Jump to content

DIY - HiFi Racks - Stands - Cabinets


Recommended Posts

Hello Fellow SNA-ers

 

 

Due to the overwhelming response in a Wanted To Buy Ad for HiFi Racks with members sharing their fantastic and creative DIY Techniques for HiFi Racks & Stands & Cabinets I have decided to create this Topic.

 

Please share your amazing Creations and Ideas and Techniques by posting Photos, Articles and Links and your Comments for HiFi Racks & Stands & Cabinets.

 

You may also like to share your recommendations of professional HiFi Racks & Stands & Cabinets that you have purchased or found informative links to.

 

 

Christopher

Edited by kroozzy
Link to post
Share on other sites
  • Replies 251
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

This is a rack and isolation platforms I designed with consultation and emotional support from my partner. Ross at RTF design did the hard work and built the thing - he’s a real gentleman and patientl

Thought I'd share my story.. Was wanting a new rack to replace my currente entertainment  which was a bit too large now that TV is wall mounted.  This is my first attempt at anything remotel

I have just finished this rack for a member here.Solid jarrah. Each shelf unit can be lifted off for easy access to equipment and is located by horizontal dowels which sit in V grooves routed int

The threaded rod and board method used to make HiFi Racks & Stands & Cabinets is so simple yet effective, i absolutely love it   🤩

Link to post
Share on other sites

Now for a Professional Made HiFi Rack:

 

I have been fortunate and especially privileged to be shown around the Factory of SGR Audio in Melbourne on a Sunday around May 2018.

 

Coming from a Trade & Industrial background i was surprised and amazed, yet proud, that us Aussies are creating World Class Products at well above World Standards.

 

I thought i was a perfectionist, and everyone that knows me and my work know that i am particularly OCD on quality, though Stuart, the Founder & Creative Intellect of SGR Audio along with his Father have made me proud that i am not alone on achieving perfection.

 

SGR Audio's HiFi Racks may be slightly priced outside some of our budgets, and yes 'my budget' to, though allow me to emphasize the Craftsmanship, Technology and Machinery used to manufacture SGR HiFi Racks is on par with Bentley Automotive Standards.

 

It is the old saying, "you get what you pay for", and i personally believe you get way more than what you pay for with SGR Audio Racks.

 

 

Stuart will not remember me, so i will ad i am the guy that does Kitchen Glass Splashbacks, that will refreshen his memory  🙂

 

 

  • Like 1
Link to post
Share on other sites


Oh ok then. 30x30x3mm tubing, welded, filled and sealed with outboard spikes and thick polished acrylic shelving.ad_0_1491356776435.jpg

  • Like 10
Link to post
Share on other sites

What would such a beast cost Grizzly? I am fed up of using an old TV cabinet for my stereo. 

Is it wide enough for 2 TTs.

 

Link to post
Share on other sites
Quote
39 minutes ago, Grizzly said:

Oh ok then. 30x30x3mm tubing, welded, filled and sealed with outboard spikes and thick polished acrylic shelving.

what a great looking rack!   😉

 

  • Like 1
Link to post
Share on other sites
18 minutes ago, Batty said:

What would such a beast cost Grizzly? I am fed up of using an old TV cabinet for my stereo. 

Is it wide enough for 2 TTs.

@batty not wide enough for 2 turntables, unless they are very small, width is 800mm on this one but it can be made any size 

I would think, tho it does get heavy! 

IMG_0424.JPG

  • Like 7
Link to post
Share on other sites


8 hours ago, peterpan said:

@batty not wide enough for 2 turntables, unless they are very small, width is 800mm on this one but it can be made any size 

I would think, tho it does get heavy! 

IMG_0424.JPG

 

 

Nice HiFi Rack, is the paint used the type that settles to form a texture as it dries ? 

 

I forgot the name of it as i have not used it for a long time.

 

Also noticed the JLTI Modded Oppo, i have the latest 4.2 + ACB   🙂

 

 

Link to post
Share on other sites
1 hour ago, kroozzy said:

Nice HiFi Rack, is the paint used the type that settles to form a texture as it dries ? 

you probably will have to ask grizzly that question he made it for me a while ago, I believe it is powder coated antique black? 

1 hour ago, kroozzy said:

Also noticed the JLTI Modded Oppo, i have the latest 4.2 + ACB

mine is 3.1? have had it a few years now. always wondered how much better 4.2 was but I mainly listen to vinyl these days 

and it sounds pretty nice anyway, 

how are you finding the Oppo?

