Jump to content

Sign in to follow this  
EGM Audio

The Best Value Power Cable on the Aussie Market !!!

Recommended Posts

EGM Audio Grey Series V2 - Our Entry Level Power Cable

 

EGM offers the best entry level Power Cable (1.5 M length) available on the Australian market under AUD$100 (RRP). We have done extensive testing, both in Australia and overseas with HiFi Specialists, Designers, and Focused Listing Groups. Our product is comparable to competitors’ cables that retail for over AUD $400!

As always, we are so confident in our products that we offer a 100% money back guarantee.

 

 

PC grey S2

 

Features of our High Grade audiophile power cable:

  • Improves sound and picture quality of audio and AV products

  • EMI/ RFI protective screening

  • 16AWG 3 core, 99.999% OFC pure electrolytic copper

  • Designed and Made in Australia—230v AS/NZ Standard with IEC C13 or IEC C7 Plug Top

  • 5 Year Warranty

EGM Audio Hi-Fi Audio Power Cable: Grey Series V2

This Hi-Fi Audio Power Cable is part of EGM Audio's Grey series and it is the perfect entry level power cable. Handmade to offer high quality performance at an affordable price, the tinned copper braid/screen provides superb protection from any external interference from other audio equipment.

Available in a variety of lengths, our sturdy handcrafted cables are a great investment if you’re looking for a long-lasting and efficient power cable! Perfect for home audio set up, our audio power cables are ideal for replacing all your basic power leads with a more adequate cable.

This cable not only delivers excellent performance, it also represents outstanding value for money.

 

 

EGM Audio’s Power Cable Construction:

Construction

  • Layer 6: Nylon Sheath – Outer jacket gives extra protection to the cable.

  • Layer 5: PVC Clear Jacket – This outer PVC jacket helps give the cable axial mechanical strength and resistance, while providing a high degree of flexibility to the cable.

  • Layer 4: EMI/ RFI Screen – Copper Tinned Braided Screening will protect your cable/ audio equipment from external and internal EMI. It is the best level of protection for Audiophile Systems.

  • Layer 3: Inner PVC Layer – This resistance PVC barrier protects the inner cores of the cable from any interference on the EMI screen.

  • Layer 2: Conductor’s PVC Jacket – This special compound electronically extruded evenly around the copper conductors are exclusive to EGM Audio’s Power Cables. It has a very low dielectric, and this remains constant over wide frequency ranges making this the best available on today’s market for Hi-End audio systems.

  • Layer 1: Conductors – 3 core, 99.999% OFC multi strand pure electrolytic copper. Highest purity of copper available for any Audio Equipment on the market.

Available for purchase at Retailers and at http://www.egmaudio.com.au

 


 

Share this post


Link to post
Share on other sites
On 04/03/2019 at 7:08 PM, EGM Audio said:

We have done extensive testing, both in Australia and overseas with HiFi Specialists, Designers, and Focused Listing Groups. Our product is comparable to competitors’ cables that retail for over AUD $400!

I’m interested in the testing. Are you able to share the results ?

Share this post


Link to post
Share on other sites
11 hours ago, Sir Sanders Zingmore said:

I’m interested in the testing. Are you able to share the results ?

The Grey Series V2 Cable was tested on several systems within HiFi Shops, Audio Clubs, Audio Manufacturers and Audio enthusiasts.

Systems/ Equipment we tested against were single source and amps within a price range between $500-$3,500 and complete systems of up to $10,000. We tested our cable against several cables ranging from the standard manufacturers supplied power cable to leading popular manufacturers (RRP $129-$650) cable.

When tested against standard manufacturer supplied power cable, we had a notable difference with improved sound quality 100% of the time.

When tested against power cables RRP $129-$400 price range we had a notable difference to slightly notable better sound quality with our cable being the preferred cable 100%.

When tested against a series of cable in the RRP $400-$650 price range we were the preferred cable-  our cable was either slightly better sounding or on par but a $550 difference in price.

Notable difference feedback received  ranged from lifting the mid-range woofer to notable difference in the back ground sound. It is important to note depending on the equipment/ systems used there will always be different results.

Share this post


Link to post
Share on other sites


@EGM Audio

 

If I may ask. During these tests, were the people informed of the cable changes?

 

Thanks.

