Jump to content

WITHDRAWN OR RELISTED: Price Drop$$$ Bargain Alert True Hi End Complete home theatre System


Recommended Posts

Item:

 

Intergra 80.1 preamplifier ....                AMC2N100  5 channel power amplifier....                   Book shelf Speaker pair SVS MBS-01 Location....       SVS MTS O2 Tower speakers pair....        SVS MCS 02 centre channel speaker.....         SVS PB Ultra 13 subwoofer

Colour black for all items.      

 

Price: $6,500 $6,000.oo COMPLETE SYSTEM Bargain 
Item Condition: Excellent
Reason for selling: My adult children will not move from home so my dream room unavailable for who knows how long.
Payment Method: Pickup - Cash, Paypal, COD Only
Extra Info: I will not separate unless sold all at the same time by a group from stereo net. 
 
Pictures: On request to genuine inquiries. 

 

 

 

 


Extra Info: The MTS 02 tower speakers never used like new just tested. The book shelve SVS MBS 01 Like new but pretty burned in. The centre channel SVS MCS 02 like new and only tested. 

The PB ULTRA 13 sub woofers in very good condition and only used with the small speakers. 

Have two sub woofer. But only one subwoofer comes in this package. 

The speaker are gloss with vinyl finish. 

The sub woofer are like a ruff pebble finish in black,very easy to keep clean. On the back of all the speakers you can adjust to suit room conditions. 

To make these speakers sound good you will need a high current amplifier or a flag ship surround sound with power.

 

Also these SVS speakers where made in the USA not like the new SVS speaker. The speaker are solid as a rock quality built. They really sound good on there own and would be amazing surround sound system.

 

Prefer local pick up due to there weight. Plus don't have the original boxes.

 

 

 

 

  • AMC 2N100-5 - Solid State Amplifier 5-Channel 5x150w

INTRODUCTION

Powerful, convenient. These are the terms used by our customers to describe the 2N100MKII & 2N100-2, 2 channel amplifier from AMC. Amplifiers reproducing these dynamic signals must do so without interfering with each other. In high quality amplifiers, circuit design is critical in order to achieve maximum performance and exceptional sound. Each output of the amplifier is powered by an independent "Power Module"(tm). Each module is identically constructed, allowing completely independent management of signals from input to output. This concept enables each channel to monitor heat, current, signal, and power separately, thus greatly reducing crosstalk and increasing dynamic range and efficiency. The Power Module utilizes a unipolar output insuring proper phase and matching between channels. The Power Module(tm), design utilizes high current output devices in conjunction with a commutating, or dual voltage power supply and oversized toroidal transformer that in combination, delivers up to 20% more power than normal amplifiers of the same size. The 2N100 amplifiers are capable of delivering massive amounts of power into low impedance loads exhibited by virtually all modern loudspeakers.

The 2N100 Series amplifier uses high quality speaker binding posts that can accommodate large gauge speaker cables or banana plugs. Input jacks are supplied with parallel outputs that can be used for bi-amping or sharing signals.

SPECIFICATIONS

Rated Power into 8 ohm / 4 ohm (IHF)

150W / 240W

Rated THD and IMD

<0.03%

1 KHz Clipping Power into 8 ohm / 4 ohm

160W / 230W

Dynamic Power into 8 ohm / 4 ohm

255W / 360W

Dynamic Headroom

1.7dB

Current limit @ .1 ohm and 1 ohm

30 Amps

Output offset

+/-10mV Max

S/N Ratio for 1W/8 0hm

>102dB ("A" wtd)

Input voltage for 100 watts

1 Vrms

Frequency Response

 

20Hz-20KHz

+/-.3dB

 

-3dB

4Hz&75KHz

Separation

>70dB @ 20KHz

Damping Factor

>200

Input Impedance

22K/150pf

DIMENSIONS (W x D x H)

 

2N100MKII, 2N100-2 & 2N100-3

17in x13in x 5in

 

2N100-5

17in x 14in x 7in


 Weight 37 lbs

 

 

Integrated preamplifer DHC-80.1

THX Ultra2 Plus, 3-Zone, 9.2 Channel Network Preamplifier/Processor

 

 

Amplifier Section 

  • THD (1Vrms) - 0.05%
  • Input Sensitivity and Impedance - 200 mV/47 k?(LINE), 2.5 mV/47 k?(PHONO MM)
  • Output Level and Impedance - 200 mV/470 k?(REC OUT)
  • Frequency Response - 5 Hz–100 kHz/ +1 dB-3 dB (LINE)
  • Tone Control - ±10dB, 50 Hz(BASS), ±10dB, 20 kHz(TREB)
  • Signal to Noise Ratio - 110 dB (LINE, IHF-A), 80 dB (PHONO, IHF-A)

Video Section 

  • Input Sensitivity/Output Level & Impedance - 1 Vp-p/75 ? (Component and S-Video Y), 0.7 Vp-p/75 ? (Component Pb/Cb, Pr/Cr), 0.28 Vp-p/75 ? (S-Video C), 1 Vp-p/75 ? (Composite)
  • Component Video
  • Frequency Response - 5Hz - 100MHz, -3 dB

Tuner Section 

  • FM Tuning Frequency Range - 87.5 MHz– 107.9 MHz
  • AM Tuning Frequency Range - 530 kHz–1710 kHz
  • Preset Channels - 40

General 

  • Dimensions (W X H X D) - 435 × 198.5 × 445 mm
  • Weight - 13.5 kg

 

 

 

 

 

SVS MBS-01 Speaker  

 

Speaker: MBS-01 

Type: Two-way, stand-mount 

Tweeter (size in inches, type): 1, silk dome 

Woofer (size in inches, type): 6.5, Nomex cone (1) 

