Jump to content

TECHNICS Pre (SU-C2000) & Power (SE-A5000) Amplifiers


Recommended Posts

Item: TECHMICS Pre (SU-C2000) & Power (SE-A5000) Amplifiers.
Location: Terrigal or North Ryde
Price: !$4800! REDUCED TO: $3950 FOR BOTH AMPS. 
Item Condition: Excellent
Reason for selling: Too big for my new house.
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info: These Technics Pre and Power amps, in short explanation these are Not for the feint hearted, simple.

They are big, bulky and heavy, specially the power amp, as you can see in pics, the power amp has 3 transformers 2 massive ones and one in the middle.  Pictures tells million words, these as you can see in pictures (inside) looks better and cleaner then other amps.

They are in perfect working condition. Both amps have been serviced and cleaned and both works perfect, they appear to be not used much and I also didn't have the chance to use them much either due to renovating and moving to a new home, now they are too big for my new home therefore I have sadly decided to sell them. These Technics amplifiers are perfect match to my Diatone DS-3000 speakers which are also for sale here, however, these Technics amps also performed very well with my B&W 802 Diamond speakers as well.

 

More about the Power amp. 

 

Class AA and voltage control amplifier Block diamond 

class AA  Class AA and electric-current drive amplifier Block diamond 

class AA electric-current drive amplifier   Block diamond 

Rating of a mode

Form       Stereo power amplifier

Output power 240W+240W (4 ohms, 20Hz - 20kHz, 0.002%) 

200W+200W (6 ohms, 20Hz - 20kHz, 0.001%)

THD 0.0007% or less (20Hz - 20kHz-3dB, 8ohms)

Output bandwidth  5Hz - 100kHz (cpo-3dB, 0.01%, 8ohms)

Frequency characteristic      0.8Hz-150kHz+0 -3 dB 

 20Hz-20kHz+0dB-0.1dB

S/N ratio (IHF66)   120dB

Dumping factor      120 (8ohms)

Input sensitivity/impedance 1.2V/47kohm

Meter indication precision    ±3dB (-40dB or more) 

±5dB (less than -40dB)

Power source AC100V, 50Hz/60Hz

Power consumption      400W

Dimensions    Width 484x height 207x depth of 475mm

Weight   34.0kg

Technics SE-A5000      * Build-to-order article 

300,000yen (around the 1990 time)

 

The Pre amp has treble and bass controls which I love most, I know these days some of you may think there is no need for treble & bass controls but in my own opinion sometimes the room cannot fit perfectly with your audio gear even with acoustic sound traps on the walls and floors a little adjustment with treble or bass controls helps a lot to improve the sound without going too much trouble, if not then just leave them in the middle or just press the DIRECT button and you have a pure direct sound without tone controls. Simple. 

 

I can deliver these amps around Central Coast and Sydney if you are Not too far from north Ryde in Sydney or Terrigal in Central Coast.

Simple.

 

 
 
Photos: Advertisements without photos of the actual item will not be approved.

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

12.png

Edited by HiFiPassion
  • Like 6
Link to comment
Share on other sites





I love this Japanese cost no object stuff . 

 The little green caps are actually  copper foil pps caps for audio made by panasonic  , the parent company of  Technics . 

    I was lucky enough to get some from Japan but cant recall seeing them in commercial gear before  . 

   At first glance they look like your  average film cap .

  Just goes to show the refinements that these top Japanese audio products incorporated but go underappreciated .

Link to comment
Share on other sites

Such a beautiful built product from the 80’s.

Many forget that Technics built some superb audio

models during this period.  Similar to my Sony TAN77ES

amp.  Would make a wonderful addition to someone’s system.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...
To Top