Share this post


Link to post
Share on other sites
19 hours ago, Cardiiiii said:

Can you tell us more about the Blue Series cable?

EGM Audio Blue Series V2 Power Cables is currently our most premium cable. (Grey Series is our entry level and our Red Series is Mid-Tier).

It is a heavier gauge cable (12 AWG). During our testing we proved that the cable is suited best on Audio equipment that draws high current e.g. Power Amp & Mono Blocks to get optimal performance.

Share this post


Link to post
Share on other sites
4 hours ago, rantan said:

@EGM Audio

 

If I may ask. During these tests, were the people informed of the cable changes?

 

Thanks.

The Grey Series V2 Power Cable was not blind tested as it over preformed and exceeded expectations over the other power cable. It was designed for a price point of what we believe an entry level power cable should be and what is extremely affordable to all audiophiles.

Share this post


Link to post
Share on other sites
15 minutes ago, EGM Audio said:

The Grey Series V2 Power Cable was not blind tested as it over preformed and exceeded expectations over the other power cable. It was designed for a price point of what we believe an entry level power cable should be and what is extremely affordable to all audiophiles.

 

OK. My question was made in good faith with no hidden intent. Honestly.

I am not, in any way, deriding your product and I have never sought to do so. My question was/is, on what basis was the cable tested and were people made aware at the testing that cables were named as they were changed?

 

Thank you😀

Share this post


Link to post
Share on other sites


1 minute ago, rantan said:

OK. My question was made in good faith with no hidden intent. Honestly.

I am not, in any way, deriding your product and I have never sought to do so. My question was/is, on what basis was the cable tested and were people made aware at the testing that cables were named as they were changed?

 

Thank you😀

And he's answered you.

The cable was not blind tested.

End of story, thanks.

 

More questions should be directed to the Sponsor, by PM, where I'm sure they'll be happy to discuss with you.

Share this post


Link to post
Share on other sites

Would you do these in custom lengths? When I get set back up somewhat properly later this year (hopefully this year anyway) I was planning to build a handful of leads ranging from 50cm to 1.5m, as I don't want a pile of excess lead hanging around behind the gear. 

Share this post


Link to post
Share on other sites
58 minutes ago, Gremrock said:

Would you do these in custom lengths? When I get set back up somewhat properly later this year (hopefully this year anyway) I was planning to build a handful of leads ranging from 50cm to 1.5m, as I don't want a pile of excess lead hanging around behind the gear. 

They have 0.5m, 1m, 1.5m.

Share this post


Link to post
Share on other sites


I actually spotted that after I posted and I went looking. Probably want a bit more custom when I'm ready, but will see. Can always make my own if I have to, but for under $100 a lead its easier just to buy them lol

 

Share this post


Link to post
Share on other sites
On 04/03/2019 at 6:08 PM, EGM Audio said:

As always, we are so confident in our products that we offer a 100% money back guarantee. 

Does that money back guarantee apply to all your products, including your speaker cables? Just wanted to ask because I've never seen anyone offering that in audio.

Share this post


Link to post
Share on other sites
11 hours ago, Gremrock said:

Would you do these in custom lengths? When I get set back up somewhat properly later this year (hopefully this year anyway) I was planning to build a handful of leads ranging from 50cm to 1.5m, as I don't want a pile of excess lead hanging around behind the gear. 

We offer the following Lengths: 0.5metre, 1.0 metre, 1.5 metre, 2.0 metre, 2.5 metre, 3.0 metre, 4.0 metre & 5.0 metre.

Longer custom lengths are available please email us sales@egmaudio.com.au

Share this post


Link to post
Share on other sites
7 hours ago, Suopermanni said:

Does that money back guarantee apply to all your products, including your speaker cables? Just wanted to ask because I've never seen anyone offering that in audio.

Yes, we offer 100% money back on all our products.

Share this post


Link to post
Share on other sites


4 hours ago, EGM Audio said:

Yes, we offer 100% money back on all our products.

 

 

 

That's great, hope to try your products one of these days!

Share this post


Link to post
Share on other sites
On 06/03/2019 at 7:12 PM, EGM Audio said:

EGM Audio Blue Series V2 Power Cables is currently our most premium cable. (Grey Series is our entry level and our Red Series is Mid-Tier).