  • Like 1
Link to post
Share on other sites
 
 
Nice HiFi Rack, is the paint used the type that settles to form a texture as it dries ? 
 
I forgot the name of it as i have not used it for a long time.
 
Also noticed the JLTI Modded Oppo, i have the latest 4.2 + ACB   [emoji846]
 
 
Its a powdercoat but yes has a wrinkly finish with a tiny bit of silver through it from memory
  • Like 1
Link to post
Share on other sites
2 hours ago, peterpan said:

you probably will have to ask grizzly that question he made it for me a while ago, I believe it is powder coated antique black? 

mine is 3.1? have had it a few years now. always wondered how much better 4.2 was but I mainly listen to vinyl these days 

and it sounds pretty nice anyway, 

how are you finding the Oppo?

The Oppo 4.2 is great, i have upgraded to a Bricasti M1 DAC now, which is another level

  • Like 1
Link to post
Share on other sites


On 20/07/2018 at 7:27 PM, kroozzy said:

..., is the paint used the type that settles to form a texture as it dries ?

I forgot the name of it as i have not used it for a long time....🙂

Apart from the nice powercoat that Grizzly refers to, the other paint with the textured finish is called "hammertone", and it can be bought in different colours.  Very popular in the 1950's and similar decades.  Always looks great to me, is often found on idler turntables. 

  • Like 1
Link to post
Share on other sites

Here's the links to the TNT Audio DIY racks based on the threaded steel bars

I would suggest using hardwood ply or bamboo for the shelves, as these have reportedly much better acoustic properties in comparison to glass and mdf.

 

http://www.tnt-audio.com/clinica/flexye.html

http://www.tnt-audio.com/clinica/flexyfaq_e.html

  • Like 2
Link to post
Share on other sites
10 hours ago, audiofeline said:

Here's the links to the TNT Audio DIY racks based on the threaded steel bars

I would suggest using hardwood ply or bamboo for the shelves, as these have reportedly much better acoustic properties in comparison to glass and mdf.

 

http://www.tnt-audio.com/clinica/flexye.html

http://www.tnt-audio.com/clinica/flexyfaq_e.html

thank you for the links  👍

  • Thanks 1
Link to post
Share on other sites

This is a rack and isolation platforms I designed with consultation and emotional support from my partner. Ross at RTF design did the hard work and built the thing - he’s a real gentleman and patiently incorporated my learnings and tweaks into the final drawing, enabling me to get it just right.

 

It’s made of Australian Blackwood throughout and the footers between it and the floor and stillpoints ultra  SS. There are actually nine isolation platforms (to enable inevitable upgrades and expansion).

 

Isolation spikes, footers and bases are all RDC (I’ve just placed an order in the UK to make this all the same size and spec).

 

The speakers are a stop gap and I’ll put in full size floor standers with monobloc amp, eventually.

D29F0EF0-18F4-48C9-9BFD-CA04124A05AB.jpeg

  • Like 21
  • Love 2
Link to post
Share on other sites


1 hour ago, realysm42 said:

This is a rack and isolation platforms I designed with consultation and emotional support from my partner. Ross at RTF design did the hard work and built the thing - he’s a real gentleman and patiently incorporated my learnings and tweaks into the final drawing, enabling me to get it just right.

 

It’s made of Australian Blackwood throughout and the footers between it and the floor and stillpoints ultra  SS. There are actually nine isolation platforms (to enable inevitable upgrades and expansion).

 

Isolation spikes, footers and bases are all RDC (I’ve just placed an order in the UK to make this all the same size and spec).

 

The speakers are a stop gap and I’ll put in full size floor standers with monobloc amp, eventually.

D29F0EF0-18F4-48C9-9BFD-CA04124A05AB.jpeg

 

Nice Cabinet and special praise for the research and efforts to co-ordinate and manufacture the piece of art.

 

To the untrained person your cabinet looks like any other piece of furniture, but to others who read your description, google a little, they will quickly learn it is a quality cabinet.

 

  • Like 1
  • Love 1
  • Thanks 1
Link to post
Share on other sites
5 minutes ago, musicmc said:

DIY Rack, built a while ago, well actually 2 one on top of the other

IMG_0081.JPG

Not to miss the point of this thread, but that’s a beautiful job of cable dressing you’ve done there. 

 

This is next in on my list.

