Audionutz Posted October 25, 2017 Share Posted October 25, 2017 Item: Cyrus III Remote Integrated AmplifierLocation: Gosford NSW Price: $395Item Condition: goodReason for selling: not usedPayment Method: Pickup - Cash, Paypal, COD OnlyExtra Info: Good little amp. Marked with phono inputs but can’t confirm it has a phono stage. Good condition and packs a surprisingly big punch for a smaller unit. The Cyrus III is a conservatively rated 50W per channel integrated amplifier designed to become the core of a quality audio system. Following in footsteps of its well respected Cyrus I & II, the Cyrus III has moved on to address the life style requirements of the 90s as well as having the ability for expansion into a fully integrated audio-visual system. As a first upgrade, a PSX-R will enhance the overall performance of the Cyrus III both in quantity and quality. Cyrus III features high grade SMD components throughout which assist in topology optimisation resulting in shorter signal paths. This is highly desirable in a quality audio amplifier in helping reduce a multitude of complex distortions and adverse interaction with the environment. A major design mandate of the amplifier was the total symmetry of the design. This has been substantially achieved throughout the phono, line and the power amplifier sections. The true symmetry is particularly important in the power amplifier stage, that handles high signal currents, to provide stable image and accurate localisation cues. A sophisticated 180VA toroidal power transformer forms the essential part of the Cyrus III advanced linear Power supply system. The “zero-mechanical-noise” core design of this transformer ensures high performance within an unusually wide AC mains voltage. The patented slotted-foil reservoir capacitors dispel circulating eddy currents in the foil reducing the ESR as well as substantially increasing the effective power supply bandwidth as seen by the amplifiers. Technical Information Electrical Line inputs - 4 + Tape Phono inputs - MM Outputs - Loudspeakers, Tape-out, Preamp-out Power Supply - 180VA Toroidal transformer with 6 regulated rails External - Highly regulated PSX-R upgradeable Communications - MC-BUS™ System BUS Remote Control - Full function remote control facility Specifications Continuous Power - 50W/CH (both driven into 8 Ohms) 70W/CH (both driven into 4 Ohms) With PSX-R - 57W/CH (both driven into 8 Ohms) 90W/CH (both driven into 4 Ohms) Current - 30 Amps peak to peak Distortion - 0.01%, 1kHz (into 8 Ohms) 0.03%, 1kHz (into 4 Ohms) Frequency Response - -3 dB, 2Hz and 80kHz Damping Factor - 100 Sensitivity (50W) - MM: 2.75mV Line: 200mV Input impedance - 10Kohm (RCA), 22Kohm (BAL) Output voltage - 200mV (Tape out), 380mV (Pre out) S/N Ratio - MM: 80dBA (ref. 5mV) Line: 98dBA (ref. 500mV) Dimensions - (H x W x D) 73 x 215 x 360 (mm) Weight - 4.6kg Finish - Black Pictures: Link to comment Share on other sites More sharing options...
Recommended Posts