Jump to content

Sign in to follow this  
Gieseler Audio

GIESELER KONVERTER (DAC/Preamp) Official release.

Recommended Posts

Dan I could certainly look at that as option. Fortunately due to it's modular construction it is only the PSU board that would need to be altered to add that feature plus a small bit of code. I would need a different switch with red/blue lumination to show standby & on but that should be no problem. A different remote too as I'm currently using all the buttons. OK Ieave it with me & as I get a bit of spare time I'll have a shot at it.

Share this post


Link to post
Share on other sites

No major rush. I'm still out of the country for a few months but I know for myself it would be a great addition.
Looking forward to hearing it when I'm back.

Sent from my JAZZ using Tapatalk

Share this post


Link to post
Share on other sites
9 hours ago, Gieseler Audio said:

Dan I could certainly look at that as option. Fortunately due to it's modular construction it is only the PSU board that would need to be altered to add that feature plus a small bit of code. I would need a different switch with red/blue lumination to show standby & on but that should be no problem. A different remote too as I'm currently using all the buttons. OK Ieave it with me & as I get a bit of spare time I'll have a shot at it.

 

This would put it back on my radar.

 

Now you just need to also make it a Roon endpoint :sarc:. That would make it awesome but I'm sure a massive ask.

Share this post


Link to post
Share on other sites
11 hours ago, blybo said:

 

This would put it back on my radar.

 

Now you just need to also make it a Roon endpoint :sarc:. That would make it awesome but I'm sure a massive ask.

 

Hide a little microRendu board in there - power it with the LPS - hole in the back for the ethernet - DONE! :party

 

 

Share this post


Link to post
Share on other sites


On 23/02/2017 at 6:47 PM, bhobba said:

The owner of the MAC is waiting for Audirvana 3.

 

Audirvana 3 released

 

That's not going to help much though - the Mac I have access to is not powerful enough to run Audirvana 3.

 

Looks like I will have to dig into my dwindling funds (Yuk) and get a Mac powerful enouht to do it:

http://www.ebay.com.au/itm/Apple-Macbook-Air-Early-2014-13-Inch-Core-i5-SSD-Laptop-Notebook-Computer-/201726553110?hash=item2ef7d6ec16%3Ag%3Axf0AAOSwo4pYbjvo

 

One I have that and install Audirvana 3 will lend it to Clay and see what it does with his Dac's and compare it to a Meridian Explorer 2 I have - after I have  mucked around with it of course.  I particularly want to compare it to MQA via the Bridge 2 to Audirvana 3.  But it will be a month or 2 before the Direct Stream Bridge 2 does MQA.  At the moment, the Bridge 2 its not as good as Audirvana (or the Konverter from memory) and a Curios cable but will see with MQA - it should be out for the Bridge 2 in a a month or two.

 

You guys will have to decide - are you happy with only Clay doing such a comparison and writing it up or is something more independent is also required?   My vote goes to both - but the independent one will take a while to organize, probably at a GTG or something like that.

 

BTW Clay is a VERY upfront sort of guy - if something is better than his product he will say so.  But I know that simply because I have known Clay for yonks - others likely will not know Clay that well.

 

Thanks

Bill

Edited by bhobba

Share this post


Link to post
Share on other sites

According to the thread on CA forum Audirvana 3.0 seems to be VERY good and the upcoming Audirvana 3.1 will enable streaming to microrendu etc..

There are reports that Audirvana sounds even better than Roon and Roon is VERY expensive.

These devices are on my short list for digital setup:

*Macbook Pro

*Audirvana 3.x.x

*Clays upcoming USB only/DAC only with the technique from the Konverter

BTW, some interesting thoughts about MQA:

http://positive-feedback.com/audio-discourse/questions-answers-mqa-interview-andreas-koch/

 

Matt

Edited by matth

Share this post


Link to post
Share on other sites
On 2017-3-18 at 3:06 AM, matth said:

According to the thread on CA forum Audirvana 3.0 seems to be VERY good and the upcoming Audirvana 3.1 will enable streaming to microrendu etc..

