larry42 Posted March 30, 2014 Share Posted March 30, 2014 (edited) hi, i have got a JVC X3 projector, and want to get a ceiling mount, just wandering what people recommend ? celing mount, extension pipe and flange plate i also need to get a hdmi cable, will do some checking, but about 10-15m long any suggestions ? http://www.amazon.co...eerless prg-unv http://www.amazon.co...eerless prg-unv are good for the mount and pole ? Edited March 30, 2014 by larry Link to comment Share on other sites More sharing options...
sero Posted March 30, 2014 Share Posted March 30, 2014 Can't go wrong with the peerless mate nearly everyone here with a jvc projector uses a peerless. Just find the model that suits your needs. I have 2.4 ceilings and used the one with the extension mount, just to keep the air gap between the projector and ceiling and I also find it is more quite being lower down than if it was hard up on the ceiling! Link to comment Share on other sites More sharing options...
sero Posted March 30, 2014 Share Posted March 30, 2014 Also id measure out the exact distance for Hdmi cable the shorter the run the less handshake issues you will run into.. 15m is pushing it especially if you add in a Darby darblet! Link to comment Share on other sites More sharing options...
larry42 Posted March 31, 2014 Author Share Posted March 31, 2014 I will need a 12m cable, so need to work out what's a good value cable to get What's a Darby Darblet ? Link to comment Share on other sites More sharing options...
tomartomau Posted March 31, 2014 Share Posted March 31, 2014 http://darbeevision.com/darblet From what I have read there are potential issues with the longer cable. I have just purchased a 7.5 from The Cable Connection. Link to comment Share on other sites More sharing options...
sero Posted April 1, 2014 Share Posted April 1, 2014 12m is fine.. The Darby improves picture quality put put it between projector and avr! So if u have a projector>15m Hdmi>Darby>1m Hdmi>avr you can run into Hdmi handshake issues as your ended up with a 16m Hdmi run! Link to comment Share on other sites More sharing options...
larry42 Posted April 1, 2014 Author Share Posted April 1, 2014 mmm. the darby sounds like some sort of aprils fools joke..... i saw this 15m cable on TCC 's site but its out of stock http://www.thecableconnection.com.au/15-metre-HDMI-Cable---TCC-Platinum---High-Speed-with-Ethernet-Full-HD-v14-1080p-Digital.html Link to comment Share on other sites More sharing options...
Quark Posted April 1, 2014 Share Posted April 1, 2014 Ezy HD are another good option for reliable and sensibly priced cables. Link to comment Share on other sites More sharing options...
Markybee737 Posted April 2, 2014 Share Posted April 2, 2014 Larry I bough a 10 metre HDMI from TCC and it is perfect .....room length 5 metres with 2.7 metre wall.... Still have a metre each end running the cable out of the ceiling basically at the rear of the room. The proof will be in the pudding once I set it up in a few weeks Link to comment Share on other sites More sharing options...
Guest maxz2040 Posted April 21, 2014 Share Posted April 21, 2014 I also am looking to upgrade to a FHD setup with new HDMI, my current system in 15m and there is HDMI handshaking issues awry, TCC 15m Cable is out of stock still, I am finding in my research i need a decent cable, can you suggest somewhere i can get on without getting too ripped off. Link to comment Share on other sites More sharing options...
wheelz Posted April 21, 2014 Share Posted April 21, 2014 I also am looking to upgrade to a FHD setup with new HDMI, my current system in 15m and there is HDMI handshaking issues awry, TCC 15m Cable is out of stock still, I am finding in my research i need a decent cable, can you suggest somewhere i can get on without getting too ripped off. As Quark linked ezyhd have great quality affordable cables and other things. http://www.ezyhd-cables.com.au/hdmi-cable.html Link to comment Share on other sites More sharing options...
Recommended Posts