Jump to content

Sign in to follow this  
melani

trouble Pairing Sanyo LCD-32XR8DA with Remotec 1279041 universal Remote control (URC)

Recommended Posts

My TV is a Sanyo LCD-32XR8DA  and my Remote control is a -

Remotec 1279041 universal Remote control (URC) - https://www.manualslib.com/manual/140236/Remotec-1279041.html

 

Apparently -the codes written on - https://codesforuniversalremotes.com/universal-remote-control-codes-sanyo-tvs/

are Only 3 pin codes and not 4 as expected by - https://www.manualslib.com/manual/140236/Remotec-1279041.html

-----------------------------------------------------------

So far I been doing the following as suggested by the manualslib remote control website -

 

1. Referring to the DEVICE CODE LIST, look up the 4-digit Device Code which corresponds to the brand of your A/V equipment. If there is more than one Device Code listed under your brand, start from the first code.

2. Press the desired Device Mode Key (e.g. TV).

3. Hold down "CH +" and "VOL -" on the URC simultaneously for 2 seconds until the indicator light under the power key lights up. 4. Use the number keys "0" - "9" to enter your 4-digit Device Code. The indicator should go out after the 4th digit is entered.

--------------------------------------------------------------------

Turn on your device (e.g. TV), then try the function keys on the URC. If your device (e.g. TV) responds to your activated function correctly, you have entered the right Device Code. Otherwise, repeat the above steps with the next available Device Codes until your device (e.g. TV) responds to your activated function, and most keys work correctly

---------------------------------------------------------------------

After trying all codes - :054, 069, 023, 025, 004, 013, 049, 108, 110, 180, 209 -none of them worked - should I give up and get a different Remote control or is there something Im doing wrong ?

 

Edited by melani

Share this post


Link to post
Share on other sites

I had just posted the following response in your Whirlpool query, but you may find it here first...

 

Although I suspect you will resolve your issue, if still no luck, please confirm the make and model number of the remote control?

That is, where did the Remotec 1279041 information come from?

 

Cheers.

 

As per the instruction for this remote control, if you don't have the 4 digit codes for you brand TV, the remote control can be set to automatically step through its built in codes until one works for your TV. (Though it still might not be compatible).

 

Refer to page 2 of instructions under heading By Searching Through Library to put remote control into auto search mode (a bit tedious and it may take quite some time to actually get to the required code though).

 

Hope this helps and you find a solution soon.

 

Cheers.

 

EDIT:


Perhaps this more comprehensive version of user manual with the codes listed may solve your problem....

 

https://www.manualslib.com/manual/1002237/Remotec-Bw-0930.html

 

Sanyo codes: (start with first code, then try each code next if doesn't work fully)
0141 0151 0401 0491 0651 0781 0801 0821 0981 1101 1111 1291 1351 1691 1741

 

God Luck.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Classifieds Statistics


    Currently Active Ads

    Total Sales (Since 2018)

    Total Sales Value (Last 14 Days)

    Total Ads Value (Since March 2020)
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By steven_braith
      Item: Sanyo PLV-Z4 Projector (incl. bulb) with multi-directional ceiling mounting bracket
      Location: St Leonards, NSW 2065
      Item Condition: Boxed in original packaging, was excellent, hasn't been used for 3 years and been in 2 removals since last used (sorry haven't got time to test atm - but will if serious interest)
      Reason for selling: Downsized to 1 B/R Apartment after divorce
      Price: $200 ONO
      Payment Method: Pickup - Cash, Direct Deposit
      Technical specs here
      Please PM me if interested.



×
×
  • Create New...