BTW, some interesting thoughts about MQA:

http://positive-feedback.com/audio-discourse/questions-answers-mqa-interview-andreas-koch/

 

Good to know about 3.1 as that's how I use my Direct Stream - via the Bridge 2.   Hopefully it will support the Bridge 2.

 

Regarding MQA some people are just so cynical.  The article is true - as far as it goes.  Yes it can be seen as a cynical exercise to get more royalties.  But it doesn't give all the technical facts:

 

1.  Its very easy for services like Tidal to incorporate.

2.  Its not lossless, but only lossy in inaudible ways I will list:

The last 8 bits that store the compressed 22-44khz info are below the noise floor of virtually all recordings, random sounds below that are of not of much concern even if nothing was done. But something is done.  What you do is from the 24 bits you subtract the compressed data from last 8 bits, chop it off then put in the 8 bits you subtracted.  This is a form of subtractive dither and increases bit depth to above 16 bits - see the graphs below - notice how it lies about 2/3 of the way between 16 and 24 bits.

9-hd.png

Notice the following.  The theoretical noise is always within about 10db of the thermal noise limit that its impossible to go below and WAY below the noise of an actual implementation such as the Explorer 2.

 

3.  It interpolates to go from 44k to 88k, 176k or beyond.   But since this is mostly noise who really cares - that is of course very lossy but since its mostly noise it represents just some more noise added in. But that high in frequency the noise added in is WAY below the thermal noise limit.  So why do it?  Because it reduces impulse response time which it is claimed to be audible.

 

It's a practical solution to the problem of streaming hi res within our current infrastructure.

 

Thanks

Bill 

Edited by bhobba

Share this post


Link to post
Share on other sites


Hi Guys,

I'm rather excited at the moment as I have just finished populating the brand new digital front end PCB for the Konverter.

If you look closely you can see some of the ultra low noise Linear Technology LT3045  regulators. 0.8uV RMS (10Hz to 100kHz)

I'm just filling a couple of orders & have been waiting on the new PSU & digital boards which arrived this week.IMG_0857.thumb.JPG.060da0478ba8541cd83abb87278b6ed5.JPGIMG_0852.thumb.JPG.ee33059b8d4a29e76b3ae563f5710832.JPG

Share this post


Link to post
Share on other sites
11 hours ago, bhobba said:

Yes it can be seen as a cynical exercise to get more royalties.  

 

Sorry Bill,

but this is exactly how I see MQA.

 

Matt

Share this post


Link to post
Share on other sites


Hi Matt,

probably on the DAC only only I will use a bigger single board that includes the power supply section as well.

It will make for a tidier  build with no wiring needed. With the Konverter it has a massive preamp board so it worked out better to 

seperate the PSU, digital & preamp sections. The new DAC will look exactly the same front on to the konverter but just in a smaller case. Definately a USB only input version too. The digital circuit/design & PSU will be almost identical on the DAC only so lead time will be fairly quick. As soon as I complete my current Konverter orders I will get right on it. Now can you help me come up with a good German name for the new DAC please!

Share this post


Link to post
Share on other sites

@Gieseler Audio

Hi Clay,

what about GIESELER WANDLER?

Wandler is the german translation of converter.

The Germans say: Digital-Analog-Wandler for DAC.

It would be nice because both your name and the name of the DAC end with LER.

 

Matt

Edited by matth

Share this post


Link to post
Share on other sites
30 minutes ago, matth said:

@Gieseler Audio

Hi Clay,

what about GIESELER WANDLER?

Wandler is the german translation of converter.

The Germans say: Digital-Analog-Wandler for DAC.

It would be nice because both your name and the name of the DAC end with LER.

 

Matt

I'm a wandler, yeah wandler.  I move around around around........

 

Share this post


Link to post
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...