  • Like 2
  • Love 1
  • Thanks 1
Link to post
Share on other sites
1 minute ago, realysm42 said:

Not to miss the point of this thread, but that’s a beautiful job of cable dressing you’ve done there. 

 

This is next in on my list.

Thanks, still more to do though. Ran out of velcro ties waiting on some more.

  • Haha 1
Link to post
Share on other sites
23 minutes ago, musicmc said:

DIY Rack, built a while ago, well actually 2 one on top of the other

 

 

awesome, i will be building them in the next 1 or 3

  • Like 1
Link to post
Share on other sites

Enjoy owning that racking system. Made from 16mm all thread and 25mm construction ply with 2 coats of road case finish called DuraTex. The ppl at Bunnings even cut the ply to size, 600mm x 420, which worked well in the whole sheet, minimal waste.

It's adjustable, which is important for a growing system

Found that rubber feet from Bunnings fitted the all thread perfectly, so ended up stacking the racks with no problem.

 

  • Like 1
Link to post
Share on other sites
36 minutes ago, realysm42 said:

Not to miss the point of this thread, but that’s a beautiful job of cable dressing you’ve done there. 

 

This is next in on my list.

 

absolutely a part of the thread though is forgotten about, but great to included, hopefully more will be shown   👍

Link to post
Share on other sites

And for those contemplating constructing the threaded rod racks, consider concealing the threaded rods so they look less "industrial" .  Ideas include putting a tube around them, or building a wooden box around them. 

Link to post
Share on other sites

@audiofeline

True, the all threads are industrial looking and to be honest easily damage a heavy piece of kit if you happen to knock it it on the way in. Did procrastinate about that for quite some time trying to cover/box, leave out the top nut and washer for each shelf.

 

Because it needed to house quite a pile of gear, 6 power amps, DSP, PC and so on best I could come up with was to paint them black. Painting the nuts and washers didn't go well either and ended up using galvanized, looks way better than zinc.  Leaving out the top nut and washer exposed the hole in the middle shelves, not petty. Top shelf though, drilled and tapped the thread and counter sunk the shelf for snug fitting bolts which came up well.

 

Next time would employ a tube rather than a thread and fix the shelves in position somehow possibly drilling the tube and inserting a brass dowel or similar. Would eliminate the nut washer arrangement. Improve the ventilation also by cutting holes in strategic places through each shelf would be a winner .

 

Peace

 

 

Edited by musicmc
poor grammar
  • Like 3
Link to post
Share on other sites
  • Administrators

Here's the Flex rack I made back in 2013. An era when I had a lot more time on my hands!

 

IMAG0124.jpg

 

 

I ended up giving this one away when I moved to Solid Tech Hybrid to cope with my ever changing line-up. Solidsteel has won me over now though as a realistically priced solution that is modular and comes in many configurations without breaking the bank.

  • Like 11
  • Love 1
Link to post
Share on other sites

browsing through DIY jobs on pinterest always leaves a bad aftertaste knowing for us to do the same job we need to spend way more in most cases....if it was possible in the first place!

  • Haha 1
Link to post
Share on other sites
10 minutes ago, Happy said:

browsing through DIY jobs on pinterest always leaves a bad aftertaste knowing for us to do the same job we need to spend way more in most cases....if it was possible in the first place!

Some are easy.  Others definitely require skill which some people have.  They are good for inspiration and in most instances doable.

John

Link to post
Share on other sites
  • 2 weeks later...

Knocked this up this morning, pretty happy with it.

Ikea have the bamboo shelves, stainless threaded rod with some rubber washers from the bolt shop

Spikes from ebay. I've ordered stainless dome nuts for the top shelf so it doesn't look so industrial

Squash balls cut in half isolate the pre from the shelf

Cost me around $200

thumbnail_IMG_5101.jpg

thumbnail_IMG_5102.jpg

thumbnail_IMG_5103.jpg

thumbnail_IMG_5104.jpg

thumbnail_IMG_5105.jpg

Edited by Brad24
  • Like 11
Link to post
Share on other sites

Building a new stereo stand, I've finally settled on a design, this is drawing version 9.  All fasteners will be hidden, see detail in upper right corner of drawing.

 

1_Stereo_Stand.png

 

Verticals are turned red oak that will have a thin sleeve of 304 stainless steel tubing over the wood for accent.  Fasteners are 3/8" bolts for top and 3/8" threaded rod with nuts for lower section due to length needed.

