Jump to content

Sign in to follow this  
Johnny_Boy

WITHDRAWN OR RELISTED: FS: JVC X3 Projector

Recommended Posts

Item: JVC X3 Projector
Location: Perth, Woodvale
Price: $1,300
Item Condition: good, minor cosmetic scratches. Hard to see under normal light. 
Reason for selling: funding a projector upgrade 
Payment Method: Pickup - Cash, EFT, PayPal + fees, (local pickup only due to no original box)
Extra Info: had some issues with this projector including the dreaded two red lights, one light flashing that is problematic with this model. (Caused the unit to not power on and lens cover to remain open). Have since replaced the ballast and now working well. Also have reversed and replaced the capacitor on the front IR sensor that is problematic with this model. Now works like new and will be a shame to see it go. Come with brand new genuine bulb, currently 1hr on it, but will likely be higher when sold as I will be enjoying some movies before packing away:D

 

 

All functions including power zoom, power focus, lens shift and power lens cover all working well. 

(have receipts for new bulb and ballast purchased last month. Both original from JVC)
 

Can demo working 


Pictures:

Photos taken with iPhone, much better in person. 

 

37779BCF-FBC9-479E-9EEE-81887EE8BB64.jpeg

9467F105-3C11-4817-A9E5-E9982EF02116.jpeg

AEAE9062-5A89-4442-938D-5277E29B2CB0.jpeg

11E728D5-D497-4BE1-A408-E0E81AD7CC7B.jpeg

7AD18F5F-34A1-454B-A430-327ECBF7C8B7.jpeg

Edited by Johnny_Boy
Price change

Share this post


Link to post
Share on other sites

before these inherit x3 problems arose how many hours has the pj been used for?

 

could they happen again on the 2nd lamp?

Share this post


Link to post
Share on other sites

From my research it was originally due to a few problems.

 

- the bulbs/bulb surrounds were of poor quality from JVC, people were getting only 500hrs out of them. This was fixed with the gen2 and gen3 bulb transports. Most people are now getting 2000hrs from the bulbs

 

- IR sensor. This was a manufacturer error in the X3, X7 and X9. The capacitor was soldered on in the wrong polarity (negative side was connected to positive on the board etc). This caused the capacitor to blow over time which stopped the Front IR from working. Some forums suggested that this may have effected the ballast and bulb life but I have no idea about that. Possible. 

 

- Ballast. Again this was a manufacturing defect with poor quality control on ballast testing. The replacement ballasts are of much higher quality. Haven’t heard of anyone replacing the ballast twice. 

 

In terms of usage before issues.It had been through 3 bulbs of approx 1000hrs each. 

 

I don’t think these issues would pop up again given what I have seen online but can’t be 100% on things like this. Happy to provide links to discussions about the issues and fixes etc

 

Cheers

Share this post


Link to post
Share on other sites

Price drop

$1300

 

Now have about 25hrs on the lamp, great image

Share this post


Link to post
Share on other sites


11 minutes ago, Johnny_Boy said:

Price drop

$1300

 

Now have about 25hrs on the lamp, great image

I still have my X3 ... still very happy with it.  GLWTS.

Great value to be had here !

Share this post


Link to post
Share on other sites

This item has been withdrawn from sale or relisted.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Ericcklau
      Price: $350 Item Condition: Like new Shipping Options: Pickup is available Suburb or Town: Turramurra 2074 State: New South Wales Payment Method: PayPal, cash on pickup Reason for selling: Upgrade to GT2000 Further information: JVC JL-A40 turntable in great condition, comes with JVC Z-1S cartridge. Auto stop and return tonearm. 
       100% work in top condition. For local pickup only.

      Photos: Advertisements without photos of the actual item will not be approved.






    • By Minitransit
      Item: Epson EH-TW6600W  3D projector
      Location: Fortitude Valley
      Price: 850
      Item Condition: Perfect
      Reason for selling: No longer Required
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: 
      Projector is in perfect condition. Was purchased new in 2016. 
      Purchased in October 2019 from this forum. The item has not been used or set up and has remained boxed since Oct 2019.
       
      Previous owner installed new lamp and has done 150 hours on it. He had absolutely no issues.
      Only selling because I got a good deal on a Epson 9300.
      Unit is in a wooded crate and safe packing for shipping interstate.
       
      Priced to sell
       
      Projector comes with:
      - 2x 3d glasses unused
      - Wireless module
      - Remote
      - Spare Lamp
      - Power cord
       
      I may be slow to respond to queries as I am travelling for two weeks.
       

       
      Photos: Advertisements without photos of the actual item will not be approved.
    • By mgrobins
      Item: JVC DLA X-35 Projector
      Location: Herston (Brisbane)
      Price: $1100 (price edited after reviewing other information. Sorry for any inconvenience).
      Item Condition: Used - perfect condition
      Reason for selling: lack of use & need to re-purpose HT area
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
       
      Projector is fully functional with only 484hrs on lamp.
      All original parts such as 3D glasses, manual etc are included 
      Original box for safe travel.
      Cosmetically perfect  when wiped down (excuse some fingerprints and dust in image).
       
      Projector info: X-35 Review 
       
      Darbee Doublet 5000 and TP-Link Wireless access point included (WAP is for IP control of projector).
       
      I am selling an Anamorphic lens and screen as well (see advertisements). They are not included with this sale / price. I will happily neg a great price if you purchase them as a package.
       
      Specs:
       
      Brightness: 1,300 Lumens Contrast: 50,000:1 (full on/off) Resolution: 1920x1080 Native Aspect Ratio: 16:9 (HD) Color Processing: 8-bit Projector Size: 18 cm x 45 cm x 47 cm (HxWxD) Weight: 14.8 kg Video Modes: 720p, 1080i, 1080p/60, 1080p/24, 1080p/50, 480p, 480i Data Modes: MAX 1920x1080 3D Modes: Full HD 3D 3D Glasses Type: Shutter Lamp Life: 3,000 hours  / 4,000 hours (eco) Lamp Type: NSH Lamp Wattage: 230 Watts Lamp Quantity: 1 Lamp Code: PK-L2312U Display Type: 2 cm D-ILA (3) Std. Zoom Lens: Powered, 2.00:1 Std. Lens Focus: Powered Optional Lenses: No Lens Shift: Horizontal +/-34.0% & Vertical +/-80.0% Throw Distance: 4.6 m - 6.1 m Image Size: 187 cm - 500 cm Throw Ratio: 1.40:1 - 2.80:1 (D:W) Projector Placement: For a cm diagonal screen, place the projector lens between 3.1 m and 6.2 m from the screen. Digital Keystone: No Audible Noise: ** Speakers: No Max Power: 330 Watts Voltage: 100V - 240V Connection Panel: Component (RCA),  Network (RJ-45),  RS232 (DB-9pin),  12-Volt Trigger,  HDMI 1.4a,  HDMI 1.4a  
       
      Photos: Advertisements without photos of the actual item will not be approved.




    • By surprisetech
      Item:  JVC RX-5022V. 5.1 Channel Dolby Digital/dts/ProLogic II Receiver.
      Location: Gembrook or Knoxfield, VIC
      Price:  $100 +Postage at cost if required.
      Item Condition:  Very good used condition.
      Reason for selling: Deceased estate.
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      One of my father in law's AVRs.  This was the heart of his main system and was still in use until September last year.
      Includes Optical & Coaxial S/PDIF inputs, but no HDMI.
      Very well looked after and fully functional.  Includes original remote control and User Manual.

      Photos: Advertisements without photos of the actual item will not be approved.




×
×
  • Create New...