Jump to content

jkn

Satori 2018

Recommended Posts

Posted (edited)

Bliesma T34A - Tweeter

SB Acoustic (Satori) -2 of 6 1/2" MR16 PNW-8 Midrange

SB Acoustic (Satori) -2 of 9 1/2" WO24P-8 Bass

propose_finish_narow_bps_side2.jpg

 

tw_01.jpg

 

tw_03.jpg

 

mid_01.jpg

 

mid_03.jpg

 

b_01.jpg

 

b_02.jpg

 

b_03.jpg

 

propose_finish_narowsideconcretebps_2.jp

 

ply.jpg

 

ply_01.jpg

 

ply_02.jpg

 

propose_finish_narowsideconcretebps_1.jp

 


 

Edited by jkn

Share this post


Link to post
Share on other sites

Looking good. Are you going to port the WO24P’s and seal the mids? Are you designing your own crossover. I have been looking at the Satori for my next project. The specs and build quality look impressive. Will be interested how you go...

Share this post


Link to post
Share on other sites

Hi Mike.. all enclosures will be sealed incl.WO24P Eventually It will be used in 4 way active. Drivers build looks impressive

Share this post


Link to post
Share on other sites

I am building something similar except with the sub in the same enclosure at the bottom. I ended up dropping out the bottom 24P (equivalent) as it all started to get too tall. Are you getting around this by putting the sub/lower base in a different box?

Share this post


Link to post
Share on other sites

I will use my existing set up for the bass 

final_p.jpg 

Share this post


Link to post
Share on other sites

mat_02.jpg

 

mat_05.jpg

 

mat_07.jpg

Share this post


Link to post
Share on other sites


Posted (edited)

HF enclosures

tw_conrete.jpg

tw_conrete_02.jpg

tw_red.jpg

Bass enclosures 

leg_lining_01.jpg

leg_lining_05.jpg

Mid Range Enclosures

mid_01.jpg

mid_02.jpg

Edited by jkn

Share this post


Link to post
Share on other sites

Watching with interest as I'm about to attempt my first build. What sort of ply are you using? Is that just form ply? ta 

Share this post


Link to post
Share on other sites

Hi Cam 

yes, it is 17mm form ply I decided to use it as HF/MF and Stand is fully or partly filled with concrete there is another 18mm ply going to be fit all over so the form ply is used for an Internal enclosure only

J      

Share this post


Link to post
Share on other sites
Posted (edited)

Mid Range enclosures 

mid.jpg

 

Stand & feets 

sta_01.jpg

sta_02.jpg

stand_2.jpg

 

Edited by jkn

Share this post


Link to post
Share on other sites

Looking good J. Can I come and have a listen when they're done?

Share this post


Link to post
Share on other sites
13 hours ago, jkn said:

Hi Cam 

yes, it is 17mm form ply I decided to use it as HF/MF and Stand is fully or partly filled with concrete there is another 18mm ply going to be fit all over so the form ply is used for an Internal enclosure only

J      

I was wondering what you were filling that enclosure up with, now that's mass loading.

 

 

Share this post


Link to post
Share on other sites


10 hours ago, niss_man said:

Looking good J. Can I come and have a listen when they're done?

Hi, Simon, I'll be hosting gtg when they are done will let you know The other layer of 18 Ply is around 4 weeks away !!

J

Share this post


Link to post
Share on other sites

Always been very curious about the larger Satori drivers. Would be nice to build a small 2 way with the 9.5"driver. Your designs always seem to be very fun and interesting.

Share this post


Link to post
Share on other sites
9 hours ago, chrapladm said:

Always been very curious about the larger Satori drivers. Would be nice to build a small 2 way with the 9.5"driver. Your designs always seem to be very fun and interesting.

Hi the biggest Satori midbass driver is 7½" MW19PNW-8 for 2way .I'm thinking to build a bookshelf similar to M8audio maxwell model I think they look awesome https://m8audio.com/product/sweet-maxwell/

 

Share this post


Link to post
Share on other sites
11 hours ago, chrapladm said:

small 2 way with the 9.5"driver

You'll need a horn to meet it, or a 3way.

Share this post


Link to post
Share on other sites
3 hours ago, davewantsmoore said:

You'll need a horn to meet it, or a 3way.

What is the highest the 9.5" can be used?

4 hours ago, jkn said:

Hi the biggest Satori midbass driver is 7½" MW19PNW-8 for 2way .I'm thinking to build a bookshelf similar to M8audio maxwell model I think they look awesome https://m8audio.com/product/sweet-maxwell/

 

I thought the 9.5" you had shown was usuable. I dont know very much on the Satori brand. Been wanting to build a small design using Satori drivers and possibly a Beyma TPL150H

 

Share this post


Link to post
Share on other sites


22 minutes ago, chrapladm said:

What is the highest the 9.5" can be used?

That's a complex question.   Depends on what shape coverage pattern you want ....  it would be hard to balance with a typical 1" dome tweeter (hence the 'horn' comment).

 

22 minutes ago, chrapladm said:

I thought the 9.5" you had shown was usuable. I dont know very much on the Satori brand. Been wanting to build a small design using Satori drivers and possibly a Beyma TPL150H

That could work.

Share this post


Link to post
Share on other sites

If 3 way I do have some PHL 3451 mids that are sitting on a shelf. But may try and use those 10" mids for another build. 2 way sounds like a nice starting plan.

 

JKN where do you buy your Satori and PHL drivers from?

Share this post


Link to post
Share on other sites

Beyma TPL150H usable FR 800HZ

I don't think that will work properly with the 10" drivers I'm using 

 

I usually get  PHL from PAT war audio  and Satori from WES

Share this post


Link to post
Share on other sites
Posted (edited)

Bass Enclosures

b_01.jpg

b_03.jpg

Midrange

mid_4.jpg

Stand

stand_9.jpg

stand_10.jpg

 

Edited by jkn

Share this post


Link to post
Share on other sites

More detials about the boxes?

 

It looks like in some of the pics they have multiple chambers

Steel/bolts in the last pic, etc?

Share this post


Link to post
Share on other sites
Posted (edited)

Hi Dave here are the updated sketches the grey areas represent concrete fill 

The bolts are for support of the threaded inserts inside the concrete box (stand)

propose_finish_narowsideconcretebps_1.jp

 

 

Edited by jkn

Share this post


Link to post
Share on other sites


Posted (edited)

propose_finish_narow_bps_side.jpg

Edited by jkn

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×