 

Stereo_Stand_Parts_3.jpg

 

Shelves are constructed of 2 layers of ¾" quarter sawed red oak plywood laminated together with glue and small finish nails from bottom side, edges are faced with 3/8" solid red oak.

 

Shelves.jpg

 

Stain tests are next on list, going to mix walnut and golden oak stain colors in differing proportions until I get proper color.  Finish will be Epifanies CV1000 clear varnish.

 

More to come as this project progresses, critique and comments welcomed!

 

 

  • Like 6
Link to post
Share on other sites
4 minutes ago, Antipodean Brad said:

An intriguing design.  I am definitley looking forward to the finished product.  Thanks for posting.  And welcome to Stereonet.

Thank you for the welcome and nice comment on my design.  Regards, Mark B

Link to post
Share on other sites
6 hours ago, FrostEOne said:

Stain Tests - I think I like the second from right, Special Walnut over Golden Oak best

Yep...me to...I prefer a lighter stain...

  • Like 1
Link to post
Share on other sites
22 hours ago, Rob181 said:

Yep...me to...I prefer a lighter stain...

I think the golden oak first adds some real character and depth to the final look after the special walnut which isn't there without it

 

Like your sig, I feel the same way!

Edited by FrostEOne
duplicate text
  • Like 1
Link to post
Share on other sites
1 minute ago, Rob181 said:

Please post the build progress...

Looking forward to watching it come together...

Will do a few pics as finish develops, a feature of this design is pieces can all be finished before final assembly.

 

Kind of like a home built flat pack? :)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By robes
      Item Condition: Very Good Shipping Options: Pickup available but audition is not available. Suburb or Town: Ryde State: NSW Payment Method: Cash on pickup, Paypal Reason for selling: NLR Further information:
       
      KEF LS50 speakers with stands, ready to go to a good home 
       
      Both items are in very good condition as pictured, stands have couple of minor marks on base. 
       
      Not sure as to the model of the stands - they are half-filled with sand so heavy to lift! 

      Photos:
       
      PLEASE READ
      If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved




    • By robes
      Item Condition: Very Good Shipping Options: Pickup available but audition is not available. Suburb or Town: Ryde State: NSW Payment Method: Cash on pickup, Paypal Reason for selling: NLR Further information:
       
      KEF LS50 speakers with stands, ready to go to a good home 
       
      Both items are in very good condition as pictured, stands have couple of minor marks on base. 
       
      Not sure as to the model of the stands - they are half-filled with sand so heavy to lift! 

      Photos:
       
      PLEASE READ
      If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved  




       

    • By ozo
      Item Condition: Very Good Shipping Options: Pickup available and you can audition. Suburb or Town: Wantirna State: VIC Payment Method: Cash, Paypal F&F, Payid Reason for selling: No Longer Required Further information:
      No longer required as I sold the speakers. Come with the original spikes and rubber feet (installed).
       
      Product Details:
      Includes integrated cable management. Sand-fillable for mass loading to improve performance. Mounting holes for CM1 S2, CM5 S2 and CM6 S2 models. Product Dimension (H×W×D)     560 x 252 x 298 mm (ea), top plate is 16x22cms Product Weight     5.5 Kg (ea)
      https://www.digitalcinema.com.au/bowers-wilkins-fs-cm-speaker-stands-pair.html
      Retail price 899.
       
      Photos:
       
      PLEASE READ
      If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved










    • By robes
      Item Condition: Very Good Shipping Options: Pickup available but audition is not available. Suburb or Town: Ryde State: New South Wales Payment Method: Cash on pickup, Paypal Reason for selling: NLR Further information:
       
      KEF LS50 speakers with stands, ready to go to a good home 
       
      Both items are in very good condition as pictured. Not sure as to the model/name of the stands - they are half-filled with sand so heavy to pickup!

      Photos:
       
       
      PLEASE READ
      If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you don't include photographs of the actual item being sold, your ad will not be approved




    • By diamonds71
      Item: Sonus Faber Stands for Cremona Auditor speakers 
      Price Range: $300 neg dep condition 
      Item Condition: New or Used
      Extra Info: I am after a pair of stands for Sonus Faber Cremona Auditor speakers 
      new or used 
      neogtiable on price depending on condition 
       
      Please don't forget to report your post as FOUND when possible. (You can now delete this text).



×
×
  • Create New...