Krell_audio Posted March 14, 2017 Share Posted March 14, 2017 (edited) Item: Mark Levinson No.39 CD Processor Location: Perth, Western Australia Price: $2695.00 ono Condition: 9 / 10 No Marks or scratches Reason for selling: Taking my system in a different direction Payment Method: PayPal, Cash on pick up, Direct Bank Transfer Extra Info: For Sale is my Mark Levinson No.39 CD Player. This in my opinion is one of the very best-sounding digital spinners of its time. So much so I have owned 4 over the years. Unit is in excellent condition and working order. Comes with Remote Control and Original double boxes. Auditioning is welcome here in Perth. Pick up would be preferred but can send at buyers expense and risk. Please feel free to email any questions you may have. Mark Levinson No.39 Factory Specs: Frequency Response: 10Hz - 20kHz, +0dB, -0.3dB Total Harmonic Distortion: (THD) 0.002% @ 1kHz, 0dBFS (10Hz - 30kHz) Dynamic Range: 96dB (10Hz - 30kHz) Signal-to-Noise Ratio: 105dB (10Hz - 30kHz) Channel Separation: Better than 110dB Intermodulation Distortion: (SMPTE IMD) Less than 0.005% Maximum Output: 4.45V balanced (0 dBFS signal) 2.225V single-ended Volume Control: (attenuation) Range 61.2 to +12dB Digital-to-Analog Conversion: Dual differential 24-bit DACs Conversion Rate: 352.8kHz or 384kHz (input signal dependent), 24-bit Analog Filter: Bessel-tuned, linear phase to 40kHz Low-level Linearity: Deviation less than 2dB to below -90dBFS less than 2dB to below -102dBFS w/20-bit input Output Impedance (analog): 10Ω Direct Digital Output, XLR: AES/EBU 110Ω, 3.5V Direct Digital Output, RCA: S/PDIF 75Ω, 0.5V Mains Voltage: 100V, 120V, 200V, 220V, 240V, factory set for destination country Mains Frequency: 50 or 60Hz, factory set for destination country Power Consumption: 36 watts maximum Overall dimensions: width: 15.75" (40cm) height: 3.84" (9.75cm) depth: 14.3" (36.3cm) 20.56" (52.21cm) with loader open Input Complement: (1) EIAJ digital input (1) S/PDIF (RCA) digital input Output Complement: (2) male XLR balanced audio outputs (2) RCA single-ended audio outputs (1) AES/EBU (XLR) digital output (1) S/PDIF (RCA) digital output Other I/O: (2) RJ-45 modular Communication Links (1) 3.5mm external IR input jack (1) IEC AC mains connector Shipping Weight: 50lbs (23kg) Pictures: Edited March 19, 2017 by Krell_audio Price drop Link to comment Share on other sites More sharing options...
Darren69 Posted March 14, 2017 Share Posted March 14, 2017 17 posts since 2013? You're a lurker Nathan. GLWTS, looks nice. @Winter ? Link to comment Share on other sites More sharing options...
Winter Posted March 14, 2017 Share Posted March 14, 2017 1 hour ago, Darren69 said: 17 posts since 2013? You're a lurker Nathan. GLWTS, looks nice. @Winter ? Hi. I had the 39 and the 390s years ago. Not to keen on the transport. But good built in pre (digital). 1 Link to comment Share on other sites More sharing options...
Krell_audio Posted March 19, 2017 Author Share Posted March 19, 2017 On 14/03/2017 at 1:45 PM, Krell_audio said: Item: Mark Levinson No.39 CD Processor Location: Perth, Western Australia Price: $2695.00 ono Condition: 9 / 10 No Marks or scratches Reason for selling: Taking my system in a different direction Payment Method: PayPal, Cash on pick up, Direct Bank Transfer Extra Info: For Sale is my Mark Levinson No.39 CD Player. This in my opinion is one of the very best-sounding digital spinners of its time. So much so I have owned 4 over the years. Unit is in excellent condition and working order. Comes with Remote Control and Original double boxes. Auditioning is welcome here in Perth. Pick up would be preferred but can send at buyers expense and risk. Please feel free to email any questions you may have. Mark Levinson No.39 Factory Specs: Frequency Response: 10Hz - 20kHz, +0dB, -0.3dB Total Harmonic Distortion: (THD) 0.002% @ 1kHz, 0dBFS (10Hz - 30kHz) Dynamic Range: 96dB (10Hz - 30kHz) Signal-to-Noise Ratio: 105dB (10Hz - 30kHz) Channel Separation: Better than 110dB Intermodulation Distortion: (SMPTE IMD) Less than 0.005% Maximum Output: 4.45V balanced (0 dBFS signal) 2.225V single-ended Volume Control: (attenuation) Range 61.2 to +12dB Digital-to-Analog Conversion: Dual differential 24-bit DACs Conversion Rate: 352.8kHz or 384kHz (input signal dependent), 24-bit Analog Filter: Bessel-tuned, linear phase to 40kHz Low-level Linearity: Deviation less than 2dB to below -90dBFS less than 2dB to below -102dBFS w/20-bit input Output Impedance (analog): 10Ω Direct Digital Output, XLR: AES/EBU 110Ω, 3.5V Direct Digital Output, RCA: S/PDIF 75Ω, 0.5V Mains Voltage: 100V, 120V, 200V, 220V, 240V, factory set for destination country Mains Frequency: 50 or 60Hz, factory set for destination country Power Consumption: 36 watts maximum Overall dimensions: width: 15.75" (40cm) height: 3.84" (9.75cm) depth: 14.3" (36.3cm) 20.56" (52.21cm) with loader open Input Complement: (1) EIAJ digital input (1) S/PDIF (RCA) digital input Output Complement: (2) male XLR balanced audio outputs (2) RCA single-ended audio outputs (1) AES/EBU (XLR) digital output (1) S/PDIF (RCA) digital output Other I/O: (2) RJ-45 modular Communication Links (1) 3.5mm external IR input jack (1) IEC AC mains connector Shipping Weight: 50lbs (23kg) Pictures: Price drop Link to comment Share on other sites More sharing options...
Krell_audio Posted April 7, 2017 Author Share Posted April 7, 2017 Price reduced $2495 Link to comment Share on other sites More sharing options...
Recommended Posts