Nominal Impedance (ohms): 8 

Recommended Amp Power (watts): 20–250 

Available Finishes: Black vinyl with Gloss Black, Dimensions (W x H x D, inches): 10.3 x 16 x 13 

Weight (pounds): 27 12.2 kilos each

 

 

http://www.avsforum....1-mcs-01-a.html

 

 

 

SVS MTS O2 Tower speakers  

 

Model Name MTS-02
Configuration 2 1/2-way mid-sized center speaker
Design Sealed or vented modes
Dimensions (Grills included) 41" x 10 " x 13 "
H x W x D 1041mm x 254mm x 330mm
Weight 60lbs (27.5kg)
Drivers Tweeter Single 1" (25mm) Soft dome ScanSpeak "AirCirc"
Woofer Twin 6.5 " (165mm) Peerless Nomex cone
Frequency Response (Anechoic) 60Hz to 30kHz +/- 3dB (click here for response chart)
Nominal Impedance 6 ohms
Sensitivity 91dB
Power Handling 20W - 250W
Magnetically Shielded? Yes
Mounting Options No-cost optional floor supports with plated steel cone or foam disks
Enclosure Material MDF w/ internal bracing, laminated arch top
Finish Textured black polymer front/back/lower sides, premium veneer or gloss black side accent panels

 

 

SVS MCS 02 centre channel speaker  

 

Model Name MCS-02
Configuration 2-way mid-sized center speaker
Design Sealed or vented modes
Dimensions (Grills included) 10" x 24 " x 13 "
H x W x D 254mm x 610mm x 330mm
Weight 39lbs (17.5kg)
Drivers Tweeter Single 1" (25mm) Soft dome ScanSpeak "AirCirc"
Woofer Twin 6.5 " (165mm) Peerless Nomex cone
Frequency Response (Anechoic) 65Hz to 30kHz +/- 3dB (click here for response chart)
Nominal Impedance 6 ohms
Sensitivity 89dB
Power Handling 20W - 250W
Magnetically Shielded? Yes
Mounting Options Threaded inserts for wall bracket
Shelf/stand mount with low-profile foam disk
Enclosure Material MDF w/ internal bracing, laminated arch side panels
Finish Textured black polymer front/back, full-size premium veneer or gloss black top and bottom

 

MTS-02 and MCS-02 review

 

 

 

The SVS M-Series/02 speakers are a line of home theater speakers. The MTS-02 tower speakers have a claimed frequency response of 38 Hz to 24kHz, and an 88.5 dB sensitivity.

 

 

http://www.hometheat...-02-review.html

 

SVS PB Ultra 13       

 

 

Enclosure Specs:

Dimensions: 22.5" (H) x 20.5" (W) x 27" (D)Weight: 155 pounds 70.3 kilo

Rigid and braced Medium Density Fiberboard (MDF) cabinet

Black gloss or full veneer black oak finish

Front-firing driver

Front-firing triple 3.5" high-flow flared ports

Dense foam port blockers (3) included

Variable 20 Hz, 16 Hz and Sealed tuning modes

Protective non-resonant steel mesh grille

 

Driver Specs:

SVS 13.5†extreme performance underhung Ultra driver

SVS custom-tooled die-cast aluminum basket 

Flat-wire, 3†diameter, high-power, high-temp, 8-layer, aluminum voice coil

Polyimide impregnated fiberglass former/bobbin

Dual 9", composite layered, linear roll, extreme excursion spiders

Integrated tinsel leads

Nickel-plated high-tension spring terminals

 

Proprietary injection molded gasket and parabolic SBR extreme-excursion surround

Composite pulp/fiberglass press layered cone with stitched surround

Low carbon 1008 steel components, electrophoresis black plating

Finite Element Analysis (FEA)-optimized underhung motor structure for the lowest possible distortion

Copper shorting sleeve reduces gap induction and distortion, and enhances thermal conductivity

Dual Genox 8H/Y-35 high grade ferrite magnets

Oversized pole vent for greater cooling and low noise

 

Amp Specs:

STA-1000D Sledge with 1000 watts RMS continuous power (3600 watts peak dynamic power)

High efficiency cool-running Class D switching topology

Detachable power cord with main power switch and ceramic fuse

RoHS compliant, lead-free construction and world-wide safety certifications

Auto-On / On switch with "green" standby mode

Stereo line-level RCA and balanced (XLR) input/output connections

Normal and Hi input voltage switch

Customized EQ and DSP limiter settings specifically for the PB13-Ultra

Variable tuning with 20Hz, 16Hz, and Sealed settings to match subwoofer port settings

Fully adjustable (frequency and slope) phase-correct speaker/sub digital crossover 

Intelligent Feature Control (IFC) with bright LCD display

Two (2) digital PEQs with adjustable frequency, cut/boost, and Q values

Room gain compensation control with adjustable frequency andslope

Adjustable digital delay on main speaker line-level outputs to time-align the speakers and subs

 

 

 

http://www.hometheat...ser-review-876/

 

 

unnamed-1.jpg

unnamed-2.jpg

unnamed-3.jpg

unnamed-4.jpg

unnamed.jpg

s-l1600-1.jpg

s-l500.jpg

s-l1600.jpg

s-l64.jpg

Edited by audiohifiaudio
  • Like 2
Link to comment
Share on other sites



58 minutes ago, srms said:

"My adult children will not move from home"

Put up their rent until they do move! emoji44.png

Sent from my SM-N910U using Tapatalk
 

Good luck with that. Your parent for life specially these days. Charge them Yeah right. LMAO

Link to comment
Share on other sites





  • 1 month later...
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...
To Top