Jump to content

Sign in to follow this  
Gazman

SOLD: FS: NAD Pre & Power Amp 1155 & 2200

Recommended Posts

Item: NAD 1155 Pre & 2200 Power Amp (WITHDRAWN)
Location: Adelaide
Price: $600 ONO
Item Condition: Great 
Reason for selling: No longer required
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info: Great package for a vinyl or digital setup, the NAD 1155 Stereo Preamp unit sounds great and has a wonderful phono section. If you're looking for an inexpensive entry into higher-end vinyl performance, this classic little preamp is for you, it has both Moving Magnet and Moving Coil phono stage with adjustable capacitance.

 

The NAD 2200 power amp is conservatively rated at 100w per channel into 8Ω (stereo), 400W into 8Ω (mono) and and the ability to drive low-impedance speaker loads without difficulty. This amp has heaps of power and has fantastic dynamic headroom with a clean neutral sound and all the power you need when you decide to crank it up

 

Both units are in great condition with some very minor surface scratches on the edges, see pictures. Both units have been serviced recently.

 

Pre Amp Specs 

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.02%

Input sensitivity: 0.56mV (MC), 1.2mV (MM), 80mV (line)

Signal to noise ratio: 78dB (MC), 80dB (MM), 95dB (line)

Output: 12V (Pre out Max)

Dimensions: 420 x 75 x 276mm

Weight: 4.13kg

Power Amp Specs

Power output: 100 watts per channel into 8Ω (stereo), 400W into 8Ω (mono) 
Frequency response: 3Hz to 80kHz 
Total harmonic distortion: 0.03% 
Damping factor: 100 
Input sensitivity: 0.7V 
Signal to noise ratio: 111dB 
Speaker load impedance: 2Ω (minimum) 
Dimensions: 420 x 123 x 370mm 
Weight: 12.5kg 

Photos: 

IMG_3709.jpg

IMG_3718.jpg

IMG_3710.jpg

IMG_3711.jpg

IMG_3712.jpg

Edited by Gazman
Withdrawn from sale

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SoundGuy
      Item: Mark Levinson No.531H Power Amplifiers
      Location: Perth S.O.R
      Price: $12,000 $10,500 $9300 
      Item Condition: As new (10/10)
      Reason for selling: NLR and Need Money
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Bought in April this year from a European authorised dealer  to power my Usher BE-10 speakers but the ushers are so efficient they don’t benefit from a lot of power these behemoth can put out and I need money for a Japan holiday. Australian retail price for these is over $20,000; 

      Mark Levinson No. 531H Monaural Power Amplifier 

      The No 531H and No532H are both true mono-block designs with independent power supplies for each channel and are rated at 300W per channel into 8 ohms. The transformers and power supply designs deliver unsurpassed dynamics and transient responses for today’s demanding audio formats and provide stability with even the most difficult to drive loudspeakers. Fully differential circuitry ensures that balanced input signals stay that way throughout the signal path and traditional Mark Levinson “Hurricane” binding posts offer secure termination to the loudspeaker. 

      The four amplifiers in the No500H Series are the definition of truly outstanding performance in their respective categories. Drawing from the Mark Levinson heritage, while utilizing a new, straightforward, balanced, current-feedback design creates a new series of amplifiers that must be listened to in order to be fully appreciated. The final result is impressive even for the Mark Levinson high standard of excellence. 

      Main Features 

      •Reliable, high-power in four different channel configurations provide ideal solutions for any system 
      •Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels 
      •Fully-differential circuitry with both balanced XLR and single-ended RCA inputs 
      •Ethernet and 12V trigger control capability for system integration 

      Inputs one balanced XLR input per channel; one unbalanced RCA input per channel 
      Speaker Connections one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) 
      Communication and Control one Ethernet 10Base-T port; one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc; one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc; 3-pin IEC standard power connector 
      Rated Output Power into 8 ohms 300W/ch (20Hz to 20kHz at 85dB, reference level: 2.83 Vrms 
      Input Sensitivity 2.83Vrms output at 130mVrms input 
      Gain 26.8dB 
      Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced) 
      Power Requirements 100V~, 120V~, 230V~, factory set for destination country; 
      Power Consumption 300W 
      Height (with feet): 7.65" (19.4cm); (without feet): 6.97" (17.7cm) 
      Width 17.75" (45.1cm) 
      Depth 19.83" (50.4cm) 
      Weight Net Weight: 52.5lb (23.8kg); Shipping weight: 62.5lb (28.4kg) 
      Tags: Krell, Mcintosh, audio research, luxman, accuphase, esoteric   Photos:  
    • By Hi-Fi Whipped
      This unit has been mentioned in a number of threads so a couple of us thought it was time for a dedicated thread for users to share experiences and tips and also general discussion providing it stays on topic.
       
