JK200SX Posted January 3, 2016 Share Posted January 3, 2016 The lens on this projector is offset to one side, so when you mount this projector on the ceiling do you centre it horizontally to the lens or to the centre of the projector? Reason I ask this is that perhaps the lens already has a horizontal offset built in, to allow for it to be centred horizontally? The lens to the side and the non symmetrical mounting holes on the underside could make for a difficult installation ( I only have one 90mm noggin centred in the roof space for this projector to be attached to). Thanks for any responses? Link to comment Share on other sites More sharing options...
JK200SX Posted January 3, 2016 Author Share Posted January 3, 2016 Sorry Benq w1070 - autocorrect.... Link to comment Share on other sites More sharing options...
hopefullguy Posted January 3, 2016 Share Posted January 3, 2016 (edited) i made my own mounting frame and block for my 1070.. when i mounted it i realised i had to re align it so that the actual lens was centred on the screen.. so it works from the centre. actually when i worked out my positioning at first i forgot it would be mounted upside down.. i had done the measurements from the wrong way up.. haha Edited January 3, 2016 by hopefullguy Link to comment Share on other sites More sharing options...
CAVX Posted January 5, 2016 Share Posted January 5, 2016 This is why I love my shelf mount I can just slide the thing if I need to. Link to comment Share on other sites More sharing options...
Recommended Posts