 

It is a heavier gauge cable (12 AWG). During our testing we proved that the cable is suited best on Audio equipment that draws high current e.g. Power Amp & Mono Blocks to get optimal performance.

 

Which cable would you recommend for a network streamer and DAC? I'm assuming the blue series is best for pre/power amp?

Share this post


Link to post
Share on other sites
17 hours ago, Cardiiiii said:

Which cable would you recommend for a network streamer and DAC? I'm assuming the blue series is best for pre/power amp?

We would recommend our Red Series V2 Power Cable for DAC/ Streamers.

 

Pre/Power we would recommend our Blue Series V2. (Note: Being a heavier gauge cable we recommend purchasing the next size/length (0.5 metre) to accommodate for bends ect.)

 

http://www.egmaudio.com.au/product-category/hi-fi-audio-power-cables/

 

Share this post


Link to post
Share on other sites

G'day all. About 6 months ago, Mike Lenehan [the speaker and  speaker cable magician] introduced me to the world of HiFi power cables via EGM Audio. He lent me some red series cables to try on my system. I went home and with skepticism plugged them in from my Nordost QB4 to my Prima Luma HP valve amp. I noticed a difference straight away. More definition and clarity, and this power cables was brand new out of the packet, not run in at all. I have since thrown all my cheap little power cables [ that always come with pricey components] away and replaced them all with EGM red series power cables. A huge improvement for such a small financial outlay. To me, It,s a no brainer.

That was until last week, when I called in on Mike again. He showed me the brand new brown cable made by EGM audio. He asked me to take the sample cable home, give it a go and tell him what I thought. Well, after playing Earl Klugh, Janis Ian and Dire Straits, I phoned Mike up and to quote Darren 69, I said," Mike Lenehan, you're a bastard". Just when I thought that my system was about as good as it could get. Yes, the red series cables are fantastic, but the new brown ones [that I believe will be introduced at the HiFi show in Melbourne in October] are at another level again. Much more detail and clarity. If you're going to the Melbourne HiFi show, check these beauties out as well as Mike Lenehan's ML2 speakers and foilflex cables. You won't be sorry.

BTW, my system consists of Rega P8 tt with the Aphita 2 mc cart, Rega aria phono stage, Prima Luma Dialogue Premium HP amp, with the Lenehan caps and resister upgrade, Rell T9 sub, Lenehan ML2 ref speakers and stands, Nordost power filter/powerboard, foilflex speaker cables and interconnects, EGM power cables and Quadraspire Evo4 HiFi rack.

Do I love my system? Bloody oath I do. Cheers Warwick.

PS. Sorry for the long winded rant!!!!

Share this post


Link to post
Share on other sites
21 hours ago, Suopermanni said:

Well, that's interesting. Might give one a try.

I highly recommend that you do. I can't believe the difference that it has made. Cheers Warwick.

Share this post


Link to post
Share on other sites
On 06/08/2019 at 8:47 AM, Warwick Robson said:

I highly recommend that you do. I can't believe the difference that it has made. Cheers Warwick.

I snapped one up at the show. Will find out for myself soon enough.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By lordvader82
      Item: DIY VH Audio Flavour 2 power cable (6 feet - Furutech terminated)
      Location: Melbourne
      Price: $240 for the power cable. Free postage.
      Item Condition: Used
      Reason for selling: No longer required
      Payment Method: Paypal
      Extra Info:
       
      DIY VH Audio Flavour 2 Power cable Followed the recipe here:
      DIY Power Cord
      WWW.VENHAUS1.COM Build your own Audiophile Power Cord  
      Cable uses furutech connectors
      FI-AU3112 Rhodium on the mains end. FI-11 Gold on the IEC end The connectors over most of the cost (feel free to salvage for parts!)
      This cable is too long for my current needs, and due to the tricky angle I need, I'll be better off building a new cable.
       
      ELECTRICAL DISCLAIMER
      This product has not been manufactured by a qualified individual or company, therefore contains electrical circuits that do not necessarily comply with Australian Standards. I understand that as the seller, I may be liable to repercussions in the event of equipment failure. By advertising and selling this product, as the seller I also agree that I am solely liable, and the publisher of this website takes no responsibility for any injury or death resulting from, whether directly or indirectly, any accident that may happen as a result of the failure of the product being sold. If in doubt, seek the services of a qualified electrician to inspect the product to ensure it is safe for use.

