHz ± 1 dB
      Output Indicators: Dual Cat's Eye Tubes
      Size: 9" H x 10" W x 18" D
      Weight: 42 Pounds


    • By Class A Audio
      Price: $2995 Item Condition: Trade in, excellent physical condition and function Shipping Options: Pickup is available,I can ship this item Suburb or Town: Notting Hill State: Victoria Payment Method: Pickup - Cash, Paypal, COD Only Reason for selling: Further information: 
      Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735
       
      REF500M Monoblock Amplifier
      The REF500M monoblock amplifier has excellent power combined with upper midrange and high frequency clarity and openness that lets the subtle detail from your source component pass through to your speakers.
       
      Max Power Output: 500W 4 ohms, 250W 8 ohms per Channel
      Minimum Load: 3 ohms per Channel
      Peak Output Current: 35 Amps
      Balanced Input Impedance: 200 Kohms
       
      Specifications
      Maximum Power Output: 500W 4 ohms, 250W 8 ohms
      Power Output 1% THD: 450W 4 ohms, 225W 8 ohms
      Minimum Load: 3 ohms
      Peak Output Current: 35 amperes
      Frequency Response: +/-3 dB 1.5Hz-70KHz, all loads
      THD+N: 0.003% 1W, 1KHz, 4 ohms
      IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms
      Output noise: 35uVRMS A-weighted 10Hz-20KHz
      Voltage gain: 27dB (single ended or balanced input)
      Damping factor: >1000
      Output Impedance at 100Hz: <8 milliohms
      Dynamic Range: 121dB
      Input Voltage for Max Output: 2Vrms
      Input connections: Single-ended RCA or balanced XLR
      RCA input impedance: 100Kohms
      Balanced input impedance: 200Kohms
      Output connections: 1-set WBT Nextgen 5-way binding posts
      Power On usage: 10W
      Power Off usage: 0.0W
      Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz
      Size: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD)
      Weight: 15 lbs, 7 Kg


    • By Class A Audio
      Price: $4500 Item Condition: Trade in, excellent physical condition and function Shipping Options: Pickup is available,I can ship this item Suburb or Town: Notting Hill State: Victoria Payment Method: Pickup - Cash, Paypal, COD Only Reason for selling: Further information: 
      Location: Class A Audio, 8/585 Blackburn Rd, Notting Hill, VIC, 3168. phone (03) 8555 0735
       
      The RS series of MOON audio components benefit from an even higher standard of manufacturing process than the regular MOON versions. All significant differences are contained within the circuitry and construction of each model.
       
      RS versions are built using different materials and parts in certain areas. For example, printed circuit boards are of a higher temperature grade than that of the military specification FR-4 material we normally use; Their traces are gold-plated instead of a tin/lead composite. As well, all capacitors use improved dielectric materials.
       
      Specifications
      Description: Solid-state, dual-mono stereo power amplifier. Inputs: 1 pair unbalanced (RCA), 1 pair balanced (XLR). Outputs: 1 pair WBT binding posts. Comms: RS-232 port, 12V trigger input and output. Rated power output: 150W into 8 ohms, 300W into 4 ohms, 600W into 2 ohms (all 21.75dBW). Maximum output voltage: 34V. Maximum output current: 42A peak, 18A continuous. Voltage gain: 31dB. Input impedance: 47.5k ohms. Input sensitivity: 980mV for rated power. Frequency response: 10Hz–200kHz, –3dB. Channel separation: 105dB at 1kHz. Output impedance:
      Dimensions: 18.8" (478mm) W by 7.4" (188mm) H by 17.5" (445mm) D. Shipping weight: 85 lbs (38.6kg).



×
×
  • Create New...