Jump to content

Sign in to follow this  

SOLD: PMC Twenty 23 floorstanding speakers

Recommended Posts

Item: PMC Twenty 23 floor-standing speakers in walnut
Location: Melbourne
Price: $2300
Item Condition: Very Good
Reason for selling: Upgrade to PMC 26
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info: 
PMC Twenty 23 floor standing speakers. Very good condition. All working perfectly. Come with original packaging. Happy to demo. Will also do a straight swap for a set of PMC Twenty 21 bookshelf speakers.

Crossover Frequency:1.8kHzDimensions:
H 918mm 36.14” (+25mm spikes) W 152mm 6.0” D 330mm 13.0” (+6mm grille)
Drive Units:
LF PMC twenty series,
lightweight doped 5.5”/140mm cone with cast alloy chassis HF PMC/SEAS®,
27mm twenty series, SONOLEX™ soft dome,
Ferrofluid cooledEffective ATL™ Length:2.4m 7.8ftFrequency Response:29Hz – 25kHzImpedance:8 OhmInput
Connectors:2 pairs 4mm sockets (Bi-amp or Bi-wire)
sensitivity:87dB 1w 1m
Weight:13.2kg 29 lbs



Edited by Grieveman

Share this post

Link to post
Share on other sites

....... :fear:

Edited by aasza

Share this post

Link to post
Share on other sites

@aasza mate, wrong spider! But these are the walnut ones....and slightly out of my $2k budget....but thank you!!!!!

Share this post

Link to post
Share on other sites
Just now, spider™ said:

@aasza mate, wrong spider! But these are the walnut ones....and slightly out of my $2k budget....but thank you!!!!!


Ah ok, Your name doesn't come up when members try to mention you because the server doesn't recognize the part in your name

Share this post

Link to post
Share on other sites

This topic is now closed to further replies.
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By DIY freak
      So Im only 15 but Im getting sucked into the DIY hifi and audio stuff. I want to make a medium sized 2.0 stereo system using low end Peerless and Daichi components.
      Is their any advice for when i eventually make these, components etc.
      Im probably going to use 16mm mdf, is that thick enough??
      And what size enclosure and port is suitable for these drivers??
      I was thinking of making the front baffle around the same dimensions as an A4 piece of paper.
      hopefully all good results, with the drivers n all but knowing me lol.
      I have made other speakers before, so don't cut short on the geeky side.
      DIY freak

    • By gypr1961
      Item: Avantgarde Zero 1 XD Active Speakers DSP
      Location: Brisbane
      Price: $18,000 
      Item Condition: Mint
      Reason for selling: Time for a change
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:

      These are the top of the line model, above the pro model and come with DSP, digital and an analogue (A/D card) for turntables etc.
      They are incredibly dynamic! They sound just as good when theyre shaking the house or playing whisper quiet. 
      I have all original packing
      As im going to need a complete new system Im happy to look at trades + cash
      Specs can be found here https://www.avantgarde-acoustic.de/en/products/zero-serie/zero-1-xd.html

    • By Yardbird
      Item: Trevor Lees Floor standing speakers
      Location: Point Cook 3030
      Price: $150
      Item Condition: Used
      Reason for selling: suit someone with better skills than me
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: bought these off another member in poor condition both the cabinets and drivers. They cost a heap more than what I'm now selling for. I have since spent many hours and money getting these going again including a restore on the cabinets themselves. 
      I have replaced all the foam surrounds, dust caps around the drivers and inspected the crossovers and resecured etc. Got the speakers working again but I then broke on wire to the voice coil of one of the drivers (check photo) so I'm over these now.
      An easy fix for someone with the ability. Or a new replacement drive is about $120 local which makes these still crazy cheap. Cabinets are good in condition and this is a quick fix to get a Proac sound. 
      No grills.

    • By olegau
      Item: HiFi stereo system
      Location: Melbourne 3183
      Price: 1200
      Item Condition: very good
      Reason for selling: too many stereo systems
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info:
      Carefully selected Hi-Fi stereo system. All in good condition and working order.
      Separated sale:
      1. ROTEL RA-980BX Integrated Amplifier $390
      The amp was checked and serviced recently.
      It has OP amp sockets, DIYer could change the OP amps to get different sound. Open the the top cover and then change the OP-Amp you like.
      There are three pairs of Ops: original AD712 (vintage sift sound, JRC4558 (modern  more clean and detailed sound) and LM4562 (bit more detaied). Currently installed LM4562. Many other OP-Amp suits for this amp.. 
      Power output: 100 watts per channel into 8Ω (stereo)
      Total harmonic distortion: 0.03%
      Dimensions: 440 x 121 x 347mm
      Weight: 10.1kg

      2. Speakers: Ascension Woodfox Ribbon 822SRTL Bookshelf Speakers. $890
      Dimentions: 500 H, 270mm W and 315mm Depth. Weight is approximately 18kg each. High quality woofer using an Papyrus cone, ribbon tweeter, Rose Mahogany Veneer.
      Two years old.
      Power 120W
      8 ohms
      Sensitivity 91db
      3.  Sold.  Subwoofer: Infinity Primus PS-8 $170
      See spec attached
      Photos: Advertisements without photos of the actual item will not be approved.



    • By Midget
      Item: ELAC FS 247 Floorstanding Speakers
      Location: Terrigal Central Coast NSW (Will ship Australia wide)
      Price: $2400 $1985 + Shipping (includes $20 donation)
      Item Condition: Used. Smoke, pet, child free owner. Very minor micro abrasions on top surface and minor fading to fabric grill, excellent condition.
      Reason for selling: Downsized to a smaller apartment
      Payment Method: Pickup - Cash, Paypal, COD Only
      Extra Info: Each box is 110x40x30cm with a weight of 20.2kg, Made in Germany
      System type 2.5-way Enclosure type Bass-reflex Frequency response ± 3dB 30 - 50000 Hz Nominal impedance 4 Ohm Amplifier Requirements 30 - 250 W Sensitivity (2.83V/1m) 89 dB Tweeter JET III Woofer 2 x 150 mm (6 in.) AS-XR cone Dimensions (H x W x D) 1022 x 170 x 270 mm / 40.24 x 6.69 x 10.63 in. Weight 17,8 kg / 37.4 lbs.  

  • Create New...