       
      Photos:
       

       

       

    • By lordvader82
      Item: 1 pair of terminated Canare 4S11 (6 feet) and 1 DIY VH Audio Flavour 2 power cable (6 feet - Furutech terminated)
      Location: Melbourne
      Price: $80 for the speaker cable, $260 for the power cable. Free postage.
      Item Condition: Used
      Reason for selling: No longer required
      Payment Method: Paypal
      Extra Info:
       
      Canare 4S11 Speaker cable
      These are spade terminated (copper), and, since moving, are the wrong lengths (can't cut a cable longer!).
      Have actually replaced these with another pair of 4S11 cables!
       
      DIY VH Audio Flavour 2 Power cable
      Followed the recipe here:
      DIY Power Cord
      WWW.VENHAUS1.COM Build your own Audiophile Power Cord  
      Cable uses furutech connectors
      FI-AU3112 Rhodium on the mains end. FI-11 Gold on the IEC end The connectors over most of the cost (feel free to salvage for parts!)
      This cable is too long for my current needs, and due to the tricky angle I need, I'll be better off building a new cable.
       
      ELECTRICAL DISCLAIMER
      This product has not been manufactured by a qualified individual or company, therefore contains electrical circuits that do not necessarily comply with Australian Standards. I understand that as the seller, I may be liable to repercussions in the event of equipment failure. By advertising and selling this product, as the seller I also agree that I am solely liable, and the publisher of this website takes no responsibility for any injury or death resulting from, whether directly or indirectly, any accident that may happen as a result of the failure of the product being sold. If in doubt, seek the services of a qualified electrician to inspect the product to ensure it is safe for use.

       
      Photos:

       

       

       

       

    • By Arv
      Item: Zion Power Cable
      Location: Sydney
      Price: $130 + delivery Price drop - $120
      Item Condition: Very Good - Used
      Reason for selling: NLR
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Zion power cable with upgraded IEC Furutech Gold. It is 1.5m long.
      Was using with my Pre-Amp and a step up from the original cable.
       
      I have the original box and able to post at buyers expense.
       
      Photos: Advertisements without photos of the actual item will not be approved.


    • By Jventer
      Item: XLO Reference 2 power cable x 2, 1.8m, with Oyaide (US) plugs
      Location: Grafton NSW
      Price: $450 for both or $240 each
      Item Condition: Used, but in very good condition.
      Reason for selling: Downsizing
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      I am a huge XLO fan.   I started with interconnects and then bought speaker cables and power cables as I wanted a complete loom of XLO cables.  
      These power cables was purchased from a respected SNA member a few years ago.
      Now selling these and various other items as I am downsizing/simplifying.
       
      The Oyaide plugs: The P-046 is a US plug - currently the price for that is $102. The C-046 is a normal IEc plug. Currently the price is $96.
       

       
      Photos: Advertisements without photos of the actual item will not be approved.



    • By Dokken
      Item: Nordost Norse Series Heimdall Rev 2 Power cable - 1m length with factory fitted Australian AC plug
      Location: EPPING  VIC  3076
      Price: $445 including free postage (donation to be made to SNA upon sale)
      Item Condition: Very good (see pics below)
      Reason for selling: No longer required
      Payment Method: Pickup - Cash, Bank Transfer or Paypal (nb. only using the Friends and Family payment option)
      Extra Info:
      This is a dealer demo version (nb. hence the green shrink wrap on the IEC connector end) that was purchased from Carlton Audio Visual (an authorised Nordost retailer in Melbourne) in late August 2018.
      The current RRP for a new 1m Nordost Heimdall 2 power cable is $895 (https://addictedtoaudio.com.au/products/nordost-heimdall-revision-2-power-cable)
       
       
      Technical Specs:
      Insulation:
       
      Fluorinated Ethylene Propylene (FEP)
      Construction:
       
      Mechanically tuned lay, length and Micro Mono-Filament design
      Conductors:
       
      3 x 16 AWG
      Material:
       
      Silver-plated 99.99999% solid core OFC
      DC Resistance:
       
      4.0 Ohms per 1000ft
      Velocity of Propagation:
       
      85%
       
       
      Photos: Advertisements without photos of the actual item will not be approved.



×
×
  • Create New...