      NAD C658 BluOS Streaming DAC with Dirac Live integration
      Manufacturers Product Page: https://nadelectronics.com/product/c-658-bluos-streaming-dac/
      Dirac Live Website: https://live.dirac.com/
       
      Front

      Rear

       
      Features & Details
      BluOS Network Streaming with MQA Decoding ESS Sabre DAC Dirac Live Room Correction Gigabit Ethernet Dual Band Wi-Fi AC/N 2 Way Qualcomm aptX HD Bluetooth 2x MDC Slots for Future Expansion MM Phono Input 2x Line Inputs, 2x Optical inputs, 2x Coax Inputs Balanced Preamp Output Preamp Output Stereo Subwoofer Output USB Socket for adding optional Wireless Output Module IR In with Learning Function Trigger In/Out  
      Dirac Live Reviews & Guides
      https://audiophilestyle.com/ca/reviews/dirac-live-2-digital-room-correction-software-walkthrough-r884/
       
      Nad C658 Product Reviews
      https://hometheaterhifi.com/reviews/amplifier/nad-c-658-bluos-streaming-dac-review/
      https://www.soundandvision.com/content/nad-c-658-network-audio-playerpreamplifier-review
      https://www.whathifi.com/reviews/nad-c-658
      https://www.stereo.net.au/reviews/nad-electronics-c-658-streaming-dac-preamp-review
       
      Nad C658 Video Reviews
       
       
    • By j_davis_1980
      Item: NAD C325BEE stereo integrated amp 50 W per ch 8ohms.
      Location:Melbourne (Heidelberg)
      Price: $250 
      Item Condition: good
      Reason for selling: NLR
      Payment Method: Pickup - Cash, COD Only
      Extra Info: A nice sounding amp in good condition. Original remote included. I don’t have the box, hence no shipping. 
       
      Photos:




    • By SpotOn
      Item: NAD C 355BEE Integrated Amplifier
      Location: MEL 3030
      Price: 325 plus postage if required 
      Item Condition:Excellent
      Reason for selling: Upgrade
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Bought this about 10 months ago from another SNA member. Very nice sounding amp and is in excellent cosmetic condition. Comes with original remote and generic power cord.
      Power output: 80 watts per channel into 8Ω (stereo)
      Frequency response: 20Hz to 20kHz
      Total harmonic distortion: 0.02%
      Damping factor: 160
      Input sensitivity: 300mV (line)
      Signal to noise ratio: 98dB (line)
      Dimensions: 435 x 116 x 292mm
      Weight: 8.5kg
       
      Pick up is preferred but can pack safely and post at buyer's cost and risk if required. 
       

      Photos: Advertisements without photos of the actual item will not be approved.





    • By MattyW
      Ok, now that I've had my Wavebourn Edelweiss-3 for a few months and it's nicely burned in it's time for me to prepare writing my review of it which I'll post here over the coming month. I'll post my impressions and experience purchasing this wonderful amp from Anatoliy Lisovskiy, who will be releasing the production series of the Edelweiss-3 power amp, an integrated amp and separate preamp over the course of this year.
       

       
      As I understand it the current production version of the power amp and integrated will all be EL34 though allow and pin compatible tube to be used right through to KT120, possibly even KT150. My own amp on the other hand uses WW2 vintage CV1127 radar sweep tubes.
       
      The reason I initially started looking into a lower powered amp was that 6 months ago I built my first pair of DIY speakers. A pair of shallow cabinet open back speakers which share the performance characteristics of U frame open baffles. Unfortunately the copy darTZeel NHB-108B power amp I was running at the time was far too powerful making my 101db sensitive speakers too loud for regular use so I started investigating lower powered tube amps.
       
      While looking into various solutions someone on AudioKarma pointed me in the direction of Anatoliy's Wavebourn amps and I got in touch via the Wavebourn facebook group. Over the next month or so I had an interesting discussion with Anatoliy about his amps, and their suitabillity to drive my DIY speakers (Lii Audio FAST-10 full range, Aurum Cantus G3Si ribbon, Skar Audio VX1ST bullet & Lii Audio W-15 woofer) and this led to discussions of his amps variable damping factors allowing suitabillity with a wide range of speakers. A feature which I believe may well be unique to the Wavebourn amps.
       
      Overall details of the amp are as follows:
       
      Input: 0 dB (0.775V) RCA, 50K stereo.
      Outputs: low ohm for 4-6 Ohm and high ohm, for 8-12 Ohm load.
      Power: at least 6W for <1% total harmonic distortions.
      Soft asymmetric saturation (inaudible clipping), negative output resistance for damping of woofers (servo-control of speakers).
      Bandwidth: 10 Hz-90 KHz -3 dB, from 20 Hz full power.
       
       
      Tubes:
       
      Raytheon VT127 (CV1127) radar sweep power tubes.
      8CB11 driver/preamp tube (twin video pentode – filament powered from rectified DC for zero audible hum.
      VR150 / Russian SG4S voltage regulator (purple glow).
      VR tube and solid state MOSFET voltage regulation.  The “Edelweiss” series derives it’s name from this. A beautiful flower which grows amongst hard mountain rocks.
      Selectable speaker damping
       
      In order to support different speaker design types such as open baffles, horns, closed and ported boxes, there’s a damping factor switch that controls output resistance of the amplifier.
       Position 1 is the first on the left.
      1.       High output resistance (like pentode output with no feedback), sometimes referred to as "Current driving mode".
      2.       Similar to SET with no feedback.
      3.       SET with some feedback.
      4.       Negative output resistance for active servo-damping of woofers.
       
      With a little experimentation I soon found that I prefer the negative output resistance setting, which is actually Anatoliy's own preference. Probably the least tube like sounding setting giving tight, accurate bass where other modes seem a bit looser. This is what I've continued to use since the first week I received the amp.
×
×
  • Create New...